cpkoch
Max Output Level: -84 dBFS
- Total Posts : 345
- Joined: 2014/02/07 17:00:26
- Location: Edgewater, Florida
- Status: offline
No Audio Devices Runnig
When I run CbB and try to launch SPLAT I get a message on my SPLAT start up that says in effect that "No Audio Devices Running. Please go to preferences and assign etc. etc." The same thing happens when I am running SPLAT and try to start CbB. Why is this the case? Can I not run both programs simultaneously?
Sonar Platinum, HP Z210 Desktop PC, Windows 10 64 Bit, 12 GB RAM, Steinberg UR22 Interface Unit, M-Audio Keyboard Studio USB MIDI Keyboard, APEX-TK -Condenser Unidirectional MIC, Audio Technica AT2020 USB MIC
|
mkerl
Max Output Level: -87 dBFS
- Total Posts : 190
- Joined: 2015/03/26 17:13:30
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 01:03:08
(permalink)
Caused by Audio -Drivers, I resume you are in ASIO-Mode. That means, one at a time. Possibly you could change to MME or what ever, but look out - Lantency!!!!! Cheers 
Nothing to do but playing (Ch. Parker)
|
cpkoch
Max Output Level: -84 dBFS
- Total Posts : 345
- Joined: 2014/02/07 17:00:26
- Location: Edgewater, Florida
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 01:35:42
(permalink)
Thank you! Yes I am in the ASIO mode. I will take your advise and go to another Driver Mode! ... and the result is ..... Yup yup yup .... it works to bring on board audio devices. Haven't checked out latency and am not sure I know how!
Sonar Platinum, HP Z210 Desktop PC, Windows 10 64 Bit, 12 GB RAM, Steinberg UR22 Interface Unit, M-Audio Keyboard Studio USB MIDI Keyboard, APEX-TK -Condenser Unidirectional MIC, Audio Technica AT2020 USB MIC
|
mkerl
Max Output Level: -87 dBFS
- Total Posts : 190
- Joined: 2015/03/26 17:13:30
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 02:00:48
(permalink)
You could look in preferences, Audio for Drivers and Latency. There are some Apps out there to check Lantency, too, but honestly, I've never used something like that. As you know, Google is your friend  But lately, you'll notice bad latency immediately  Edit: Oh, I forgot to mention, ASIO is usually the best choice. Cheers 
post edited by mkerl - 2018/12/11 02:30:23
Nothing to do but playing (Ch. Parker)
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 04:00:23
(permalink)
ASIO is the ONLY choice for working with Audio overdubs. All other modes can be out of sync. MME mode is the worst of all for performance and is not necessary as we have WDM and WASAPI. WASAPI shared would be a second choice.
But there no reason you cannot have 2 versions of Cakewalk open other than if the sample rates were different. I often have Cakewalk, Wave Lab and Win AMp open while working.
And I have had 2 versions of Cakewalk open in the past while doing something weird....Anyhow stay with ASIO if you can if not try WASAPI shared.
|
msmcleod
Max Output Level: -72 dBFS
- Total Posts : 920
- Joined: 2004/01/27 07:15:30
- Location: Scotland
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 10:41:34
(permalink)
If you have a device with ASIO drivers and they're not showing up, try re-installing the ASIO drivers.
I've had this happen once or twice after a windows update.
Mark McLeod Cakewalk by BL | ASUS P8B75-V, Intel I5 3570 16GB RAM Win 10 64 + Win 7 64/32 SSD HD's, Scarlett 18i20 / 6i6 | ASUS ROG GL552VW 16GB RAM Win 10 64 SSD HD's, Scarlett 2i2 | Behringer Truth B2030A / Edirol MA-5A | Mackie MCU + C4 + XT | 2 x BCF2000, Korg NanoKontrol Studio
|
Jesse G
Max Output Level: -32.5 dBFS
- Total Posts : 4282
- Joined: 2004/04/14 01:43:43
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 14:41:15
(permalink)
There used to be the option:
EDIT> Preferences> Audio> Playback and Recording and check the box marked Share Drivers With Other Programs. However, in CbB I don't see that option any longer.
I use ASIO and I am able to open other DAW software and use it while working in CbB.
Peace,Jesse G. A fisher of men <>< ==============================Cakewalk and I are going places together!
Cakewalk By Bandlab, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.[/
|
mkerl
Max Output Level: -87 dBFS
- Total Posts : 190
- Joined: 2015/03/26 17:13:30
- Status: offline
Re: No Audio Devices Runnig
2018/12/11 15:33:24
(permalink)
Jesse G
There used to be the option:
EDIT> Preferences> Audio> Playback and Recording and check the box marked Share Drivers With Other Programs. However, in CbB I don't see that option any longer.
I use ASIO and I am able to open other DAW software and use it while working in CbB.
There's the option Stop Audio Engine when not in Focus. Both DAWs in ASIO? What? Never worked for me. Second DAW has to change Driver Model. Cheers
Nothing to do but playing (Ch. Parker)
|