MCU in X2 (even in 8.5)

I'm having a hard times with MCU, ev'ry time I open a project it's like dead... I have to go in control surfaces, remove it, and add it new in order to make it work
Is there any way to fix this thing,
any wizzz out there with a solution ... it's very annoying
Not that it can't be bypass, just stopping my inspiration and workflow...
 
Thanks
 
Rick
 
 
My current rigs: Dell Studio Intel core 2 Quad Q8200 2.33GHz 8g ram Win7 64 bits, 3 internal 500gb HDD + ext. 1tb, Sonar 8.5.3 & X2 Producer, Fast track U8R, PCR500, Akai MPD8, Yamaha Mo8, Mackie big knob, Alesis M1 Mk2, lots of guits and mics, and other stuffs

I take it the mcu in always on the same usb port? IE not being unplug when not in use!!!!!

make sure you have the mcu powered up before you start sonar,

After that you should be sorted

BTW, you should NEVER have to remove it, just reset its midi port in and out settings in sonar.


To expand on what fitzj has said, each new project will require ypu to setup the MCU, unless you create a template with it all sorted and always use it as your starting point (wise choice, even without an MCU)

Just remember
MCU ON FIRST THEN SONAR

Hope this helps

Thanks Guys for suggesting...
 
Fitzj     the ports are most of the times off, even in an older project with the MCU already configure, sometimes the ports are (on) in the listing but nothing happen, the MCu won't respond, I use to have a Fader port and never had any problem making it work in Xp and Win7 with the right driver
and the tweek in the registry.
 
Freex   the MCU has it's own usb port directly in the PC in the back, not on a powered hub...or the front ports
even if I reset the ports, it won't react !!!
I have 3 basic templates that I created with the MCU configure in it, and even there, on the first session, everything is alright, it works fine ... save and close the project, next day I reopen...no more MCU ... the ports are in the listing, but no response form the unit ... very strange...
I always open the MCU before Sonar
 
mmarton   I'll be upgrading the PC next month a new i7 3930K with P9X79 with 32 Gb ram, I will see then with win7 pro and a fresh X2, maybe...
we cross our fingers...
 
Thanks again, guys, anything else that comes up, feel free to feed it...
 
 
 
 
           

Sound like you're doing everything right,

So you're saying that when you load sonar, and go into midi devices in Preferences, the MCU 1-4 usb ports are there?
That in control surfaces your MCU is showing and also connected to the port MCU 1?
But that sometmes it works and sometimes it doesn't?
Is that correct?

Do you power up the mcu before or after the PC? I'm just throwing ideas at you here.