Q1 - Interfacing Voiceworks/TC Helicon and Layla 24/96

Author
Post
Essentials Only Full Version
Larry Wilson
Max Output Level: -88 dBFS
  • Total Posts : 102
  • Joined: 2011/11/24 19:42:50
  • Status: offline
2012/10/09 19:56:47 (permalink)

Q1 - Interfacing Voiceworks/TC Helicon and Layla 24/96

I want to record vocals using ECHO Layla into X1.  Then route the vocal track audio through the VOICEWORKS for pitch correction, etc.  Had this working fine 8 years ago but can't seem to figure it out now.  Have tried S/PDIF connections and the balanced connections in the Sonar inputs/outputs but no success.  HELP PLEASE.
Thanks.
Larry

Larry Wilson
X1 Producer
Windows 7
Echo Layla 24/96
#1

2 Replies Related Threads
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re:Q1 - Interfacing Voiceworks/TC Helicon and Layla 24/96 2012/10/09 20:34:02 (permalink)
    This is the way I've done it.
     
    1. Create a new track to record the corrected vocal to.
    2. Output the vocal track to an analog output on your interface.
    3. Run a cable from that output to the Voiceworks input.
    4. Connect the output of the Voiceworks to an input on your interface.
    5. Set the new track to the input you connected the Voiceworks to and set the output of this track to none.
     
    Check all your levels. this should do it.

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #2
    Larry Wilson
    Max Output Level: -88 dBFS
    • Total Posts : 102
    • Joined: 2011/11/24 19:42:50
    • Status: offline
    Re:Q1 - Interfacing Voiceworks/TC Helicon and Layla 24/96 2012/10/09 21:02:06 (permalink)
    Bob,
    Thanks for the quick reply.  I believe I've done all of the above.  Have S/PDIF cables in and out. On the original vocal track I have output set to LEFT ECHO ASIO S/PDIF.  On the new track, the input is set as LEFT ECHO ASIO S/PDIF.  New track is armed for recording.  Nothing being recorded.  Have double checked the S/PDIF settings.  On VOICEWORKS, the mic button is off.  Any ideas?
    Larry

    Larry Wilson
    X1 Producer
    Windows 7
    Echo Layla 24/96
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1