Midi Input/Output issues with Hotfix 246.

Author
Post
Essentials Only Full Version
bysbox1
Max Output Level: -89 dBFS
  • Total Posts : 53
  • Joined: 2006/06/03 11:42:51
  • Status: offline
2011/05/17 04:06:45 (permalink)

Midi Input/Output issues with Hotfix 246.

Has anyone experienced Midi Input/Output issues with Hotfix Build 246?  If you do not select ALL of your midi interfaces, then Sonar will not allow you to choose a Midi Input Device.  Your only choise is to use All Midi Inputs, which is not good if you are doing complex routing.
 
Also when you enable Midi Output on a VSTi synth, you can not select that Synth as a Midi input on anther track.  So it's impossible to use a VST arpeggiator such as Catanya or Kirnu arp.  As a workaround you could set the midi channel in Omni as well as within Kirnu Arp or Catanya, but I found that sometimes the Midi Ouput on the VST enabled synth does not work at all.
 
If you go back to X1 hotfix 244, the issue goes away.  I noticed that there were a lot of midi fixes in hotfix 245, so I would bet it was broke when those fixes were put in place.
 
Has anyone else experienced these problems?

Byron Thomas X-1/Velocity/Curve Recordings
Altitude Studios
www.altitudegrooves.com

2 Computers, 2 Intel Core2Quads, 8 UAD Cards . . . What more can one ask for?
#1

4 Replies Related Threads
    codamedia
    Max Output Level: -67 dBFS
    • Total Posts : 1185
    • Joined: 2005/01/24 09:58:10
    • Location: Winnipeg Canada
    • Status: offline
    Re:Midi Input/Output issues with Hotfix 246. 2011/05/17 07:37:01 (permalink)
    I believe there is a full thread about this already. There might be a solution, or a confirmation for you somewhere in there.

    Check it out here.
    http://forum.cakewalk.com/tm.aspx?m=2289293

    Don't fix it in the mix ... Fix it in the take! 
     
    Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video
    Laptop: Windows 7 Pro, i5, 8 Gig Ram
    Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
    #2
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re:Midi Input/Output issues with Hotfix 246. 2011/05/17 10:59:50 (permalink)
    Here's that other thread:

    http://forum.cakewalk.com/tm.aspx?&m=2289293

    The problem is pretty well confirmed. Temporary solution is to back out build 246 where the problem apparently showed up.
    #3
    bysbox1
    Max Output Level: -89 dBFS
    • Total Posts : 53
    • Joined: 2006/06/03 11:42:51
    • Status: offline
    Re:Midi Input/Output issues with Hotfix 246. 2011/05/17 12:08:35 (permalink)
    Got it.  for some reason I could not find this via Search.  Oh well. 

    I put in a problem report for it and Cakewalk is aware of it as well.

    Byron Thomas X-1/Velocity/Curve Recordings
    Altitude Studios
    www.altitudegrooves.com

    2 Computers, 2 Intel Core2Quads, 8 UAD Cards . . . What more can one ask for?
    #4
    sunvar
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2010/12/28 09:18:42
    • Status: offline
    Midi Input/Output issues 2011/05/29 16:33:51 (permalink)
    My Configuration
     
    Toshiba Qosmio / Windows 7
    Sound Cards : Edirol Fa101 Fire Wire
    Sonar X1
    Controls : Edirol PC-50
     
    This is related to assigning the midi output. When i use VST plugins , i can assign the input and output for the midi track . It works perfectly fine.
    I have Roland V-kit which has got midi out and my Sound card has got midi in and midi out. when i select midi in as Edirol Midi in  i was able to record the beats from Roland V-Kit , the problem is when i try to assign output , i couldnt get "master" as my out put.
     
    Can anybody help me 
     
     
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1