fads
Max Output Level: -88 dBFS
- Total Posts : 117
- Joined: 2014/12/01 10:13:59
- Status: offline
Panning is not working
I must be doing something wrong here, but I can't get panning to work. It is coming out of both left and right speakers when I pan hard left or hard right.
To test it and make sure it wasn't effects or a send I deleted the sends and went straight to the master out, but it still didn't work.
Any help is much appreciated.
Thanks
64 bit Windows 8.1 Pro, Intel Core 6 5830K 3.5GHZ 32gb of quad channel ram. Presonus Firestudio Tube, Sonar Platinum, build x3e 4 hard drives C: 1 tb SSD Samsung D: 1 tb WD 7200 rpm E: 2 tb WD 7200 rpm Y: 2 tb WD 7200 rpm https://www.youtube.com/watch?v=BQGIeJcGmxU
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 2009/01/05 17:32:38
- Status: offline
Re: Panning is not working
2015/09/10 20:39:25
(permalink)
Is the interleave on your master set to mono?
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
offrampmusic
Max Output Level: -90 dBFS
- Total Posts : 4
- Joined: 2015/08/24 15:29:52
- Status: offline
Re: Panning is not working
2015/09/11 01:47:30
(permalink)
My panning is also not working. I was hoping to find help in this post. In my 15 or so recorded tracks, some of them will pan and some are "stuck." They are not stuck at center.
I created the project from an existing one by doing a Save As so I could mess with the mix. So now I have a number of tracks that are frozen in the pan position from my previous project. Some tracks pan, some are frozen. Anyone have any ideas?
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re: Panning is not working
2015/09/11 23:31:27
(permalink)
Pan envelopes? If one exists and is centered, the pan knob itself would snap back to center position on playback.
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
offrampmusic
Max Output Level: -90 dBFS
- Total Posts : 4
- Joined: 2015/08/24 15:29:52
- Status: offline
Re: Panning is not working
2015/09/12 13:34:36
(permalink)
Thanks, Steve. Good thought but I did check for that. In fact sometimes I find an envelope that I didn't know about lurking at the bottom of the track view. In this case I even added a pan envelope to see if I could move the sound but the output ignored the envelope as well.
I have other tracks that work fine. e.g. the vocal track pans. I tried redirecting my hi-hat track (one of the problem tracks) to the vocal bus and it still didn't work. I think it's a bug in the program but I wanted to try everything I could think of first before reporting. In the meanwhile I have a workaround. Thanks again.
|
gcolbert
Max Output Level: -67 dBFS
- Total Posts : 1176
- Joined: 2010/11/13 18:34:06
- Location: Windsor Mill, MD
- Status: offline
Re: Panning is not working
2015/09/12 20:15:40
(permalink)
offramp - have you checked the track interleave (button looks like two circles in a ven diagram)? Paning is for mono tracks.
Glen
Platinum / VS-100 / 12 GB RAM / Win 10 Pro / AMD A8 / MP Touch MonitorsPlatinum / on-board audio / 4 GB RAM /Win 10 Pro / HP dm4 Laptop / stuffTHpfft!
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Panning is not working
2015/09/13 04:35:11
(permalink)
In Track View, what is the waveform showing? It will either be one wave for mono or 2 waves for stereo. You can only really pan mono signals. With stereo, the pan control acts like a balance control found on HiFi equipment. Depending on how the (stereo) signal was recorded it may or may not pan at all. In situations like this, drop a copy of Channel Tools, either in the Fx bin or as a chain in the Pro Channel. You can then place any signal wherever you want in the stereo field
post edited by Bristol_Jonesey - 2015/09/13 04:44:15
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
rodreb
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2003/11/06 14:59:42
- Location: Ohio
- Status: offline
Re: Panning is not working
2015/09/13 04:41:19
(permalink)
I have had this happen occasionally, too. Sounds like a random bug.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Panning is not working
2015/09/13 06:39:31
(permalink)
Don't think so Rod.
This behaviour is nearly always pilot error
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|