Hardware

Hardware (p.103)
Post New Thread
Regular
HighAndDry

Motu AVB series question

Does this series of interfaces require that you get audio in and out of the computer via cat5e cable? Or??? i am a bit confused about that. It says usb and thunderbolt as well so I guess I just don't get the whole ethernet thing. forgive my ignorance..
7
2016/07/21 18:20:16
MrGarrison

How to control Midi Automation (CC#11, CC#5 etc...) with Hardware Controller

Hi everyoneI would like to purchase a simple hardware controller to be able to control the writing of Midi Track Automation in real time, however, all I seem to be able to find on the forums (here and elsewhere) are references to controlling Volume, Pan and other VSTs......for some reason midi track..

2016/07/20 15:52:13
magian

Right channel output from Sonar is very low. Input coming from Scarlett 2i2 appears low.

I am running Windows 10 64-bit with Sonar Platinum. I have a single audio track fed from an instrument input on the Focusrite Scarlett 2i2 second generation. The output is fed to a set of TASCAM VL-S3 powered monitors, though I think this is irrelevant. The output from the right monitor is very low,..
2
2016/07/20 12:06:30
cballreich

Drum triggers for acoustic (real) drums?

"Yes dear, your kit is extremely "punk" but it sounds like crap on the recording." Does anyone have any guidance regarding triggers that can be placed on normal drums to create a midi "backup" of a drum performance? Some of the kits I'm trying to record are pretty awful. I'm already using Drum Repla..
3
2016/07/19 19:20:25
jimfogle

TASCAM US-122 USB Interface with Win 7 ?

I purchased a used TASCAM US-122 USB interface then found out TASCAM's website has drivers for 32 & 64 bit XP and Vista operating systems but no drivers for Windows 7, 8, 8.1 or 10. Is anyone using a TASCAM US-122 interface with 64 bit Windows 7? If so what steps did you take to get it to work p..
7
2016/07/19 14:42:51
Johnbee58

Question On Interfaces

Hi! I used to use a Pod Studio UX2 for my interface. A few months ago, I switched to a Focusrite Scarlett 6i6. I don't know why I switched to the Focusrite. I guess I thought for some reason it would be better than the UX2. It's not really better, but worse in at least one way-Using it with an elect..
6
2016/07/17 14:51:08
Siluroo

Need midi controller advice

I am wanting to purchase a midi controller to use with Sonar Platinum, and associated sware such as VST's, space is a priority, so prefer to get something like a 49 key range, have been looking at the roland a500, akai advance 49 and the NI Komplete, I am turned off the komplete because it does not ..
5
2016/07/15 22:17:13
HighAndDry

Motu 828 vs 823 or ultralite

I am finally going to bite the bullet and buy a usb interface. I have shied away from them because they suckedwhen they first came out. I have always used pci or firewire. I have seen Motu praised on this forum a lot and haveowned a motu firewire before. I thought it was good quality. I am looking a..
11
2016/07/15 20:59:38
fireberd

Murphy's Law Strikes again with an ISA One Preamp

I haven't had much luck lately with new equipment (see some of my other posts/rants).I ordered a new Focusrite ISA One Preamp and it came in late Thursday. Friday morning I was checking it out. I used a mic cable with a Neutrik connector that I've been using in my studio for a couple of years to con..
7
2016/07/15 06:27:33
SuperG

Just got an SSD for the first time... Wow!

I had a 10%-off coupon from NewEgg, they had a PNY 960Gb on sale for $206, I went for it. Total 186.99.It came with a free DL of Acronis TrueImage. I popped the new SSD in the PC, cloned the old drive to it, set the Bios to boot off of it. Wow, just wow! I'm going to have to get one for my laptop.....
1
2016/07/14 09:51:18

<< ..103 104 105 ..

© 2025 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account