SONAR

SONAR (p.2098)
Post New Thread
Regular
TomHelvey

Vocal Align

I just got a chance to use Vocal Align. I was working on a song with pretty tight backup vocal phrasing and one part had slightly longer note durations in places. I put the region on the long one and used the short one for the guide @ around 25% and it tightened things up nicely. Pretty cool...
1
2015/02/28 23:49:17
wizard71

(SOLVED) Got Platinum...Melodyne no longer appears in region fx

See posts below about removing vst and rescanning... Tried reinstalling melodyne (i have the editor upgrade) It is still present under region fx in X3e but in platinum it is only there as a rewire device. Any ideas? (vocal sync is there )..
37
2015/02/28 23:19:30
ragioniere

BCF2000 and touch sensitive faders?

Hello guys. I just got a Behringer BCF2000 console and test it over the weekend with SONAR 3 in Mackie emulation mode and it works perfectly especially with the Virtual Screen app. My only concern is that the console has no touch sensitive faders so you have to "fight" the motors for a second bef..
11
2015/02/28 23:11:16
gswitz

We bought Platinum for Beepster!!

He's a good guy and he'd be buying it if he could. No reason to leave him salivating outside the fence. Beep now has enough$ to get Platinum and is busy buying it on the last day it's available! Thanks to all who piled on!..
119
2015/02/28 23:08:16
joden

Q re CCC and recognising installed apps...

I have just reinstalled Sonar platinum from offline files on my system. However when I go to CCC it still shows apps like Rapture and Dimension Pro (for example) as uninstalled. Is there a way to get CCC to acknowledge they are installed? Seems that it will not load updates for downloading/Installin..
4
2015/02/28 22:55:31
Ricebug

MIDI Notes Dropping Out [SOLVED]

When I import a MIDI file, some of the notes will not play in Sonar X3 Producer. The circled notes shown below are silent: http://www.bogadocious.com/temp/bassmidi.png This problems run throughout the song. It's a bass line. I thought it was out of range, so I adjusted the octave. Those notes will t..
3
2015/02/28 22:50:07
mixmkr

Let CCC completely overwrite X3e install - seems fine (w/Braintree)

Welp...the forums finally convinced me to bite the bullet and where I had only installed the tutorials and the Anderton items plus the core SPlat program from CCC originally, I let it install everything again...so all "green" lights, so to speak. I'm not concerned with filling my C/OS drive, as i..

2015/02/28 22:24:05
nostradamust

Allston, Braintree, version numbers, installations not working

I wonder if I'm missing something obvious, I cannot get Sonar Platinum to update correctly through Command Center.I've already updated "Anderton Collection", "SONAR Help and Tutorials", "Boz... ProChannel Collection", "Cakewalk Sound Center" and "NYC Showroom Collection" all of which showed yellow l..
1
2015/02/28 22:23:01
JamesDavis

Fader Automation not working- any geniuses available?

I've looked at previous similar issues. I am not in Offset Mode. When I enable Write Parameters to record the volume envelope on a single track, the envelope is created and editable. However, it acts as though the Read Parameter button is not enabled, though it clearly is. If I enable the Write Para..

2015/02/28 21:03:43
mcstringer413

Dimension Pro issue after Braintree update

Dimension Pro loads fine. I begin to play the controller, I'm hearing sound, then all of a sudden it cuts out completely and I can't get the sound to come back. So I delete DPro and then re-insert it into the project; The sound comes back and I'm playing away and after a minute or two it craps out a..
7
2015/02/28 20:55:51

<< ..2098 2099 2100 ..

© 2026 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account