cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
New High End Interface from Tascam
The UH-7000 2 Input High End interface from Tascam coming...haven't heard anything about it yet other then the trailer. 
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: New High End Interface from Tascam
2014/02/16 12:26:30
(permalink)
Neglected to mention...$599.00 MSRP
|
SuperG
Max Output Level: -63 dBFS
- Total Posts : 1371
- Joined: 2012/10/19 16:09:18
- Location: Edgewood, NM
- Status: offline
Re: New High End Interface from Tascam
2014/02/16 13:15:02
(permalink)
Neglected to mention...$599.00 MSRP Nice - Tascam puts out a whole range of products, but even their higher end stuff is reasonably priced - something that can't be said for a lot of manufacturers.
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: New High End Interface from Tascam
2014/02/16 13:38:55
(permalink)
I was very happy with my TASCAM FW-1884 as an interface and control surface.
Then I added my RME UFX and the recording chain was improved considerably.
Now the only downside is the unit is no longer supported so I believe I'm stuck on WIN 7 (which ain't a bad thing, IMO) with this as my control surface unless the drivers"happen" to work on Win 8.
|
pathos
Max Output Level: -84 dBFS
- Total Posts : 331
- Joined: 2010/12/08 20:22:37
- Status: offline
Re: New High End Interface from Tascam
2014/02/16 14:26:37
(permalink)
bapu
I was very happy with my TASCAM FW-1884 as an interface and control surface.
Then I added my RME UFX and the recording chain was improved considerably.
Now the only downside is the unit is no longer supported so I believe I'm stuck on WIN 7 (which ain't a bad thing, IMO) with this as my control surface unless the drivers"happen" to work on Win 8.
OT there's a new RME update- Windows PnP driver for Fireface UFX, UCX, UC and Babyface, version 1.042.
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: New High End Interface from Tascam
2014/02/16 21:51:43
(permalink)
I can say I've been incredibly happy with my Forte.
I always did like Tascam products. They were the orginal Home Studio go to thing a ma bob...for me..LOL
I had a ton of their stuff...and it never disappointed...do have to say that...
|
kristoffer
Max Output Level: -82 dBFS
- Total Posts : 406
- Joined: 2010/08/18 15:25:37
- Location: Bergen, Norway
- Status: offline
Re: New High End Interface from Tascam
2014/02/17 04:15:56
(permalink)
pathos
bapu
I was very happy with my TASCAM FW-1884 as an interface and control surface.
Then I added my RME UFX and the recording chain was improved considerably.
Now the only downside is the unit is no longer supported so I believe I'm stuck on WIN 7 (which ain't a bad thing, IMO) with this as my control surface unless the drivers"happen" to work on Win 8.
OT there's a new RME update-
Windows PnP driver for Fireface UFX, UCX, UC and Babyface, version 1.042.
I think he's referring to the Tascam FW1884 unit, which was discontinued in 2010. And therefore does not have any official drivers for Win8
SonarPlatinum/X3e ProducerHW:
~Pod HD pro~Pod X3~JTV-69 US~Tascam FW1884~BEYERDYNAMIC DT770 PRO~Røde NTK~MaschineMikro~ADAM ARTist5
W10 - i7 920 - Intel DX58SO2 - Nvidia NVS450 Quad - 12GB OCZ Gold 1600Mhz RAM - Noctua NH-D14 - Corsair TX950w PSU
- Corsair MX200 500GB OS/Programs - OCZ Agility 3 SSD (Audio) - WD Black 1TB
|
AT
Max Output Level: 0 dBFS
- Total Posts : 10654
- Joined: 2004/01/09 10:42:46
- Location: TeXaS
- Status: offline
Re: New High End Interface from Tascam
2014/02/17 09:59:17
(permalink)
$600 seems to be the new entry fee for high quality interfaces - Forte, Audient, Babyface, Avid. I guess the generation that bought $200 interfaces is now ready to step up - or the manufacturers hope so. I'm wondering how much better they can be? The mid-line stuff that is coming out like preamps put a premium on transformers as well as better components - but transformers are the expensive bits. Still, I suppose the $600 is better, even if they don't include transformers like a Burl, etc.
I'm glad I'm happy w/ my TC, otherwise I'd be tempted ...
https://soundcloud.com/a-pleasure-dome
http://www.bnoir-film.com/ there came forth little children out of the city, and mocked him, and said unto him, Go up, thou bald head; go up, thou bald head. 24 And he turned back, and looked on them, and cursed them in the name of the Lord. And there came forth two she bears out of the wood, and tare forty and two children of them.
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: New High End Interface from Tascam
2014/02/17 11:18:01
(permalink)
kristoffer
pathos
bapu
I was very happy with my TASCAM FW-1884 as an interface and control surface.
Then I added my RME UFX and the recording chain was improved considerably.
Now the only downside is the unit is no longer supported so I believe I'm stuck on WIN 7 (which ain't a bad thing, IMO) with this as my control surface unless the drivers"happen" to work on Win 8.
OT there's a new RME update-
Windows PnP driver for Fireface UFX, UCX, UC and Babyface, version 1.042.
I think he's referring to the Tascam FW1884 unit, which was discontinued in 2010.
And therefore does not have any official drivers for Win8
Correct
|
kristoffer
Max Output Level: -82 dBFS
- Total Posts : 406
- Joined: 2010/08/18 15:25:37
- Location: Bergen, Norway
- Status: offline
Re: New High End Interface from Tascam
2014/02/18 04:06:05
(permalink)
bapu
kristoffer
pathos
bapu
I was very happy with my TASCAM FW-1884 as an interface and control surface.
Then I added my RME UFX and the recording chain was improved considerably.
Now the only downside is the unit is no longer supported so I believe I'm stuck on WIN 7 (which ain't a bad thing, IMO) with this as my control surface unless the drivers"happen" to work on Win 8.
OT there's a new RME update-
Windows PnP driver for Fireface UFX, UCX, UC and Babyface, version 1.042.
I think he's referring to the Tascam FW1884 unit, which was discontinued in 2010.
And therefore does not have any official drivers for Win8
Correct
Another OT, but FYI: I'm using FW1884 with great stability on Win 8.1. And the X3 trial. It has been so stable and not missed a single note the last 11 days (it have been powered on for 11 days...) so I'm actually buying X3 now as soon as I find a good deal :)
SonarPlatinum/X3e ProducerHW:
~Pod HD pro~Pod X3~JTV-69 US~Tascam FW1884~BEYERDYNAMIC DT770 PRO~Røde NTK~MaschineMikro~ADAM ARTist5
W10 - i7 920 - Intel DX58SO2 - Nvidia NVS450 Quad - 12GB OCZ Gold 1600Mhz RAM - Noctua NH-D14 - Corsair TX950w PSU
- Corsair MX200 500GB OS/Programs - OCZ Agility 3 SSD (Audio) - WD Black 1TB
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: New High End Interface from Tascam
2014/02/18 07:47:27
(permalink)
kristoffer
bapu
kristoffer
pathos
bapu
I was very happy with my TASCAM FW-1884 as an interface and control surface.
Then I added my RME UFX and the recording chain was improved considerably.
Now the only downside is the unit is no longer supported so I believe I'm stuck on WIN 7 (which ain't a bad thing, IMO) with this as my control surface unless the drivers"happen" to work on Win 8.
OT there's a new RME update-
Windows PnP driver for Fireface UFX, UCX, UC and Babyface, version 1.042.
I think he's referring to the Tascam FW1884 unit, which was discontinued in 2010.
And therefore does not have any official drivers for Win8
Correct
Another OT, but FYI: I'm using FW1884 with great stability on Win 8.1. And the X3 trial.
It has been so stable and not missed a single note the last 11 days (it have been powered on for 11 days...) so I'm actually buying X3 now as soon as I find a good deal :)
Producer is currently $425.15 at JRRShop with code NEWSLETTER15. http://www.jrrshop.com/cakewalk-sonar-x3-producer
Add to cart and use coupon code for price. This code could be used for upgrades if you're going that route also... Also, Guitar Center currently has 15% off any item $299 or more, which could be used for upgrades if your going that route. Just go to the site and get the coupon code. Cheers!
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re: New High End Interface from Tascam
2014/02/18 07:52:01
(permalink)
I wonder if this thing is Made In Japan at a genuine Tascam factory or if it is Made In Elsewhere at a contract factory? The genuine factory stuff always seems to be worth a premium price.
|