jamesyoyo
Max Output Level: -40.5 dBFS
- Total Posts : 3460
- Joined: 2007/09/08 17:50:10
- Location: Factory Yoyo Prods Ltd.
- Status: offline
Pro Channel HPF issues: from X2 this crap is happening still in X3e
Again, I was working on a song and then suddenly, wherever I did not have automation controls on the ProChannel HPF freq, it just decided to move it up significantly, from wherever it was to 8k-20k, with no rhyme nor reason. Did not happen to busses, only to tracks.
Any one else see this happening in X3e?
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/08 18:23:27
(permalink)
Does it jump in the same place every time? If so, what does the automation lane look like at that point?
|
jamesyoyo
Max Output Level: -40.5 dBFS
- Total Posts : 3460
- Joined: 2007/09/08 17:50:10
- Location: Factory Yoyo Prods Ltd.
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/08 19:17:40
(permalink)
Anderton
Does it jump in the same place every time? If so, what does the automation lane look like at that point?
No, it isn't pinned at any particular point from what I can tell. The automation lane is clear, meaning there if wasn't one before for HPF control (cuz if there was an automation lane for HPF there's no change)
|
stxx
Max Output Level: -82 dBFS
- Total Posts : 406
- Joined: 2010/01/31 17:32:02
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/09 20:06:15
(permalink)
You have something buried causing the issue. look harder
Sonar Platinum, RME UFX, UAD 2, Waves, Soundtoys, Fronteir Alphatrack, X-Touch as Contl Srfc, , Console 1, Sweetwater Creation Station Quad Core Win 8.1, Mackie 824, KRK RP5, AKG 240 MKII, Samson C-Control, Sennheiser, Blue, AKG, RODE, UA, Grace, Focusrite, Audient, Midas, ART Song Portfolio: https://soundcloud.com/allen-lind/sets/oth-short
|
jamesyoyo
Max Output Level: -40.5 dBFS
- Total Posts : 3460
- Joined: 2007/09/08 17:50:10
- Location: Factory Yoyo Prods Ltd.
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/09 22:33:02
(permalink)
stxx
You have something buried causing the issue. look harder
Umm, no I don't think so. This behavior has been popping up since X2. The code has an obvious bug.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/09 23:07:16
(permalink)
If it is an obvious bug, then it's likely other people would have noticed it as well. I've automated HPF without incident. Tried it again in case it was an X3e thing, but again, it worked. If this really had been a problem since X2, surely someone would have responded to your query whether anyone else had experienced this behavior.
If it's not an obvious bug, we would need more info. I'm not sure, for example, what this means: "The automation lane is clear, meaning there if wasn't one before for HPF control (cuz if there was an automation lane for HPF there's no change)
If it's pilot error, we would also need more info.
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/10 01:55:54
(permalink)
Anderton
I've automated HPF without incident. Tried it again in case it was an X3e thing, but again, it worked.
Craig, I think he's saying that he's resorted to using a flatline automation envelope to ensure the HPF doesn't change because it's prone to change spontaneously if not deliberately locked in by a fixed automation level. My only thought is that a flaky control surface might be sending spurious commands.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
markyzno
Max Output Level: -66 dBFS
- Total Posts : 1216
- Joined: 2011/02/08 06:40:20
- Location: UK
- Status: offline
Re: Pro Channel HPF issues: from X2 this crap is happening still in X3e
2014/04/10 04:57:43
(permalink)
Have you checked your event list to see if any bogus midi was recorded?
Also, have you tried solo'ing the automation read on just that track to identify if its on that track or another one thats triggering it?
Also, if you dont want automation on that track on the pro channel, disable remote control on it.
Sonar Platinum 64 bit > Pro tools 10.3.2 >Intel i7 3770K > 16Gb Ram > Gigabyte Z77-D3H Motherboard> NVIDIA GeForce GTX 660 2 GB > ATi RADEON HD5700 > 240GB OCZ Agility 3 SSD> Win 10 home 64 bit> Delta 1010 > MOTU Audio Express > MA-15D's > NI Ultimate 9 > NI Kontrol S61 1.1 > NI MAschine Studio 2.3 / KORG MS-20 Mini - Arturia MicroBrute > KORG SQ1 - KORG Kaoss Pad KP3 > iPad and IO Dock 2 running various bits > Bunch of guitars >Sound Design on IMDB --
|