Platinum and X3E Step Seq Am I the only one seeing this(still not working reliably)

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2013/12/17 14:55:38 (permalink)
CWBRN-20128 seems to still be an issue

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#31
Splat
Max Output Level: 0 dBFS
  • Total Posts : 8672
  • Joined: 2010/12/29 15:28:29
  • Location: Mars.
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2013/12/17 15:12:06 (permalink)
Darn, thanks. I assume people can confirm this?

Sell by date at 9000 posts. Do not feed.
@48/24 & 128 buffers latency is 367 with offset of 38.

Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
#32
Splat
Max Output Level: 0 dBFS
  • Total Posts : 8672
  • Joined: 2010/12/29 15:28:29
  • Location: Mars.
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2014/03/19 05:41:27 (permalink)
According to documentation not fixed in X3E would be nice if this is confirmed though. Thanks.

Sell by date at 9000 posts. Do not feed.
@48/24 & 128 buffers latency is 367 with offset of 38.

Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
#33
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2014/03/19 08:42:52 (permalink)
CakeAlexS
According to documentation not fixed in X3E would be nice if this is confirmed though. Thanks.


Confirmed...not fixed

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#34
Splat
Max Output Level: 0 dBFS
  • Total Posts : 8672
  • Joined: 2010/12/29 15:28:29
  • Location: Mars.
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2014/03/19 09:16:22 (permalink)
Thanks..

Sell by date at 9000 posts. Do not feed.
@48/24 & 128 buffers latency is 367 with offset of 38.

Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
#35
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/27 09:53:18 (permalink)
So Now we have Platinum and this is still not fixed............................
 
 
rafone

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#36
scook
Forum Host
  • Total Posts : 24146
  • Joined: 2005/07/27 13:43:57
  • Location: TX
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/27 10:20:24 (permalink)
All it takes is double-clicking once to open the Step Sequencer and once again to load the step sequencer clip. Or, don't close the step sequencer view, then double-click on any step sequencer clip to edit in the step sequencer view.
#37
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/27 12:52:34 (permalink)
scook
All it takes is double-clicking once to open the Step Sequencer and once again to load the step sequencer clip. Or, don't close the step sequencer view, then double-click on any step sequencer clip to edit in the step sequencer view.


The problem is that after saving the project and reopening the map is gone.  If you reapply the map you won't see any of the existing events.
 
rafone

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#38
scook
Forum Host
  • Total Posts : 24146
  • Joined: 2005/07/27 13:43:57
  • Location: TX
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/27 13:29:35 (permalink)
I just followed the formula in msg #1.
After re-opening the project, double-clicking on the step sequencer clip opens an step sequencer with the map applied (I am using AD2 map supplied by CW but it should not matter), double-clicking the clip again populates the step sequencer. I am running 64bit Cambridge on Win7 but this should not matter either.
#39
brundlefly
Max Output Level: 0 dBFS
  • Total Posts : 14250
  • Joined: 2007/09/14 14:57:59
  • Location: Manitou Spgs, Colorado
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/27 13:47:35 (permalink)
meh
 
The problem is that after saving the project and reopening the map is gone.



That would be a different issue altogether, and I can't reproduce it. Let's not clutter this thread with an unrelated issue.

SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
#40
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/27 13:56:36 (permalink)
scook
I just followed the formula in msg #1.
After re-opening the project, double-clicking on the step sequencer clip opens an step sequencer with the map applied (I am using AD2 map supplied by CW but it should not matter), double-clicking the clip again populates the step sequencer. I am running 64bit Cambridge on Win7 but this should not matter either.


Yes this is what I am doing also....but it "unreliable" sometimes that works and sometimes it does not.
 
Thanks for trying it though
 
rafone

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#41
brundlefly
Max Output Level: 0 dBFS
  • Total Posts : 14250
  • Joined: 2007/09/14 14:57:59
  • Location: Manitou Spgs, Colorado
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/28 00:58:07 (permalink)
I may have found a superior workaround for this. I find that if I first open the clip in the PRV by choosing Piano Roll from the view selector in the corner of the clip, close that view, and then re-open it in Step Sequencer by the same method, then it opens correctly with only used rows showing as it should, and it will continue opening correctly from then on, including after saving the project with Step Sequencer closed.

SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
#42
robert_e_bone
Moderator
  • Total Posts : 8968
  • Joined: 2007/12/26 22:09:28
  • Location: Palatine, IL
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/28 05:16:45 (permalink)
I just quite using drum maps in Step Sequencer, and I have a laminated Word doc page with a table showing the kit pieces for each note number/name, but I long ago just memorized which notes are assigned to which drum kit pieces, so it isn't an issue for me.
 
I had posted about this issue going back as far as either 8.5.3 or X1 (can't remember which), so this has been out there for quite a long while and I don't think they are going to change things anytime soon.
 
Bob Bone
 

Wisdom is a giant accumulation of "DOH!"
 
Sonar: Platinum (x64), X3 (x64) 
Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22
Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64
Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others
MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es
Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms  
#43
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/28 10:00:29 (permalink)
robert_e_bone
I had posted about this issue going back as far as either 8.5.3 or X1 (can't remember which), so this has been out there for quite a long while and I don't think they are going to change things anytime soon.
 Bob Bone
 

That would be too bad since it's such a fundamental function.
 
rafone

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#44
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 2005/06/11 13:01:57
  • Location: Tempe, Az
  • Status: offline
Re: X3a Step Seq Am I the only one seeing this 2015/03/28 10:09:46 (permalink)
brundlefly
I may have found a superior workaround for this. I find that if I first open the clip in the PRV by choosing Piano Roll from the view selector in the corner of the clip, close that view, and then re-open it in Step Sequencer by the same method, then it opens correctly with only used rows showing as it should, and it will continue opening correctly from then on, including after saving the project with Step Sequencer closed.



1.  first open the clip in the PRV by choosing Piano Roll from the view selector in the corner of the clip
2.  close that view
3.  then re-open it in Step Sequencer by the same method
 
I think I'm doing this the same way....but I don't get reliable results.
 
thx for the suggestion
rafone

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#45
Page: < 12 Showing page 2 of 2
Jump to:
© 2025 APG vNext Commercial Version 5.1