How to configure (setting) Cakewalk Sonar X3 and midi keyboard Korg Taktile??? 
What settings do you need to work on the Korg controllers ?? 
Need detailed instructions ....

Have you tried checking the Korg site because they may have the documentation you need?

SONAR uses ACT for control - I don't know if they have a taktile profile.  If not, you have to find a profile that most closely matches your controller - the number of knobs etc.  There is a generic one that seems to work.  After that it is going through each controller on the ACT page, making sure it is assigned to what you want it to do.
 
I suggest looking at the video tutorials to discover exactly how assigning works.  And be prepared to read the manual. 
 
If you are wanting to assign the performance pad to a soft synth, that is best done on a case by case basis.  You choose the controllee on the synth screen and then move the controller.  They will work now as one.
 

In Korg Taktile has preset setting to sonar x3! 
In Sonar x3 there is no preset ((

Has there been a resolution to this?  I have a Korg Taktile25 Triton, and while the Korg manual suggests using the Mackie Control emulation, there are three in Sonar Platinum to choose from.  I can get the MIDI note communication working with no problem, however, the transport controls are not working.  

Yo también tenía el mismo problema, anteriormente el controlador funcionaba correctamente pero en alguna actualización dejo de funcionar. Korg ha lanzado actualizaciones de sus controladores y de su Kontrol Editor. Descarga las actualizaciones  e instalalas, (hay que prestar atención ya que el driver tiene casi el mismo nombre que el anterior y puede confundirse) Una vez instalada la actualización se deberá desconectar el cable usb del midi y volverlo a conectar, no es necesario reiniciar el computador. Con esto deberá de funcionar correctamente el MIDI así como el Transport del DAW.
Espero que esto solucione su problema.
Saludos.
 
I also had the same problem, previously the MIDI worked correctly but in some update stopped working. Korg has released updates from its drivers and its Kontrol Editor. Download the update and install it (you have to pay attention since the driver has almost the same name as the previous one and can be confused) Once the update is installed you must disconnect the usb cable of the midi and reconnect it is not necessary to restart the computer . With this you must operate the MIDI as well as the DAW Transport.
I want this to solve your problem.
Best regards.

[image]file:///Z:/Im%C3%A1genes/Superficie%20de%20Control.jpg[/image]
[image]file:///Z:/Im%C3%A1genes/Dispositivos.jpg[/image]

Sorry but I can not upload the screenshots to show the settings.

1 - Preferences / MIDI / Devices / (Check all input - output device name =  Taktile).
2 - Preferences / MIDI / Control Surface / Contol - Surface = Mackie Control - 1; In Port = Taktile 25 DAW IN; Out Port = Taktile 25 DAW OUT.