How to copy ProChannel EQ settings to another channel? Solved: Ctrl+DnD, EQ must be on

2017/03/19 16:51:07

shawker

The PC EQ must be powered on in the source and target for the ctl-drag to work.

2017/03/19 16:52:47

jpetersen

Well, I rebooted, restarted Sonar and created a fresh project.
Created 2 tracks and it works, just like you showed above.

Opened my old project, tried exactly the same thing, and it didn't work.

I created my old project this morning. And all it contains is my guitar playing.

Odd.

2017/03/19 16:54:48

scook

shawker
The PC EQ must be powered on in the source and target for the ctl-drag to work.

Pretty sure the PC and QCEQ power button states do not matter. I just tested two cases, one with the source EQ turned off and another with both source and target turned off. In both cases, the EQ copied OK.
This is wrong see later posts. The source EQ power button must be on, the source and target PC power buttons and target EQ power buttons do not matter.

2017/03/19 16:54:52

jpetersen

shawker
The PC EQ must be powered on in the source and target for the ctl-drag to work.

Aaaah! Yes! Hooray! That's it.

Aint nothin' a baker can think up that a user cannot misuse.

Many, many thanks for your patience, guys!

2017/03/19 16:57:24

scook

It should not matter. If there is a way to reproduce the failure, it should be submitted as a problem report.

2017/03/19 16:58:27

jpetersen

OK, I'll try some more combinations.
But this saved me some effort.

2017/03/19 17:02:47

paulo

scook
It should not matter. If there is a way to reproduce the failure, it should be submitted as a problem report.

Source has to be on for me - doesn't matter about the target track.

2017/03/19 17:03:10

jpetersen

Here's what I found:

The source EQ must be on.
The target EQ will be on after the drop, even if it was off initially.

The on or off state of the entire PC (source or target) has no effect and does not change.

2017/03/19 17:04:04

brundlefly

I don't think the power state of the target EQ matters, but the source EQ does need to be powered up.

2017/03/19 17:05:23

scook

paulo
scook
It should not matter. If there is a way to reproduce the failure, it should be submitted as a problem report.

Source has to be on for me - doesn't matter about the target track.

I think you are correct. I tested again and made sure source was off. The drag option is not available. I guess that makes sense but it might be worth writing up any way.

How to copy ProChannel EQ settings to another channel? Solved: Ctrl+DnD, EQ must be on

Use My Existing Forum Account

Use My Social Media Account