Hello,

I really need your help for following issue. Could you help me if possible?

I'm connecting my mixer to 5-6 line-in connection; but it not work as stereo, so I can't panning.

1. I have checked all cables.
2. When I'm connecting monitors directly to mixer, it is working normal.
3. I can hear everything as stereo with headphone from mixer and soundcard.
4. I tryed enable/disable channel link in DSP mix application.

As a result, all of my tests said that, my 5. and 6. inputs not working as a normal. I'm insorting only 1 cable, 2 monitors playing together etc...
p.s, I tryed connect my yamaha keyboard to 5-6 line inputs but...
I've tryed everything with different cables (XLR and/or TRS, new cables...) and configurations.

Thanks and regards.

The UR44 has inputs 5 & 6 which are mono inputs. You can connect the L&R output of your mixer to the these inputs and then you would control the panning from your mixer.  
I you instead want to pluga mono source input into inputs 5 and/or 6, you would use your DAW to pan then. 
If you are live monitoring your 5&6 inputs, you would use the UR44's mixer and pan then inputs how you want.
 
Or, maybe you are having an issue with making the UR44's inputs available in Sonar?

Hello,

I connected Mixer main L/R outputs to the UR44 5/6 inputs; but unfortunatly I can't pan it via mixer. I want to do this.
My mixer has both xlr and trs L/R main outputs, I tryed both of them.

When I connect monitor headphone to the mixer, panning is working.
When I connect monitor headphones to the soundcard, unfortunately it is not working as stereo, so I can't panning.
It seems that line 5/6 inputs not working as expected..

How can I do? Could you help me checking my settings etc.

Thanks again for your reply, regards.

Rimshot
The UR44 has inputs 5 & 6 which are mono inputs. You can connect the L&R output of your mixer to the these inputs and then you would control the panning from your mixer.  
I you instead want to pluga mono source input into inputs 5 and/or 6, you would use your DAW to pan then. 
If you are live monitoring your 5&6 inputs, you would use the UR44's mixer and pan then inputs how you want.
 
Or, maybe you are having an issue with making the UR44's inputs available in Sonar?

Sorry, I can't quote from the topic, answered it.

I am confused. 
You connect your L and R outputs of your mixer into the UR44's inputs 5 and 6.
If anything is plugged into your mixer and sent out of the L and R outputs, you can't pan it?
Are the L and R outputs of your mixer mono outputs or stereo? 
Do yo have the proper cords hooked up going from your mixer into the UR44?

Yes, my mixer has 2 stereo outputs, you can see details at http://usa.yamaha.com/products/live_sound/mixers/analog-mixers/mg_xu_model/mg10xu/

When I insort an audio source to mixer, I can pan and monitor directly to the mixer; but If I use soundcard for monitoring, unfortunately it's not...
I checked and tryed different cords lot of time.

P.s: If I insort only 1 cable to 5 or 6, 2 monitors (headphone left and right) working together as mono.


What shall I do sir? :(

OK. 
Please watch this video:
http://www.screencast.com/t/V9MzEY8da3Qh
 
I have a mini stereo plug with two mono 1/4" plugs at the end. 
I took the mini stereo out of my iPhone and plugged each mono chord into inputs 5 and 6 on the UR44.
I then opened the UR44 mixer and brought up channel 5 and could pan the signal and the same with channel 6. 
Let's see if we can get your UR44 to do the same before we go to the DAW.
 
http://www.screencast.com/t/V9MzEY8da3Qh]http://www.screencast.com...ast.com/t/V9MzEY8da3Qh[/link]

Rimshot
OK. 
Please watch this video:
http://www.screencast.com/t/V9MzEY8da3Qh
 
I have a mini stereo plug with two mono 1/4" plugs at the end. 
I took the mini stereo out of my iPhone and plugged each mono chord into inputs 5 and 6 on the UR44.
I then opened the UR44 mixer and brought up channel 5 and could pan the signal and the same with channel 6. 
Let's see if we can get your UR44 to do the same before we go to the DAW.
 
http://www.screencast.com/t/V9MzEY8da3Qh]http://www.screencast.com...ast.com/t/V9MzEY8da3Qh[/link]

Sir,

You are very helpful, thanks again.

Unfortunately, as I mentioned before, I'm a blind person and can't see your screen cast :(
An other thing, only Steinberg control software is not accessible in the market with screen reader.
Is it possible to connect my computer with teamViewer etc. for set these settings for me?
I'm very sorry for disturbing you.
Could you send your Skype ID or an other communication way via Private message?

Best regards, thanks a lot again.

I am sorry. I will get a hold of you on Sunday. I did not know or remember you were blind. That helps me. 
What country are you in?
 
 

Rimshot
I am sorry. I will get a hold of you on Sunday. I did not know or remember you were blind. That helps me. 
What country are you in?
 
 

  Dear Rimshot,

I really don't know how can I say thank you.

One of my friend watched your screen cast and adjust my DSPMixFX settings and... problem has been solved!
Now channel 5/6 working properly :)

After adjusting settings, some tisss sound coming from my monitors :))

Do you have any thought on that?

Thanks a lot!