Chrome98
Max Output Level: -90 dBFS
- Total Posts : 48
- Joined: 12/9/2011
- Location: Oregon
- Status: offline
Problems with bouncing synths.
Hi guys, me again. I am struggling with getting my Sound Center synths to accept a midi file and to freeze and/or bounce. Example, I have a flute part in a midi song I'm recording, I have it going to a Sound Center Alto Flute 1, it plays, it shows signal on the synth track. When I attempt to freeze the synth track or bounce it, the volume on the Sound Center Alto Flute 1 window drops to ZERO, or actually it shows -138.50 or what ever it decides. I can see the notes play on the keyboard in the Sound Center window, but nothing is on the synth track. My MIDI track INPUT says OMNI, my OUTPUT says Sound Center 3, INPUT on the synth track is All Input Omni, the OUTPUT is at my Quad Capture. I have audio as long as I don't try and freeze or bounce the track.
When I first got MC6, I went through all the tutorials, I have all of them. I could simply insert a synth from the Sound Center or the Studio Instruments, drag my MIDI track to it, freeze it, bounce it to an audio track, no problems, quick and easy. Now it is a fight to get any of the synth's to take anything let alone freeze and bounce or record.
|
Guitarhacker
Max Output Level: 0 dBFS
- Total Posts : 24398
- Joined: 12/7/2007
- Location: NC
- Status: offline
Re: Problems with bouncing synths.
June 19, 13 3:53 PM
(permalink)
☄ Helpfulby Chrome98 June 19, 13 6:59 PM
Are you SELECTING the track you want to bounce? You have to double click on the track so it changes color AND be sure it includes ALL the clips in that track. If not....the bounce will be very fast and you end up with a new track (on a bounce) that is a flat line. On a freeze, nothing freezes since nothing was selected.
Selecting is very critical. I sometimes do the same thing even now...... I forget to select the track or all the clips in a track.
My website & music: www.herbhartley.com MC4/5/6/X1e.c, on a Custom DAW Focusrite Firewire Saffire Interface BMI/NSAI "Just as the blade chooses the warrior, so too, the song chooses the writer "
|
Chrome98
Max Output Level: -90 dBFS
- Total Posts : 48
- Joined: 12/9/2011
- Location: Oregon
- Status: offline
Re: Problems with bouncing synths.
June 19, 13 6:59 PM
(permalink)
On a freeze, which track do I select? I would assume the synth track, or is it the MIDI track? Same with a bounce, I was understanding that you had to "Solo" both the MIDI and the Synth tracks and then hit bounce to have it go to a new Audio track, yes or no? Is this why the volume in the Sound Center window go completely off? I will look and make sure it says Entire clip also, I thought I had that done, but I will double check. Wished I could catch you when I'm actually working on this stuff. Thanks.
|
Guitarhacker
Max Output Level: 0 dBFS
- Total Posts : 24398
- Joined: 12/7/2007
- Location: NC
- Status: offline
Re: Problems with bouncing synths.
June 19, 13 9:10 PM
(permalink)
☄ Helpfulby Chrome98 June 19, 13 9:33 PM
I normally select BOTH tracks to bounce or freeze.... but I think it is the audio track with the synth in it that counts.
to select both tracks hit control and hold while selecting.
My website & music: www.herbhartley.com MC4/5/6/X1e.c, on a Custom DAW Focusrite Firewire Saffire Interface BMI/NSAI "Just as the blade chooses the warrior, so too, the song chooses the writer "
|
Chrome98
Max Output Level: -90 dBFS
- Total Posts : 48
- Joined: 12/9/2011
- Location: Oregon
- Status: offline
Re: Problems with bouncing synths.
June 19, 13 9:37 PM
(permalink)
Thanks I'll give it a try. By the way, life is so much easier with the Quad-Capture than with the EMu.
Windows 7 , Sonar Platinum, Roland Quad-Capture, Roland SD-50, Peavy PV-10 USB If it ain't broke, don't fix it
|
Guitarhacker
Max Output Level: 0 dBFS
- Total Posts : 24398
- Joined: 12/7/2007
- Location: NC
- Status: offline
Re: Problems with bouncing synths.
June 20, 13 9:08 AM
(permalink)
Chrome98
Thanks I'll give it a try. By the way, life is so much easier with the Quad-Capture than with the EMu.
Excellent!!!! Now sell the EMU on Ebay and use the money for something else.
post edited by Guitarhacker - June 20, 13 9:09 AM
My website & music: www.herbhartley.com MC4/5/6/X1e.c, on a Custom DAW Focusrite Firewire Saffire Interface BMI/NSAI "Just as the blade chooses the warrior, so too, the song chooses the writer "
|
Chrome98
Max Output Level: -90 dBFS
- Total Posts : 48
- Joined: 12/9/2011
- Location: Oregon
- Status: offline
Re: Problems with bouncing synths.
June 20, 13 7:38 PM
(permalink)
For the life of me, I cannot get that 8 bars of MIDI to bounce, freeze, or nothing. I don't have a clue what I'm doing wrong, but 11 hours is enough. I ran the MIDI signal through my SD-50 to the Quad-Capture from the headphone jack and got it to an audio track. good enough for now. Moving on.
Windows 7 , Sonar Platinum, Roland Quad-Capture, Roland SD-50, Peavy PV-10 USB If it ain't broke, don't fix it
|