Cakewalk Hardware

Cakewalk Hardware (p.16)
Post New Thread
Regular
Thenamir

SPS-66 not recognized / drivers fail to install Win 10 Dell

Moving to a new computer and upgrading to Sonar Platinum. I am trying to install the device and drivers for the venerable Sonar Power Studio SPS-66, but the installation fails at the point where it asks for the device to be plugged in. Here are the specifics.Computer: Dell XPS 8700, 12GB memoryProce..
1
2016/08/27 11:31:30
singerNow

Cakewalk V-Studio 100 and Sonar Platinum

I have a Cakewalk V-Studio 100 and everything is working in the latest Sonar Platinum. I use a 24" touch screen with Sonar and I want to "touch" the screen to select the track fader (rather than scrolling through tracks using the V-Studio 100 TRACK arrow buttons). How do I configure Sonar to use th..

2016/08/26 20:28:40
Eddy Yates

V-Studio 100 not working with Platinum

I know there are a lot of posts about this problem, and I've read them all and tried all the solutions that seemed to work with others. Still cannot get VS-100 to show up in audio pref. for Sonar Platinum. I can get it to work as a Control Surface, but not audio. Any help appreciated, just know ..
3
2016/08/26 20:17:22
sad_muso

Low latency input and PC sounds simultaneously? HELP!

Hi All, I am trying to get an audio input to work with low latency and also be able to hear the usual PC sounds. ASIO seems to be the industry standard for low latency input, but it usually means that you cannot have any other system sounds simultaneously. I'm basically trying to run my guitar throu..
3
2016/08/26 06:01:06
steelgtr

High Gain AI's?

Hardware: http://forum.cakewalk.com/fb.ashx?m=3469054..

2016/08/22 20:24:52
Scotclayton2

sonarplatinum.exe has stopped working....

SONAR: http://forum.cakewalk.com/fb.ashx?m=3466570..

2016/08/18 00:11:46
SouthernGirl

CakeWalk Home Studio 3.01

Software: http://forum.cakewalk.com/fb.ashx?m=3465114..

2016/08/16 14:07:22
yugo182

No input signal from Cakewalk UA-25 EX Interface to computer

When I attempt to record in Logic pro x there is no signal being picked up. Output settings are working perfectly but audio isn't being transmitted from my interface to my computer. The Direct monitor however does work - so the audio is being transmitted from my microphone to my interface. In my com..

2016/08/15 15:36:41
guylemec

VS-20 and Windows 10

I know there was a lot of interest in this when Windows 10 was new.The VS-20 had such good sounds. I didn't use it as an audio interface as such but as an effects processor, playing through it on a tablet where the VS-20 was installed on Windows 8.1, into Sonar Platinum on my Windows 7 x64 PC (using..
5
2016/08/12 07:59:41
THambrecht

Bye Bye VS700 Console with Windows 10

As I see on the Roland Compatibilty Site, Roland has buried the VS700 Console.Roland don't wants to make Drivers for the VS700. With a trick it is possible to install the Windows 8.1 driver on windows 10. But with me that trick works only with "Mackie" protocol - and not with the "Cakewalk Generic S..
23
2016/08/07 17:34:03

<< ..16 17 18 ..

© 2024 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account