Okay, I'm using MC5.  I'm running my guitar direct through my soundcard.  I recorded some tracks and then use "insert send assistant" and create an effect bus to add my amp sim to.  And then send my 4 guitar tracks to that bus to save on CPU power.

If I don't change my track outputs to that bus, I can hear the original recording (which is clean) mixed in underneath the effects of the amp sim.  I've used a couple different amp sims and still get the same result.

Although when I switch my track outputs to the bus with the amp sim on it, it sounds great.  But I lose all control of track panning, volume, etc.   All 4 guitar tracks are now controlled by the one bus.  I don't remember this being a problem before.

So is there another way to get rid of the background recording besides switching  my outputs.  Or am I inserting my effects bus incorrectly? 

Thanks!

This is the P5 forum, not the music creator.

But you have made a send for your guitars, so unless the sends are 100% wet the tracks will pass a percentage of the dry (uneffected) sound onto the main bus.  Make it 100% or just create a "guitar" bus and route the guitars there directly.  Put your amp sim on the insert and route it back to the main.  Either way will get you full amp sim sound.

@

  When I went back in the MC forum and saw my post wasn't there I knew I misplaced it.  Just spent 10 mins looking for It.  I obviously wasn't paying attention.

Anyway....Thanks a lot for the tip.

Thank you for information sharing, it useful to me.



___________


Dallas Cowboys Jerseys
youth cowboys jersey
Womens Cowboys Jersey