Chichero
Max Output Level: -90 dBFS
- Total Posts : 8
- Joined: 2015/01/22 16:40:13
- Status: offline
No sound from my TTS-1
In the past, for some reason, SONAR used to stop producing sounds. The remedy was to re-install SONAR and the problem was gone. Two weeks ago, however, SONAR stopped producing sound from existing files that were OK before. Formerly when I clicked to a MIDI file it launched SONAR and when no instrument were yet included, SONAR attached TTS-1 automatically the first time around. Now, it does not. Even if I insert a new synth, the instrument does not show up at the end of the track list, but on the right side of the screen. When this happens, no sound is produced.
I re-installed the software twice after carefully deleting all VST's, SONAR and anything thing related with SONAR Platinum. However, after freshly installed, still no sound is produced. It is not hardware related because everything works, except sound related to SONAR.
Lastly, I noticed that after de-installing ad re-installing, the software could remember the file history of recent project. I speculate that somehow, the software is copying the configuration file of the damaged version, which may cause the problem.
So, since I erased the previous SONAR directory, the file history must be stored somewhere. Maybe, if I erase that file SONAR may be forced to regenerate a new one and test the hardware in the mean time. The questions are:
Is anyone out there familiar with this problem?
Does anybody knows where the configuration file is stored so I can erase and force Sonar to regenerated?
|
James Argo
Max Output Level: -88 dBFS
- Total Posts : 114
- Joined: 2003/11/06 17:43:18
- Location: Green House Music Lab.
- Status: offline
Re: No sound from my TTS-1
2018/03/29 04:53:53
(permalink)
Sometime -not so often time- , Sonar "lost" its audio device configuration when (for example) you use USB audio device and it's disconnected. Even after you re-connect the USB audio device, you may need to re-config Sonar. Try to see if your audio device is configured correctly in Edit --> Preferences --> Audio device.
 Cakewalk by BandLab! 
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: No sound from my TTS-1
2018/03/29 12:55:58
(permalink)
Hi. You wouldn't happen to be working in 88.2 kHz?
TTS-1 doesn't work in 88.2, and is a known issue.
All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Chichero
Max Output Level: -90 dBFS
- Total Posts : 8
- Joined: 2015/01/22 16:40:13
- Status: offline
Re: No sound from my TTS-1
2018/03/29 17:45:48
(permalink)
Thanks to all that reply to my SOS. Unfortunately, none of the above is the case. My USB is perfectly connected and I am not working with 88.2.
Does anybody know where is the configuration file that SONAR uses to connect to the hardware so I can erase it and force Cakewalk to rebuild it?
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: No sound from my TTS-1
2018/03/29 17:49:56
(permalink)
Try holding down Shift while opening.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
mettelus
Max Output Level: -22 dBFS
- Total Posts : 5321
- Joined: 2005/08/05 03:19:25
- Location: Maryland, USA
- Status: offline
Re: No sound from my TTS-1
2018/03/29 17:59:16
(permalink)
☄ Helpfulby sock monkey 2018/03/29 18:02:23
The other issue from the OP, for SONAR to automatically insert TTS-1, you need to launch a MIDI file using SONAR with no MIDI outputs selected. First disable all MIDI outputs in SONAR, then launch a MIDI file (open with...) SONAR and the TTS-1 will auto-insert (X3 and newer have this feature).
ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
|
Chichero
Max Output Level: -90 dBFS
- Total Posts : 8
- Joined: 2015/01/22 16:40:13
- Status: offline
Re: No sound from my TTS-1
2018/03/29 18:06:10
(permalink)
Sorry. How do I disable the SONAR MIDI outputs and how come that a week ago MIDI files correctly open with SONAR with no need to disable de outputs? The reason of this reply is in that I am trying to find out what changed in the last week that created this effect.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: No sound from my TTS-1
2018/03/29 18:08:42
(permalink)
Zargg
Try holding down Shift while opening.
When opening a project this initiates safe mode. When starting SONAR this causes a partial personalization. A partial personalization does not overwrite files instead it copies missing files into the user directory. Full personalization (CTRL while starting SONAR) overwrites files in the user directory and resets some registry entries. Renaming Aud.ini and TTSSEQ.ini (since this is MIDI related) causes SONAR to restore defaults for this two files the next time the program is started. Similar to full personalization but preserves the old ini files and does not mess with the registry. These files are located in the user directory %appdata%\Cakewalk\ <sonarVersion>
|
mettelus
Max Output Level: -22 dBFS
- Total Posts : 5321
- Joined: 2005/08/05 03:19:25
- Location: Maryland, USA
- Status: offline
Re: No sound from my TTS-1
2018/03/30 01:04:28
(permalink)
Chichero
Sorry. How do I disable the SONAR MIDI outputs and how come that a week ago MIDI files correctly open with SONAR with no need to disable de outputs? The reason of this reply is in that I am trying to find out what changed in the last week that created this effect.
Sorry for the late reply, I was away from the computer. In SONAR if you go to "Preferences->MIDI->Devices" both the input and output devices are listed. Uncheck all of the output devices (lower box), and then when you open a MIDI file with SONAR (Open with... by right clicking the MIDI file, not "importing" it into SONAR) the TTS-1 will be inserted and routed for you. You may also want to check the "Preferences->Audio->Devices" to make sure that what you *think* SONAR is trying to use is accurate (this may also be why you are not hearing sound).
ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
|
abacab
Max Output Level: -30.5 dBFS
- Total Posts : 4464
- Joined: 2014/12/31 19:34:07
- Status: offline
Re: No sound from my TTS-1
2018/03/30 01:25:23
(permalink)
mettelus
Chichero
Sorry. How do I disable the SONAR MIDI outputs and how come that a week ago MIDI files correctly open with SONAR with no need to disable de outputs? The reason of this reply is in that I am trying to find out what changed in the last week that created this effect.
Sorry for the late reply, I was away from the computer. In SONAR if you go to "Preferences->MIDI->Devices" both the input and output devices are listed. Uncheck all of the output devices (lower box), and then when you open a MIDI file with SONAR (Open with... by right clicking the MIDI file, not "importing" it into SONAR) the TTS-1 will be inserted and routed for you.
You may also want to check the "Preferences->Audio->Devices" to make sure that what you *think* SONAR is trying to use is accurate (this may also be why you are not hearing sound).
This ^^^ is the correct answer!
DAW: CbB; Sonar Platinum, and others ...
|