Cakewalk Hardware

Cakewalk Hardware (p.35)
Post New Thread
Regular
bnova

VS700R No Longer Available ??

Hi All I have had a VS-700R on order since Feb 16th. The delivery date kept getting pushed out so I contacted Roland direct and here is the response. Can't exactly tell from the message if the product is being discontinued or not? Anyone else tried to order one recently? Oh well, this is not a good ..
52
2015/03/06 10:01:24
LadyFuzztail

Need help setting up a mic with Roland SD-50

So i recently got a set of MXL 990/991 cardioid condenser mics, and they take 48 volts of phantom power. I planned on using it with my Roland SD-50's XLR3 phantom power input, but I am not getting any sound through my Mic that way. Here's what i did :Plugged the mic to the Roland SD-50 to the Mic-In..

2015/03/04 07:50:47
Wildman

Inputs to the Edirol / Roland UA-101

I have been recording for quite some time using the UA-101. My signal path for my mic was into a Focusrite Platinum VoiceMaster which then went into a Phonic MM1805X Mixer and then into the UA-101. I am trying to streamline my set up and want to get rid of the mix. (Originally I used this so I could..
2
2015/02/28 00:26:10
g_randybrown

Hard drive advice

Computers: http://forum.cakewalk.com/fb.ashx?m=3180884..

2015/02/25 12:18:22
john.childs@btinternet.com

UR-80

Does anyone know if the Edirol UR-80 will work with Sonar Platinum - Windows 8?..
1
2015/02/22 11:43:27
peavey_xxx_treme

VS700SET V-Xpanded with a studio capture..

I recently purchased a Roland studio capture, and was using it flawlessly with an old peavey studio mix controller.. I then acquired a VS700C, and was running the Studio-Capture for I/O and the VS700C driver with the unit in standalone mode.. This too worked flawlessly.. Not even a week later I came..
8
2015/02/21 06:53:00
francoml

Sonar Platinum supports VS-100 surface controls? [Solved thru Hacking]

SOLVED: Copy all VS-xxx from Registry from the Sonar X3 Install (for me was an antique computer with Sonar X3 64Bits installed) and VS-XXX.DLL from Program Files/Cakewalk/Shared Surfaces/ to the fresh install on a new computer. Loading all registry entries and copying the DLL will work like a charm...
14
2015/02/09 10:18:56
gray36

Advice on UA-4FX, please.

$99.00 on sale, I have been using UA-1G for awhile, and it has done its job wonderfully. I have only been recording guitar so far, but I am wanting to finally learn how to use my Akai MPK 25, and eventually add vocals. I do not need anything mind-blowing, as I am only playing for my own enjoyment. A..
5
2015/02/08 01:34:26
Westside Steve Simmons

V 700 and Windows 10

anybody hip to Windows 10? I haven't looked into it much but do suppose Roland will write drivers for the 700 series? Or if it will need new drivers? WSS..

2015/02/04 07:05:32
newdreamstudio

sonar platinum support for VS-700c ??

anyone know if SONAR Platinum has functional support for the Roland VS-700C ? Rusty..
11
2015/02/03 20:44:26

<< ..34 35 36 ..

© 2025 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account