Problem changing sample rate in X1D :Problem Resolved

So, I'm having problems changing the sample rate from within sonarx1d. Preferences>audio driver>asio tab, 

I have had a stable system for years now on this laptop, wich is Win764bit

Recently i updated to x1d and added a Motu micro book 2 my setup wich updated the driver for my 828mk3 as well to version 4.0.53503

!i CAN change the sample rate from the Motu audio console app when sonar is not running!

Anyway I just want someone else to verify that they can change it from within sonar X1D, preferably some one with an 828mk3.

I just want some verification before I star serious trouble shooting...

The only thing I've tried so far was creating a new aud.ini file,

Thanks,


Problem resolved .. See last post...

Sorry mate, can't help you with this one.

I just want to verify that I'm the only one with thus issue., 

I don't think it's hardware specific cause my focusrite also won't switch...

If anyone could try switching sample rates from inside sonarx1d I would appreciate it, 

Thanks...

No I mean with no projects loaded at all!!

Just want verification, 

So your saying that in X1d you have no problems switching sample rates from inside sonar?

Thanks,


Like I stated before I have no problem switching sample rates in the Motu audio control panel only when I try to do it through the x1 preferences,

Create a new project, but first.....Make sure in your driver preferences your default sample rate for new projects is set to what you want. 44100, 48000, etc. Hit apply, then try creating a New project.

All I need from you guys is a yes it works like it should, or no mine also hangs and won't change the sample rate!!

Thanks guys,

Cj: thank you, and yes I am aware of the fact that you can't playback audio recorded at a different sample rate, well some programs will let you but it will be played back faster or slower depending on the rates...

Anywho..

If I remember correctly you also have some Motu products? Are you using the latest driver 4.0.53503

Cj: also do you have any experience with more then one Motu device installed on a system, in my case the 828 mk3 " FireWire only" and the micro book 2 "USB", any know problems having both on one system? Not using them at the same time off course although they will both run at the same time and have separate q mix windows...

What sample rate are you trying to change to? If its 96K and the device can't handle 96K, that could be the problem. 

3, then go to , Edit>preferences>audio driver

 


On this screen, what do you have the Default Settings for New Projects - Sampling Rate set to? 

Also, are you running Sonar on the MacBookPro? 

You should disconnect the Motu MicroBook while working on this because it could be introducing an issue. You should only be using one soundcard at a time. ASIO does not support more than one soundcard at a time. 

Daveny5: default is set to 48, micro book is not connected nor is another audio device or internal sound cards, all sound are off and this is not the MacBook.

Like I said the only difference in my system was adding the microbook wich also updated the 828s drivers and the x1d update, so basically I just wanted to see if 

1, if anybody else experienced this with x1d

2, if anyone else experienced this with the newest Motu drivers

So, it has to be one of the other I was just looking for a direction, either I'm honna reinstall sonar or reinstall/revert the Motu drivers

But also my focusrite Safire pro24 also will not switch sampling rates since I have updated to x1d, that is why I thought sonar was the culprit. We have a Roland octocapture here at my work and some other interfaces I might try as well but first  gonna try to reinstall the Motu stuff and see if that fixes it...

SCorey: thank you, that's exactly the kind of feed back I'm looking for.
Now I just hope someone with similar speks will chime in...


And yes, the 828Mk3 FireWire only is set to internal clock then it is the master for 2 digimax fs's..

Blog man: I don't think your picking up what I'm putting down, you dig?

But thanks for your response anyway...

Bristol:  thanks for your feedback, what focusrite driver version are you on?

I don't think you're pickiin up what I'm layin don here. You're post is about problems changing sample the sample rate in sonar x1 d yes? Sounds to me like you're trying to change the sample rate of Sonar via the preferences, driver settings, asio panel? (with no project open) yes? And it doesn't stay on what you set it? right? I guess my question is are you having problems with creating and loading projects of different frequencies or does it just bother you that the preferences don't stay after you change them (with sonar open and no project loaded). If you set it to 48, close sonar, re-open sonar, it will set to 44.1 if your last actually Loaded project was 44.1 regardless of you trying to 'switch' the frequency prior to loading a project. This isn't hardware/software issue, just the way it works. Just trying to help.