Hardware

Hardware (p.161)
Post New Thread
Regular
Doktor Avalanche

New BETA driver Saffire Pro users

This beta has been out for a month now...http://beta.focusrite.com/ If you install it please remember to remove the Windows legacy firewire driver if you are running it (no longer recommended by Focusrite). You also need to reboot even though it does not prompt for it (in my case it did not install ..
16
2015/06/02 14:55:29
dcumpian

How do YOU handle VST's with articulations outside the range of your keyboard?

I have a Triton 76 key keyboard that I use as primarily as a Midi controller. I'm finding lots of newer VSTi's, particularly orchestral and virtual drums (like BFD3) that have either notes or articulation keyswitches below or above the range of the Triton. It used to be a minor thing, but it is beco..
8
2015/06/02 08:18:50
maximumpower

Headphone recommendations?

I am an amateur hobbyist that had only one set of headphones for tracking and mixing. It *was* a pair of AKG K 44s but one side quit working. I did some troubleshooting to make sure it was the headphones and not the audio interface. The AKG K 44 are not available anymore and the replacement seems to..
19
2015/05/31 17:42:34
gswitz

Audient ASP880 appears to not have a low-pass filter before the ADC

https://www.youtube.com/watch?v=qdfWWg1FOyQ I noticed that there is tons of noise at the highest available frequences using my Audient. Is this normal? It seemed to be a totally cheap approach to hardware design. I thought all ADCs would apply a low-pass before conversion. To skip it seems really ch..
1
2015/05/31 07:48:40
pentimentosound

iConnect Midi and Audio +4 will change the one ASIO device limit soon, (maybe)

In the June 2015 issue of Recording, on page 48, there is a short article on the iConnect Midi +4 and they mention the iConnect Audio +4 is just being released. These allow midi and audio to be freely exchanged between multiple computers-PC-MAC-iOS. This means the end of the one ASIO device limit, u..
7
2015/05/29 08:49:44
inaheartbeat

Integrating MOTU 828 MKII and Roland Octa-Capture together with X1c

My MOTU 828 MKII is set at 96Khz and is serving as a clock master to my Octa-Capture also set at 96 Khz. They are connected via SPDIF and they seem to play well together. The MOTU is on a firewire interface directly connected to my computer (specs below) and the Octa-Capture is connected to the same..
12
2015/05/28 12:13:33
danbottomburp

Have i got this right ?

I want to connect my guitar to SONAR and take advantage of all the amps and effects . Am i right in thinking all i need to do is connect my guitar to my audio interface input . And then my guitar amp to the Output of the audio interface ? Then create a new audio track - add the amp/effect and enable..
2
2015/05/26 04:18:51
bitflipper

[Solved] Seeking Recommendations for a Drum Machine

After 20 years since the last one I had, I've decided to get another standalone drum machine for jam sessions and occasional live performance. In addition to standard kit instruments I'd also like a selection of percussion instruments, e.g. congas, shakers & tambourine. Since it's mostly for imp..
41
2015/05/25 12:08:15
skitch_84

Audio Technica ATH-M70X

I absolutely love my ATH-M50 headphones, but I was able to take a quick listen through the new ATH-M70X. They sounded fantastic. Really clear sound with their ability to separate the instruments spatially in the mix something I noticed immediately. They also sounded much flatter with less of the dee..
7
2015/05/21 09:09:41
kristoffer

FW-1884 and Win8 - legacy

I've been using the FW1884 (Tascam) for a few years and it has worked flawlessly. I decided to try to upgrade from Win7 to Win8 (both 64bit) and it has been working almost flawlessly as well - but a few times it does not "sync" the firewire. I have not been able to use the "legacy" FW driver, as it ..
42
2015/05/21 00:11:11

<< ..160 161 162 ..

© 2025 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account