No audio after bounce to tracks - help please!

Author
Post
Essentials Only Full Version
PhilP
Max Output Level: -90 dBFS
  • Total Posts : 15
  • Joined: 2015/01/16 16:41:33
  • Location: Melbourne Australia
  • Status: offline
2015/07/11 21:17:12 (permalink)

No audio after bounce to tracks - help please!

Hi,
 
I am bouncing one midi track to audio. After doing a fast bounce to a new audio track I can clearly see the new track / audio however I lose audio output for everything, all midi / audio - the lot. Meters still show everything as if still playing properly (midi and audio), master bus shows output going to my VS100 and the VS100 meters in Sonar show output signal however I can't hear anything and my VS100 shows no input. Any ideas as to what I am doing wrong? This is driving me nuts!! Thanks in advance for any help / ideas.
 
Edit: If I reboot PC, reload the project to state before bounce then the audio works again.
Edit: Deselecting fast bounce resulted in fatal crash - error reported failed in trying to send to Cake.
post edited by PhilP - 2015/07/11 21:53:10

i3770k ivy bridge. 16G ram. W7 64 bit. 4 x Samsung Evo 240G SSD's. Various external drives. Kustom MX30 console. VS100. A-Pro 500. Emu Proteus 2500 expanded. EW composer cloud all collections. EWQL Hollywood strings diamond, solo violin, symphonic orchestra gold, symphonic choirs gold, hollywood brass gold, spaces convolution reverb. Izotope Iris 2. Output Rev. Waves gold. Slate VMR - various other plugs. Assorted other outboard gear.
#1

2 Replies Related Threads
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: No audio after bounce to tracks - help please! 2015/07/12 11:16:55 (permalink)
    I am seeing similar things with the VS-700 when bouncing a clip to a new track, but interestingly it does not happen when exporting tracks/buses or freezing synths (which is at least IMHO a very similar process) ... all audio in Sonar goes silent, but meters indicate playback which however does not get output by the interface ... usually, closing Sonar and starting Sonar again get audio back. On a very few occasions I could get it back by changing ASIO buffer settings and thus forcing some sort of audio interface reset ...
     
    Unfortunately I can't offer any better advice on how to fix this, but I believe this has got something to do with the Roland audio drivers (otherwise there would be a lot more people complaining).
     
    If you have a small project where you can 100% reproduce this, I would pass it in to Cakewalk support ... if the problem is within Cake's reach, there is a good chance to get it fixed, if it is on Roland's side I wouldn't have any hopes really ...

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #2
    Zargg
    Max Output Level: 0 dBFS
    • Total Posts : 10666
    • Joined: 2014/09/28 04:20:14
    • Location: Norway
    • Status: offline
    Re: No audio after bounce to tracks - help please! 2015/07/12 11:19:07 (permalink)
    Which version of SONAR do you use? (I cannot find it in your signature) Can you make a screenshot, and share?
    Best of luck.

    Ken Nilsen
    Zargg
    BBZ
    Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
    Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
     
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1