IfItMovesFunkIt
Max Output Level: -90 dBFS
- Total Posts : 38
- Joined: 2014/11/25 13:24:17
- Status: offline
New P.C. for DAW usage Question 1
I thought my P.C.had died at the weekend but thankfully I was mistaken but the whole affair got me thinking about getting a new machine but as ever this has left me with more questions than answers.
I'm a 58 year old 'Bedroom' musician that uses a DAW to record songs that I've written and that's as far as it goes and therefore you can see that my needs are 'very modest'.
In the past I have just bought a reasonabley spec'd PC and added a sound card with ASIO drivers and it has worked fine for me however I dont know if that's the best way to go.
So my first question is 'Do I use an off the shelf P.C.or should I be looking to create something on a more AD-Hoc Basis
|
kzmaier
Max Output Level: -81 dBFS
- Total Posts : 461
- Joined: 2010/10/18 08:20:01
- Location: Rochester, NY
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/16 16:18:22
(permalink)
You should get by with a reasonably spec'd PC. Mine was off the shelf. You want a fast drive 7200rpm or SSD and 8G mem in my opinion. Add a decent sound card and you'll be off and running.
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/16 16:19:14
(permalink)
Hi. I would say that you would be ok with an off the shelf pc. Be sure that it is enough "up to date", so if you decide to venture into some heavy vsti' s, you will have the horsepower. Get at least 8Gb of RAM.
Best of luck.
Ps. For a better experience I would suggest getting a dedicated Audio Interface with proper ASIO drivers, if you do not have that already.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Jim Roseberry
Max Output Level: 0 dBFS
- Total Posts : 9871
- Joined: 2004/03/23 11:34:51
- Location: Ohio
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/16 18:29:51
(permalink)
If you're tech savvy, you can build a better custom DAW than any off-the-shelf machine.
You can hand select each component for silence and speed... and the (quality motherboard) BIOS will have all parameters necessary to achieve super low/consistent DPC Latency (which is paramount when running heavy loads at the smallest ASIO buffer sizes).
|
IfItMovesFunkIt
Max Output Level: -90 dBFS
- Total Posts : 38
- Joined: 2014/11/25 13:24:17
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/18 15:29:00
(permalink)
Thanks for your input guys . . . Whilst I've never 'built' a machine before I have friends who can help me with that. The question I would ask you all here you use the phrase 'A better custom DAW' so how better is 'better' ..... if you were going to put a percentage on it how much better will a custom machine machine be . . . and I guess from that I can then work out if it's worth the effort
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/18 16:09:29
(permalink)
It is more about the money... You can buy most pc configurations of the shelf, but it will cost more.
If you do not need to go into heavy projects, you will be ok with a "upper midrange" of the shelf pc.
All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Jim Roseberry
Max Output Level: 0 dBFS
- Total Posts : 9871
- Joined: 2004/03/23 11:34:51
- Location: Ohio
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/19 11:37:03
(permalink)
With a custom machine, you have complete control over what goes in... and exactly how it's configured. Choose top-tier components for each... and configure it well... and you'll have a machine that's superior to an off-the-shelf machine. You won't get that attention to detail (DAW performance) in a general-purpose solution. - Case (quiet/robust)
- Motherboard (quality unit with proper parameters for super low/consistent DPC Latency)
- HDs or SSDs (fast quiet units)
- Power-supply (robust quiet unit)
- CPU cooler (over-spec'd large/quiet unit)
- OS Install (clean/lean - no "value added" bloat)
The higher your performance expectations, the more significant the difference Whether you need that level of performance... that's a question only you can answer. 
|
kitekrazy1
Max Output Level: -40 dBFS
- Total Posts : 3524
- Joined: 2014/08/02 17:52:51
- Status: offline
Re: New P.C. for DAW usage Question 1
2015/09/19 14:09:13
(permalink)
IfItMovesFunkIt
Thanks for your input guys . . . Whilst I've never 'built' a machine before I have friends who can help me with that. The question I would ask you all here you use the phrase 'A better custom DAW' so how better is 'better' ..... if you were going to put a percentage on it how much better will a custom machine machine be . . . and I guess from that I can then work out if it's worth the effort
It's like legos. Also read lots of reviews. Assembly is part of the review process.
Sonar Platinum, W7 Pro 32GB Ram, Intel i7 4790, AsRock Z97 Pro 4, NVidia 750ti, AP2496 Sonar Platinum, W7 Pro, 16GB Ram, AMD FX 6300, Gigabyte GA 970 -UD3 P, nVidia 9800GT, Guitar Port, Terratec EWX 2496
|