OK... I got the project loaded up.
It was looking for Microsoft Wave table so I had to switch it to my Saffire....
Track 1 audio is TTS
tracks 2,3,4,5 are midi but there is nothing assigned in the channel , Bank, and patch fields.... on playback the meters move but no sound. Clicking into the CBP fields I have no options in there.... just default which gets me nowhere.
So I will make some assignments... the project appears to have at least 2 instances of TTS in it.... I've done a few things and nothing gives me sound..... so.....
I now deleted the audio track and added a new audio track...EDIT TO ADD: deleting the track was not necessary..... just one of my tests... I later deleted the entire project to remove all the things I did to get sound and reloaded it from the memory stick and proceeded as follows. I wanted to restart with your project just as it was sent.
I manually inserted TTS as a soft synth into the FX bin of track on...the new audio track.
NOW.... when I go to the Channel, Bank, and Patch fields I have options available.... So I now select the following fields:
Input is set to OMNI...and this doesn't matter
OUTPUT is set to the TTS-3 synth... the one I added. If I select either of the first two... I get no sound.
Channel is set to TTS channel 1
Bank is the first one in the list 15488 preset normal 0
Patch is PIANO 1 from the drop down
for the next track #3 I use the same output setting.... I set the channel to the NEXT higher number (2)..... select the SAME bank and then choose the PATCH that I wish track 2 to be.....
I repeat that process for tracks 4 &5
hitting playback gets me going with all the tracks playing.
I click in the midi track on CLIPS> AUTOMATION> volume default ch 1 I repeat that for all the midi tracks....
It all works fine.
I'm thinking the issue may be related to using the Wavetable synth rather than MANUALLY inserting a TTS synth in the FX bin... because while there was what appeared to be two instances of TTS in the project... selecting either by proper methods produced no sound. I don't have the wavetable synth so the difference between my DAW and yours appears to be the sound card. I had to assign the Saffire to do sound duties.
When I insert TTS into the FX bin of track one.... then click the output of a midi track.... I see as possible outputs
1-Saffire
2-Cakewalk TTS-1 1
3-Cakewalk TTS-1 2
4-Cakewalk TTS-1 3
New DRum Map >
I must choose #4 to get sound. Nothing else works..... I did not try the drum maps.
Greg pointed out that the midi tracks MUST have different midi channels and this is true.
I would recommend you try inserting TTS into the FX bin..... it will show up as yet another instance of TTS.... #3...and try reassigning the CB&P using it. Then drop in the envelopes and see if that works for you.
As far as I can see the file you sent worked fine once I added TTS in the bin and made the changes to assignment.
Let us know.