phrygiann
Max Output Level: -88 dBFS
- Total Posts : 137
- Joined: 2009/09/01 13:56:32
- Status: offline
LP64
I opened the LP64 and X2 crashed
Windows 7 Home Premium 64-bit; AMD Phenom™ II quad-core processor 820; 8GB DDR3 SDRAM; 3.1GHz oc'd; 1TB hard drive; 1 TB 2nd hdrive, 1 TB usb 3.0 external HD. Roland Quad-capture, Casio PX-310; senheisser MK-4, Shure SM-58; Senheisser HD 380 pro, krk rokit6. Subaru forester 2012.
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Is that the "improvement"?
Have you tried again and had better luck?
best regards,
mike
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
No - the improvement is that with the LP64 gui open and a project playing - you can drag nodes all over the screen without a glitch.
I believe this is intended behaviour.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
SvenArne
Max Output Level: -48 dBFS
- Total Posts : 2719
- Joined: 2007/01/31 12:51:29
- Location: Trondheim, Norway
- Status: offline
mike_mccue
Is that the "improvement"?
Classic McMike! Seriously, I used tried the LP on a CPU-intensive project and its performance is VASTLY improved. Heard a couple of clicks while moving nodes around, though...
|
daveny5
Max Output Level: 0 dBFS
- Total Posts : 16934
- Joined: 2003/11/06 09:54:36
- Location: North Carolina
- Status: offline
I loaded LP-64 and it didn't crash.
One thing I did prior to installing X2 was to clean up my VSTs. I got rid of probably a hundred audio FX and softsynths that I wasn't using and were probably gumming up the system. I'm sticking mostly with the Cakewalk provided tools. There's enough of them to cover just about every recording need and learning how to use them properly will take more time than I have.
Dave Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic. Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Make sure that you installed the latest LP64 that came with X2. If you chose not to update the included plugins you may still have the old version. Also make sure you don't have multiple versions of the same plugin in your scan path since it will pick the first one it finds.
|
mattplaysguitar
Max Output Level: -55.5 dBFS
- Total Posts : 1992
- Joined: 2006/01/02 00:27:42
- Location: Gold Coast, Australia
- Status: offline
Noel Borthwick [Cakewalk
]
Also make sure you don't have multiple versions of the same plugin in your scan path since it will pick the first one it finds.
Thanks for that one! Saves me asking the question I was about to ask!
|
phrygiann
Max Output Level: -88 dBFS
- Total Posts : 137
- Joined: 2009/09/01 13:56:32
- Status: offline
How do I install latest plug ins that came with X2? I choose the *Basic( recommended) not the *Advanced when I installed and I can see in my plug ins that there are no duplications. the LP64 vst ID in the plug ins manager is "1129802865" is this the new ID number or this not relevant?
Windows 7 Home Premium 64-bit; AMD Phenom™ II quad-core processor 820; 8GB DDR3 SDRAM; 3.1GHz oc'd; 1TB hard drive; 1 TB 2nd hdrive, 1 TB usb 3.0 external HD. Roland Quad-capture, Casio PX-310; senheisser MK-4, Shure SM-58; Senheisser HD 380 pro, krk rokit6. Subaru forester 2012.
|
phrygiann
Max Output Level: -88 dBFS
- Total Posts : 137
- Joined: 2009/09/01 13:56:32
- Status: offline
Please help!!
I can see a Date modified beside the LP64.dll its 9/14/2012 1:44 PM, is this the new one? can I delete these two plug-ins only and reinstall again with out reinstalling the whole X2? How?
Gliss and span is the only audio Fx I have plus the Fx that comes from cakewalk.
how to attach image here?
Windows 7 Home Premium 64-bit; AMD Phenom™ II quad-core processor 820; 8GB DDR3 SDRAM; 3.1GHz oc'd; 1TB hard drive; 1 TB 2nd hdrive, 1 TB usb 3.0 external HD. Roland Quad-capture, Casio PX-310; senheisser MK-4, Shure SM-58; Senheisser HD 380 pro, krk rokit6. Subaru forester 2012.
|
mattplaysguitar
Max Output Level: -55.5 dBFS
- Total Posts : 1992
- Joined: 2006/01/02 00:27:42
- Location: Gold Coast, Australia
- Status: offline
Well unless you had SONAR long before the rest of us, that's from your X1 installation. Delete that and ensure the new LP64 is in there. I had both and it was only picking up the old one so wasn't updated, but deleted the old and all good now.
|
phrygiann
Max Output Level: -88 dBFS
- Total Posts : 137
- Joined: 2009/09/01 13:56:32
- Status: offline
If I delete it how will I ensure that the new LP64 is in there? and where will I delete. is it in the Program files>cakewalk>Plug-ins>LP64? can I just delete the LP64.dll or the whole LP64 folder? After I delete it what will I do?
thanks.
Windows 7 Home Premium 64-bit; AMD Phenom™ II quad-core processor 820; 8GB DDR3 SDRAM; 3.1GHz oc'd; 1TB hard drive; 1 TB 2nd hdrive, 1 TB usb 3.0 external HD. Roland Quad-capture, Casio PX-310; senheisser MK-4, Shure SM-58; Senheisser HD 380 pro, krk rokit6. Subaru forester 2012.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Mine has the same date as yours. It works just fine. I'm not sure how it could have a more recent one.
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
You can check the current version by right clicking in explorer and picking properties and then looking at the details tab.
Version 19.0.0.306 is the latest version for LP64Multiband_64.dll (size 2646 KB) as well as LP64_EQ_64.dll (size 2633 KB) As long as you don't have those same dll's in other locations in your VST path you are good. If those dll's are current there is no need to reinstall.
Do you crash whenever you try and load the plugin and did you have X1 installed prior to X2? Also try loading in a new project.
|
mattplaysguitar
Max Output Level: -55.5 dBFS
- Total Posts : 1992
- Joined: 2006/01/02 00:27:42
- Location: Gold Coast, Australia
- Status: offline
Oh, I read 'date created', not 'date modified'. Mine is 14th as well.
My bad. Delete the other one, and keep the 'modified 14th Sept' one.
They were working on it up till the 14th, hey?! It's actually interesting to look into some of the plugs and see when they were last worked on! Rapture was mid 2010 since the last re-work. R-Mix was sorted a month ago. Breverb on the 10th. Linear Phase plugs look like the last to be tweaked!
|
phrygiann
Max Output Level: -88 dBFS
- Total Posts : 137
- Joined: 2009/09/01 13:56:32
- Status: offline
I have X1 instaled prior to X2 installation but didnt experience that on X1. I noticed this with loading the old project from 8.5 producer and tried it on X1. when I first play this project on X2 I hear I hear garbled sound then paused and tried to disable or even delete it its then that will start to have a white screen then crash... I tried a new project and load and played , same thing sound is garbled and when I try to delete it sonar will crash but will not crash when clicking the power/on button on LP64. I tried to open also the LP6 multiband it displays only the square boxes not the knobs, graphs etc.
how can I attach a pictures here?
I will try to recreate again and try to make a video of it but thinking how do I send it to cakewalk? or is it ok to post in youtube (private) and post the link here?
Windows 7 Home Premium 64-bit; AMD Phenom™ II quad-core processor 820; 8GB DDR3 SDRAM; 3.1GHz oc'd; 1TB hard drive; 1 TB 2nd hdrive, 1 TB usb 3.0 external HD. Roland Quad-capture, Casio PX-310; senheisser MK-4, Shure SM-58; Senheisser HD 380 pro, krk rokit6. Subaru forester 2012.
|
phrygiann
Max Output Level: -88 dBFS
- Total Posts : 137
- Joined: 2009/09/01 13:56:32
- Status: offline
Windows 7 Home Premium 64-bit; AMD Phenom™ II quad-core processor 820; 8GB DDR3 SDRAM; 3.1GHz oc'd; 1TB hard drive; 1 TB 2nd hdrive, 1 TB usb 3.0 external HD. Roland Quad-capture, Casio PX-310; senheisser MK-4, Shure SM-58; Senheisser HD 380 pro, krk rokit6. Subaru forester 2012.
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
No crash here. Works fine.
|