New Build - Bad Interface noise

2017/02/08 12:30:50

Jim Roseberry

abacab

No need to add a PCIe card. Your motherboard has USB2.0 connector pins onboard already. Just add a cheap rear chassis bracket that supplies the cable connectors.

+1
These USB-2 brackets are ~$6 (connect to a USB-2 header on the motherboard)... and it'll be using an Intel USB controller.

2017/02/08 12:36:51

fireberd

Jim, The USB 2.0 connector (there is only 1) on the motherboard is being used by the Corsair H100i CPU cooler. Had to add a PCIe card (and after adding the USB 2.0 port card the floppy diskette drive works perfect).

2017/02/08 13:54:12

Jim Roseberry

fireberd
Jim, The USB 2.0 connector (there is only 1) on the motherboard is being used by the Corsair H100i CPU cooler. Had to add a PCIe card (and after adding the USB 2.0 port card the floppy diskette drive works perfect).

Didn't realize the USB-2 header was being used.
Lots of motherboards have two USB-2 headers.
In any event, it works... so the rest is moot.

2017/02/08 14:24:06

fireberd

This ASUS motherboard has one USB 2.0 and two USB 3.0 headers.

New Build - Bad Interface noise

Use My Existing Forum Account

Use My Social Media Account