Hardware

Hardware (p.48)
Post New Thread
Regular
Ham N Egz

CALLING ALL Mackie MCU + Expander Owners I have a question on a config!!

I have an MCU pro and just recently purchased the expander. Running Platinum, naturally. I would LIKE to configure the expander to control the AUX busses(my sub mixes) while the MCU controls tracks.I have yet to find the config to do this from the platinum menus.Whatever the MCUs control group is se..
6
2017/07/24 15:48:40
soens

Best Place To Sell Music Gear?

Up till now I've always sold thru eBay. But after getting stiffed by a buyer claiming an item was defective when it wasn't (it was returned in working condition but slightly damaged and I'm out shipping for both ways and selling fees), I researched eBay and found a lot of sellers are getting stiffed..
18
2017/07/22 15:59:48
Mosvalve

Power Attenuators for amplifiers

Most of the time It's hard to get the sound I'm after because I have to have the amp too loud. Even though being loud is no problem I rather play at a decent ear saving level. I've been looking at power attenuators and could use any useful info about them. Are any of you using one? There are so many..
16
2017/07/22 13:40:16
NickB

Mackie Control - anyone upgraded firmware?

I tried to upgrade my Mackie Control to the latest firmware: 2.1.1 firmware upgrade: http://www.mackie.com/products/mackiecontrol/upgrade_mcu.html but it didn't work. Has anyone done this succesfully? Nick..
15
2017/07/22 01:43:12
dwhitejazz

PreSonus Firepods Suddenly Not Recognized By Windows 7

I know PreSonus Firepods are not supported for Windows 7 64 bit, but my units had been working fine until this morning. Now the devices are not recognized by Windows 7. In Device Manager, all I see is Error Code 10. I've tried uninstalling and reinstalling the drivers, and tweaking the upper/lower f..
4
2017/07/22 01:37:36
benrecordingmusic

Question about latency - USB vs. PCI - in sonar

I have an old M-audio delta 1010 and run it at 1.5ms latency (24/44k) ... I maybe doing a mobile rig with laptop and wonder if there is any USB sound cards that run that fast. I dont need 10 in and outs...more like 4 at best - cause Im just playing live thru it. however, I can tell a difference in t..
12
2017/07/21 01:07:53
musicroom

RME Drivers Updated

For those of you that haven't checked - RME has updated drivers on their site...
6
2017/07/20 19:28:59
Adji

Interface with more Outs than Ins

Hey all, I'm doing more mixing and less actual recording. I'm usually only recording guitars now so I only need two to four inputs on my interface. However, what I do need is more analogue outputs. I've used a Tascam US1641 for the longest time (probably 10 years?) and it has served its purpose we..
3
2017/07/19 21:52:39
danbottomburp

I will explain the best i can ,i hope someone understands :)

So i have a Presonus audiobox usb connected with an adapter so i can use my speakers as outputs,they are not proper monitor speakers but they are really good audio speakers and work really well for playback.I have just bought a new electric guitar and want to be able to use that obviously, can i use..
11
2017/07/18 23:08:40
dwhitejazz

Computer Requirements for 32 Tracks of Audio and Individual Plugins

I'm now looking at updating my studio with new Thunderbolt audio interfaces and a new computer. I've started doing mixes with 32 audio tracks and ran into digital crackling issues with my old computer system. The crackling could be eliminated if I started removing the number of Sonitus Reverb plugin..
4
2017/07/18 15:14:45

<< ..46 47 48 ..

© 2024 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account