Helpful ReplyLost oputput to Quad Capture

Author
Post
Essentials Only Full Version
mauryw
Max Output Level: -82 dBFS
  • Total Posts : 445
  • Joined: 2004/12/18 12:55:55
  • Location: Santa Barbara, CA
  • Status: offline
2017/09/08 22:45:50 (permalink)

Lost oputput to Quad Capture

Brand new project was playing back thru my Roland Quad.  Then shut down and reboot and now Sonar meters are outputting, but the Quad is not receiving signal and not sending to my speakers.  Separte projects do not come out the speakers.  Any idea what happened to my signal?

Larry Williams

A process can not be understood by stopping it. One must flow with it and become one.

SONAR Platinum x64, WIN 7 Pro x64, i5-2500K, z68 mobo, 8 Gb RAM, Roland Quad-Capture, 2 SSds, 3 SATA HDDs
#1
List Solutions Only

3 Replies Related Threads
    CedricM
    Max Output Level: -88 dBFS
    • Total Posts : 128
    • Joined: 2015/05/11 05:07:43
    • Status: offline
    Re: Lost oputput to Quad Capture 2017/09/09 10:03:44 (permalink)
    Strange.
    Is the configuration of the Quad still valid in Sonar ?
    Are the Asio Parameters the same in Sonar and in the Quad Capture control panel ?
     
    Something general you can try after having restarted Windows & checked your drive: delete all temporary files and folders*. Then start Sonar.
     
    * Windows + R keys. Enter %tmp% in field open then click ok. Check that you are in the temp folder, select all, delete all. Note: It may well be that you can't delete everything, that's ok, some temp files are opened.
     
    #2
    THambrecht
    Max Output Level: -73 dBFS
    • Total Posts : 867
    • Joined: 2010/12/10 06:42:03
    • Location: Germany
    • Status: offline
    Re: Lost oputput to Quad Capture 2017/09/09 12:54:36 (permalink)
    The two Knobs for output and playback in the right position?
    Checked with a headphone?
    USB LED shines green?
     

    We digitize tapes, vinyl, dat, md ... in broadcast and studio quality for publishers, public institutions and individuals.
    4 x Intel Quad-CPU, 4GHz Sonar Platinum (Windows 10 - 64Bit) and 14 computers for recording tapes, vinyl ...

    4 x RME Fireface 800, 2 x Roland Octa Capture and 4 x Roland Quad Capture, Focusrite .... Studer A80, RP99, EMT948 ...

    (Germany)  http://www.hambrecht.de
    #3
    Sidroe
    Max Output Level: -55.5 dBFS
    • Total Posts : 1954
    • Joined: 2010/11/10 18:59:43
    • Location: Macon,Georgia
    • Status: offline
    Re: Lost oputput to Quad Capture 2017/09/09 14:01:24 (permalink) ☄ Helpfulby Cat Cave 2017/09/10 00:09:23
    I have had this same problem with 2 Studio-Captures. If you are using the ASIO driver, sometimes Sonar will crash the driver. Especially, after using another audio program that is set to use the ASIO driver. DO NOT RE-BOOT!! It never worked for me. Choose to RE-START when you shutdown. It always brings back the ASIO driver. This has always worked for me.  

    Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!
    #4
    Jump to:
    © 2024 APG vNext Commercial Version 5.1