igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Melodyne Conumdrum
Hi I thought I would have a go at Meodyne as i never used it before In Sonar Pro. Now I have Platinum and I made a Authorization mistake with the serial I had In Platinum. I put it In the upgrade box on the Melodyne site Instead of the serial box.Must have been click happy. All went wrong after that and I had to get another serial from Celemony. I have had to uninstall the Sonar Melodyne Essentials and down load another from them and enter a new serial . I have done all of that and I can get Melodyne on my destop open but do not Know how to re-Integrate melodyne with Sonar Platinum. The other thing Is now I have a later version of Melodyne Essentials, Woooo! I have pointed Sonar to The Celemony folder which Melodyne Is In and re scanned ,but It Is not Integrated into the region efx. Any Ideas would be helpful. All the best John 
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 10:43:30
(permalink)
Hi. Did you install Melodyne as Vst3? That is what is needed for Region Fx (IIRC).
All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
dwardzala
Max Output Level: -61 dBFS
- Total Posts : 1470
- Joined: 2008/05/26 19:18:33
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 12:13:39
(permalink)
Also make sure you do a VST scan of the melodyn .dll location.
DaveMain Studio- Core i5 @2.67GHz, 16Gb Ram, (2) 500Gb HDs, (1) 360 Gb HD MotU Ultralite AVB, Axiom 49 Midi Controller, Akai MPD18 Midi Controller Win10 x64 Home Sonar 2017.06 Platinum (and X3e, X2c, X1d) Mobile Studio - Sager NP8677 (i7-6700HQ @2.67MHz, 16G Ram, 250G SSD, 1T HD) M-Box Mini v. 2 Win 10 x64 Home Sonar 2016.10 Platinum Check out my original music: https://soundcloud.com/d-wardzala/sets/d-wardzala-original-music
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 14:41:51
(permalink)
Hi Ken
I have got you there,thanks.
Well Dave I have gone to celemony folder and then Melodyne.
Inside there Is a dll Melodyne rewire only.Is that the dll for integrating ???
I looked in Cakewalk and vst folders ,but no sign of just a Melodyne 64 bit dll.
I have re-scanned a few times now and no luck.
The Standalone works perfectly.
All the best
John
|
dwardzala
Max Output Level: -61 dBFS
- Total Posts : 1470
- Joined: 2008/05/26 19:18:33
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 14:56:15
(permalink)
Not sure, but you can add that path to your vst scan and then rescan and see what happens.
DaveMain Studio- Core i5 @2.67GHz, 16Gb Ram, (2) 500Gb HDs, (1) 360 Gb HD MotU Ultralite AVB, Axiom 49 Midi Controller, Akai MPD18 Midi Controller Win10 x64 Home Sonar 2017.06 Platinum (and X3e, X2c, X1d) Mobile Studio - Sager NP8677 (i7-6700HQ @2.67MHz, 16G Ram, 250G SSD, 1T HD) M-Box Mini v. 2 Win 10 x64 Home Sonar 2016.10 Platinum Check out my original music: https://soundcloud.com/d-wardzala/sets/d-wardzala-original-music
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 15:19:36
(permalink)
The Vst3 install defaults to C:\Program Files\Common Files\VST3\Celemony\Melodyne.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 15:23:46
(permalink)
the vst 3 is in C:\Program Files\Common Files\VST3\Celemony
I would also rescan if your set to manual scan.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 17:59:03
(permalink)
Hi chuck I only have Melodyne Essentials and when I point to the folder In the common files I get this ilock thing and reboot. After that It Is In the rewire section ,not the region fx. I am only starting to look at this and it Is baffling at the moment. To be In the rewire section,Is that right for this Essentials version? It opens in Platinum on a separate track and can only be played within Itself by choosing my focusrite unit. All silent with re-wire. I do not know what rewire is ,but guess It is using outside programs from looking at It. How It all Integrates is stumping me at the moment. I had to go back to Celemony to get another serial and another download as Platinum refuses the serial number for some reason.This melodyne is a little different to vsts and effects ,so i am not up to speed with this program. It will probably click In my brain at some point I hope. That is if there is any hope for me!!!!!  All the best john
post edited by igiwigi - 2016/08/23 18:29:46
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 2010/12/12 20:11:50
- Location: Ontario
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 18:25:49
(permalink)
When you scan your VST's make sure you are hitting the reset button in the plug in manager before you do a rescan. That seems to make a difference when new plugs aren't showing up.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Melodyne Conumdrum
2016/08/23 18:34:28
(permalink)
igiwigi
How It all Integrates is stumping me at the moment. john, I find the best way to use melodyne is to: 1- highlight an audio clip (click + drag) 2- right click on that highlighted section of the audio clip 3- choose Region FX >Melodyne. the Melodyne interface will open in the multi dock. is this what you have done ?
post edited by chuckebaby - 2016/08/23 18:57:54
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Melodyne Conumdrum
2016/08/24 04:35:20
(permalink)
HI Chuck and All
As I said ,I messed up with serial to authorize and Celemony wrote back to me and said uninstall the one I have and reinstall a new one and a new serial and It worked.Fully authorized.
Now I have pointed to the Common files and Melodyne.
Done a rescan and It does not show up In the region fX after dragging in wave file and right clicking on It. Just vocal and drum replacer.
It shows up as rewire In the Insert column.
I cn only point to c/program files /commom/ Celemony/Melodyne.
Inside Is a Ilok thing a rewire dll and a core dll.
Every time I scan It goes In the rewire section. Is that right for the Essential version???
That Is all I can do
All the best
John
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Melodyne Conumdrum
2016/08/24 14:33:53
(permalink)
Ok Then which section should Melodyne be in Rewire or region fx. Also how do I get It In the right hole??? All the best John 
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 2010/12/12 20:11:50
- Location: Ontario
- Status: offline
Re: Melodyne Conumdrum
2016/08/24 14:39:21
(permalink)
My Melodyne folder contains 3 other folders.
Bundles
iLock Support
Shared
The Melodyne Core DLL is in Bundles and the Melodyne Assistant or Editor is in the iLock support folder. There are no DLL files in the Melodyne folder.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
John Joseph [Cakewalk]
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2015/02/18 16:37:35
- Status: offline
Re: Melodyne Conumdrum
2016/08/24 14:44:05
(permalink)
Just as a sanity check, do your platforms match up? Meaning did you install 64 bit Melodyne for 64 bit Sonar?
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Melodyne Conumdrum
2016/08/24 15:57:22
(permalink)
Hi John and John
yes I have loaded 64bit In 64 bit sonar
As the other John said there Is everything he said In my folder
Common files/ bundles ilok suport and shared.
So I have uninstalled and reinstalled now.
Where should the Melodyne program show up?????
It keeps showing up In the Insert /rewire section. Is that right??
All the best
John
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Melodyne Conumdrum
2016/08/25 06:01:06
(permalink)
Hi
I have tried uninstalling and Installing ,but always lands up as rewire device.
IS THIS THE CORRECT WAY FOR IT TO SHOW UP?? It will not show up In region fx department.
I may as well use this basic Essentials as a standalone and just manipulate wave files as I am not getting a clear message how to integrate melodyne essentials Into Sonar Platinum.
Also I see that a lot of people are getting problems with this application from what I have read.
All the best
John
|
Roo Stercogburn
Max Output Level: -88 dBFS
- Total Posts : 112
- Joined: 2013/07/08 05:27:45
- Status: offline
Re: Melodyne Conumdrum
2016/08/25 06:04:35
(permalink)
I'd suggest getting in touch with Celemony support. They will probably create a new personalised installation for you which you can then install and fix the integration issues.
|