Re:PRV Snap question - Bug or I'm doing something wrong?
2012/12/16 13:56:40
(permalink)
I open up the PRV, zoom in, and the smart grid goes to 1/1. But the track snap on the right, which I always set to 16th, goes to whole notes. I'm zoomed in pretty close. I now have to change the track snap to 16th. What am I doing wrong?
Here's my take:
First of all, if you want the Smart grid to work in both Track View and PRV, you'll want to disable the separate PRV grid. Then make sure the last thing you did in the snap settings is enable Smart Grid and/or zoom one of the views, because if you set a specific snap value, it will temporarily override the Smart Grid until you change zoom level.
With these settings, the Smart Grid should follow the zoom level of whichever view was most recently changed. Enable Grid Resolution Follows Snap in the PRV's View menu, and you will be able to see the grid lines follow the zoom level in the Track view, even though the level might not make sense for the current zoom level in the PRV. But if you go to the PRV and change zoom, the Smart Grid will jump to the resolution that makes sense for the zoom level in that view.
For reference, with two measures showing, I'm seeing Smart Grid resolution at 1/16.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz)
Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors