No sound when using ASIO driver

Author
mattmobster
Max Output Level: -90 dBFS
  • Total Posts : 26
  • Joined: 2009/07/28 15:26:41
  • Status: offline
2011/03/18 02:42:05 (permalink)

No sound when using ASIO driver

Hey guys,
 
 Trying to set up audio, had latency probs when not using ASIO , used to video tutorial to set up.
Now Ive changed to ASIO, I dont hear anything. The meters are reading the tracks ok.
Help!
Thanks, M
#1

20 Replies Related Threads

    Kalle Rantaaho
    Max Output Level: -5 dBFS
    • Total Posts : 7005
    • Joined: 2006/01/09 13:07:59
    • Location: Finland
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/18 04:36:27 (permalink)
    Some information on your gear please!

    SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre  -  Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc.
    The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
    #2
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/18 05:24:53 (permalink)
    XP
    Sonar HS7
    UX1+ Podfarm.
    #3
    Kalle Rantaaho
    Max Output Level: -5 dBFS
    • Total Posts : 7005
    • Joined: 2006/01/09 13:07:59
    • Location: Finland
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/18 06:55:05 (permalink)
    So recording and playback of audio did work with some other drivers,
    and inputs and outputs are now exactly the same as before ASIO (when audio was working) ?

    Is it both playback and recording that aren't working? What kind of audio are we talking about - playback of soft synths or recording of drums with microphones?

    Please give a proper description of the situation. I don't have a lot of energy to start milking for details.

    SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre  -  Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc.
    The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
    #4
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/18 16:49:46 (permalink)
    REcording of audio did work with previous drivers, but latency was too far off, even after I tweeked it.
    Im recording guitar via LIne 6's UX1 interface.
    Both playback and recording are volume-less.
    Input and output are different now I have selected ASIO. They state:
    Lest ASIO UX1 send 1-2
    ASIO UX1 output 1-2
    Any help is appreciated.
    Matthew
    #5
    Kev999
    Max Output Level: -36 dBFS
    • Total Posts : 3922
    • Joined: 2007/05/01 14:22:54
    • Location: Victoria, Australia
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/18 19:22:37 (permalink)
    You certainly need to use ASIO drivers with the UX1.  Other drivers modes will work fine only if you are not using the device for any recording.

    Have you run the Line 6 Monkey and downloaded the latest updates?

    SonarPlatinum(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)
    FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
    Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
    Having fun at work lately
    #6
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 00:10:23 (permalink)
    Just ran Line 6 monkey, got all updates. Still have the same problem. Is there anything I can do In Podfarm to help the lack of volume and/or latency issue?
    #7
    Kev999
    Max Output Level: -36 dBFS
    • Total Posts : 3922
    • Joined: 2007/05/01 14:22:54
    • Location: Victoria, Australia
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 02:08:46 (permalink)
    mattmobster

    Is there anything I can do In Podfarm to help the lack of volume and/or latency issue?
    Leave PodFarm aside for now.  You need to get the UX1 working firstly with Windows and then with Sonar.  Or have you done this already?


    SonarPlatinum(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)
    FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
    Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
    Having fun at work lately
    #8
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 05:44:13 (permalink)
    OK, kinda sorted. Got ASIO going.
    NOW.
    When I play guitar via UX1, I hear a double sound. Im pretty sure that its because I hear UX1 first, then hear HS7 with its latency.
    How can I change this?
    Matthew
    #9
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 09:36:33 (permalink)
    In "Preferences", What are all your I/O buffers, Bit Rates, etc... set to?  What and how are you using for a sound card and monitoring?  Just curious here. 
     
    Also if you could be a little more"specific" on your computer specs. ( Processor, memory, etc...)
     
    Make sure your settings on your Interface/Line6 match what X1 is set to and in preferences check to make sure on inputs and outputs that the Line6 is selected/checked in both
    post edited by digi2ns - 2011/03/19 09:47:00


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #10
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 16:36:14 (permalink)
    Thanks for the help!
    As far as I can tell, Sonar record and playback buffer size are both set to 125
    Sample rate set to 44100
    Using LIne 6 UX1. Headphones from the UX1 to monitor
    The UX1 does not show up on My Computer, so I cant get to its preferences. But when I open UX1 via start menu, it states sample rate 44100, bit depth 16bit, default buffer 512, default bit 16. Buffer size is on extra small.

    Pentium4 2.40Ghz 1 GB RAM ( I know I need more! )
    Thanks Mike
    #11
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 17:10:18 (permalink)
    Plus on playback, the guitar sounds awful, and when I try to add bass, it cuts in and out. CPusage meter is about 1/4!?
    #12
    Kev999
    Max Output Level: -36 dBFS
    • Total Posts : 3922
    • Joined: 2007/05/01 14:22:54
    • Location: Victoria, Australia
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 17:28:15 (permalink)
    mattmobster

    But when I open UX1 via start menu, it states sample rate 44100, bit depth 16bit, default buffer 512, default bit 16. Buffer size is on extra small.
    24-bit would be better.

    Click the Input & Recording tab.  What is Input Select set to?


    SonarPlatinum(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)
    FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
    Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
    Having fun at work lately
    #13
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 17:31:36 (permalink)
    Input selected to Instrument at the moment
    #14
    Kev999
    Max Output Level: -36 dBFS
    • Total Posts : 3922
    • Joined: 2007/05/01 14:22:54
    • Location: Victoria, Australia
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 19:04:28 (permalink)
    mattmobster

    When I play guitar via UX1, I hear a double sound. Im pretty sure that its because I hear UX1 first, then hear HS7 with its latency.
    Are both sounds coming through the headphones, or is one of the sounds coming from speakers?

    Do you have another soundcard (e.g. Realtek) enabled?

    Does the UX1 work ok in Sonar when not recording?

    Does the UX1 work ok outside of Sonar?

    SonarPlatinum(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)
    FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
    Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
    Having fun at work lately
    #15
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 21:17:11 (permalink)
    Both sounds via headphones.
    No other soundcard is enabled ( mine is realtek )
    UX1 works in Sonar when no track is playing - the minute it does it breaks up
    UX1 works fine outside of Sonar.
    #16
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/19 22:25:53 (permalink)
    OK Matt, this is my first thought on the setup.

    Disable Realtek and set UX1 as Default sound device.

    Plug your head phones into the UX1
     
    I would set your record and playback I/O buffers in X1 to match UX1 (512). 
     
    Also as recommended above, I would try and see why UX1 isnt displaying correctly to be selected in X1 or in Windows. 

    Then try and see what ya come up with.

    Let me know, Just curious
    post edited by digi2ns - 2011/03/19 22:33:57


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #17
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/21 14:21:13 (permalink)
    Ill try that today after work!
    #18
    mattmobster
    Max Output Level: -90 dBFS
    • Total Posts : 26
    • Joined: 2009/07/28 15:26:41
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/22 14:24:41 (permalink)
    Ok.
    Kinda got things sorted. The only 2 issues now are:
    When I recorded a guitar, the sound broke up badly. It seems that if thers too much going on ( 1 midi track and 1 audio track? ) it freaks out and breaks up. My CPU meter is barely on 1/4 usage.

    Did an experimental mixdown to mp3. Volume was very low.

    Your help has been appreciated thus far!
    m
    #19
    jbow
    Max Output Level: -0.2 dBFS
    • Total Posts : 7601
    • Joined: 2003/11/26 19:14:18
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/29 21:59:50 (permalink)
    I just checked this evening and there are new drivers for the UX-1 and 2. I updated them a couple of weeks ago so these are really new. If you don't have it, get it and then look in your control panel for the Line6 ASIO panel. Also, the UX has direct monitoring so latency shouldn't be a problem.
     
    HTH,
     
    Julien
    post edited by jbow - 2011/03/29 22:04:07

    Sonar Platinum
    Studiocat Pro 16G RAM (some bells and whistles)
    HP Pavilion dm4 1165-dx (i5)-8G RAM
    Octa-Capture
    KRK Rokit-8s
    MIDI keyboards...
    Control Pad
    mics. 
    I HATE THIS CMPUTER KEYBARD!
    #20
    jbow
    Max Output Level: -0.2 dBFS
    • Total Posts : 7601
    • Joined: 2003/11/26 19:14:18
    • Status: offline
    Re:No sound when using ASIO driver 2011/03/29 22:06:04 (permalink)
    Deleted..
     
    post edited by jbow - 2011/03/29 22:10:23

    Sonar Platinum
    Studiocat Pro 16G RAM (some bells and whistles)
    HP Pavilion dm4 1165-dx (i5)-8G RAM
    Octa-Capture
    KRK Rokit-8s
    MIDI keyboards...
    Control Pad
    mics. 
    I HATE THIS CMPUTER KEYBARD!
    #21
    Jump to:
    © 2024 APG vNext Commercial Version 5.1