RedSkyRoad
Max Output Level: -85 dBFS
- Total Posts : 258
- Joined: 2008/04/17 00:53:37
- Location: Johannesburg, South Africa
- Status: offline
Possible to SEND from FX Bin or pre-FX?
Hi, Currently the SEND runs pre- or post-fader. Is it possible to SEND from the FX Bin? I want to send the dry synth signal to sidechain another track but currently my reverb on the signal I'm sending is keeping the release on the compressor to long...
post edited by RedSkyRoad - 2017/05/07 05:26:34
Intel Core i7-5820K Hex/6 core16GM Ram : Kingston Hyper-X FURY Memory Black - DDR4 2133MHz (HX421C14FBK2/8 DDR4-2133) ASUS Strix GTX 960Asus X99-A/USB3.1Kingston 480Gb Hyper-X Predator PCIe SSD (SHPM2280P2H/480G NGFF M.2)Corsair Hydro Series H100i GTXCorsair Gamer Series CXM600 600W Power Supply.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 05:53:31
(permalink)
|
Kamikaze
Max Output Level: -45 dBFS
- Total Posts : 3013
- Joined: 2015/01/15 21:38:59
- Location: Da Nang, Vietnam
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 06:14:27
(permalink)
Do you use a reverb bus. Putting the reverb on the bus and using the sends to send it a clean signal, will mean the reverb isn't in the FX bin for the track, so the sends are clean.
|
Sanderxpander
Max Output Level: -36.5 dBFS
- Total Posts : 3873
- Joined: 2013/09/30 10:08:24
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 08:20:43
(permalink)
You could just create a dry copy and output that directly. Or use a patch point, I think. Actually no patchpoint because you have to create them from a send I think which is a shame. There's also a set of VSTs called AuxBus which can be inserted anywhere and act as sends.
|
RedSkyRoad
Max Output Level: -85 dBFS
- Total Posts : 258
- Joined: 2008/04/17 00:53:37
- Location: Johannesburg, South Africa
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 09:05:48
(permalink)
Kamikaze
Do you use a reverb bus. Putting the reverb on the bus and using the sends to send it a clean signal, will mean the reverb isn't in the FX bin for the track, so the sends are clean.
Each instrument has a unique reverb. Bussed reverbs won't work for me. Sanderxpander
You could just create a dry copy and output that directly. Or use a patch point, I think. Actually no patchpoint because you have to create them from a send I think which is a shame. There's also a set of VSTs called AuxBus which can be inserted anywhere and act as sends.
AuxBus won't work either because I can't send it to a compressor sidechain. I had to send the whole strip to an AUX channel and move all the FX in the bin to the AUX channel to get a dry signal in the AUDIO channel to send as a side-chain source... Cakewalk, how hard can it be to create a SEND vst? FL studio has one...
Intel Core i7-5820K Hex/6 core16GM Ram : Kingston Hyper-X FURY Memory Black - DDR4 2133MHz (HX421C14FBK2/8 DDR4-2133) ASUS Strix GTX 960Asus X99-A/USB3.1Kingston 480Gb Hyper-X Predator PCIe SSD (SHPM2280P2H/480G NGFF M.2)Corsair Hydro Series H100i GTXCorsair Gamer Series CXM600 600W Power Supply.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 10:38:39
(permalink)
cant you clone the track, send its output to the source, then record the sidechain data using automation.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 11:29:08
(permalink)
RedSkyRoad
Kamikaze
Do you use a reverb bus. Putting the reverb on the bus and using the sends to send it a clean signal, will mean the reverb isn't in the FX bin for the track, so the sends are clean.
Each instrument has a unique reverb. Bussed reverbs won't work for me.
Sanderxpander
You could just create a dry copy and output that directly. Or use a patch point, I think. Actually no patchpoint because you have to create them from a send I think which is a shame. There's also a set of VSTs called AuxBus which can be inserted anywhere and act as sends.
AuxBus won't work either because I can't send it to a compressor sidechain.
I had to send the whole strip to an AUX channel and move all the FX in the bin to the AUX channel to get a dry signal in the AUDIO channel to send as a side-chain source...
Cakewalk, how hard can it be to create a SEND vst? FL studio has one...
If it's just the one synth track you're trying to send then why not put that particular reverb on a bus and send to it? If you plan on doing this with multiple tracks then obviously this won't work (unless you want a really cluttered Buss pane)
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: Possible to SEND from FX Bin or pre-FX?
2017/05/07 13:56:58
(permalink)
☄ Helpfulby Kamikaze 2017/05/07 14:29:11
This is what linked clones are for. If it's an instrument track, split it into MIDI and audio tracks. Then clone the audio track, check the box in the clone options labeled "Link to Original Clip(s)" and un-check the "Clone Effects" option. The result is effectively a pre-FX send.
 All else is in doubt, so this is the truth I cling to. My Stuff
|