graciedog
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 8/15/2006
- Status: offline
Pro Channel Not Working
I have installed X1 Producer both 32 and 64 Bit, and I am learning the new navigations. But I can't get Pro Channel to work at all in either 32 or 64 bit. I click on the buttons to enable (blue) for each of the compression, EQ and tube saturation, but the meter does not move, I don't get any EQ display, and there is no impact on the track's sound. I must be missing something basic, but I can't figure it out.
Ideas?
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 9/14/2007
- Location: Manitou Spgs, Colorado
- Status: offline
Re:Pro Channel Not Working
January 15, 11 10:54 AM
(permalink)
Have you installed the X1a patch? Before that first patch, the Prochannel comp meter only moved when the transport was running, though it would continue to process audibly.
|
graciedog
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 8/15/2006
- Status: offline
Re:Pro Channel Not Working
January 15, 11 11:47 AM
(permalink)
Yes, I have installed the X1a patch.
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 9/14/2007
- Location: Manitou Spgs, Colorado
- Status: offline
Re:Pro Channel Not Working
January 15, 11 12:07 AM
(permalink)
Is this in the Track view or the Console view? In either case, double-check that you're looking at the Inspector/ProChannel for the correct track. Also, are you applying it to existing recorded audio, or input monitored audio?
|
John
Forum Host
- Total Posts : 30467
- Joined: 11/6/2003
- Status: offline
Re:Pro Channel Not Working
January 15, 11 12:19 AM
(permalink)
Also make sure you turn it on.
|
graciedog
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 8/15/2006
- Status: offline
Re:Pro Channel Not Working
January 15, 11 12:19 AM
(permalink)
Thanks for your help. I have tried both Inspector (Track view) and the Console View. I am sure that I am connecting with the correct track. Also, I don't get any response for either recorded audio or for input monitored. And I do have the input monitor button checked.
Still stumped.....
|
emwhy
Max Output Level: -62 dBFS
- Total Posts : 1402
- Joined: 1/3/2006
- Status: offline
Re:Pro Channel Not Working
January 15, 11 1:22 PM
(permalink)
Sent you a PM as well: Run the vst scanner again. That should cure it especially after applying the X1a patch.
post edited by emwhy - January 15, 11 1:23 PM
|
PeterMc
Max Output Level: -80 dBFS
- Total Posts : 504
- Joined: 11/12/2003
- Location: Tasmania
- Status: offline
Re:Pro Channel Not Working
January 15, 11 3:29 PM
(permalink)
In the Inspector:
Turn up the knob labelled "Input" on the 76 compressor - you should eventually see the meter move.
Do you see anything in the EQ graph? You should be able to see a graph of the EQ settings.
Do the little lights next to the on/off switches ever activate?
Cheers, Peter.
i5 6500, H170M, Intel HD 530, 16GB, Focusrite Scarlett 8i6, Win 10 Pro (1803) (64 bit), Cakewalk by Bandlab
|
graciedog
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 8/15/2006
- Status: offline
Re:Pro Channel Not Working
January 16, 11 2:08 PM
(permalink)
Thanks. I reinstalled the X1a patch and re-ran the VST scan, and it works now in both 32 and 64 bit.
|
dp2boy
Max Output Level: -90 dBFS
- Total Posts : 27
- Joined: 8/27/2009
- Status: offline
Re:Pro Channel Not Working
April 03, 11 9:53 AM
(permalink)
graciedog
Thanks. I reinstalled the X1a patch and re-ran the VST scan, and it works now in both 32 and 64 bit.
Hi graciedog, I found your post on a search. I'm having the same problems with ProChannel. I loaded X1-a and X1-b on the same day (I had put X1 aside for a few months because of all the bugs) and ProChannel has never worked even though the lights are on. Did you go back and re-load just X1-a or did you re-load both patches again ? And did you have to rescan the VST folder ? Thanks for any help in advance.
|
HumbleNoise
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 1/4/2004
- Status: offline
Re:Pro Channel Not Working
April 03, 11 10:16 AM
(permalink)
dp2boy
graciedog
Thanks. I reinstalled the X1a patch and re-ran the VST scan, and it works now in both 32 and 64 bit.
Hi graciedog, I found your post on a search. I'm having the same problems with ProChannel. I loaded X1-a and X1-b on the same day (I had put X1 aside for a few months because of all the bugs) and ProChannel has never worked even though the lights are on. Did you go back and re-load just X1-a or did you re-load both patches again ? And did you have to rescan the VST folder ? Thanks for any help in advance.
I thought I read somewhere that that helped with the problem.
Humbly Yours Larry Sonar X2 x64 MAudio 2496 Yamaha MG 12/4 Roland XV-88 Intel MB with Q6600 and 4 GB Ram NVidia 9800 GTX Windows 7 x64 Home Premium
|
dp2boy
Max Output Level: -90 dBFS
- Total Posts : 27
- Joined: 8/27/2009
- Status: offline
Re:Pro Channel Not Working
April 04, 11 8:49 AM
(permalink)
HumbleNoise
dp2boy
graciedog
Thanks. I reinstalled the X1a patch and re-ran the VST scan, and it works now in both 32 and 64 bit.
Hi graciedog, I found your post on a search. I'm having the same problems with ProChannel. I loaded X1-a and X1-b on the same day (I had put X1 aside for a few months because of all the bugs) and ProChannel has never worked even though the lights are on. Did you go back and re-load just X1-a or did you re-load both patches again ? And did you have to rescan the VST folder ? Thanks for any help in advance.
I thought I read somewhere that that helped with the problem.
Well, I reloaded X1a and rescanned the VST folder with no result then tried the whole procedure again and it worked !?!? Strange, but at least I have ProChannel now. Thanks,
|
allyes
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 4/4/2011
- Status: offline
Re:Pro Channel Not Working
April 04, 11 12:30 AM
(permalink)
I experienced the same problem and sent an email to the tech, they say they can't replicate it, and I sent this email just before X1B release hoping they would take care of that. I'm really upset, because I look somewhat foolish in front of my customers, because when I click on pro channel button, it appears blue, but nothing really happens, when I try to change the settings. It is espesially upsetting, because I use this program for production. I even recorded what's happening on camera as proof. Hopefuly the pay attention to what's being written here and fix it! Cheers!
post edited by allyes - April 04, 11 6:42 PM
|