Question about building a room for recording

Author
mosk
Max Output Level: -89 dBFS
  • Total Posts : 93
  • Joined: 2008/10/21 09:15:31
  • Location: Richmond, VA
  • Status: offline
2014/01/26 18:01:04 (permalink)

Question about building a room for recording

Doing some repairs and additions to our house, and I'm considering relocating my work area from our bedroom down to a new room in the basement - any advice on how to make this a good in terms of recording vocals?  (or links where to get some basic info on this topic in terms of walls, flooring, or whether or not a basement is an okay area for recording)
 
Thanks

Mosk the Scribe
#1

5 Replies Related Threads

    cuitlahac
    Max Output Level: -87 dBFS
    • Total Posts : 196
    • Joined: 2011/07/24 20:09:52
    • Location: Albuquerque, NM,USA
    • Status: offline
    Re: Question about building a room for recording 2014/01/26 19:56:41 (permalink)
    I found this video to have some good and sensible information in it.  It's a little long but well worth the time.
     
    http://www.sweetwater.com/insync/case-study-project-studio-design-build-with-mitch-gallagher/?utm_source=insync&utm_medium=email&utm_campaign=insync-20131227
     
    Best of luck!

    Dave-
    SONAR Platinum, +Producer 5,7,8.5,X1PE, X2, X3e,Win7 Pro 64bit, SoundForge 10, CD Architect, Izotope 7 Advanced & Insight Metering, RAIN ION rack PC, (Nehalem) Xeon(R) CPU @ 3.06Ghz, 6GB DDR3 Ram, 2 WD640GB SATA II 7200rpm HDD's, LaCie 300GB HDD , ATI Radeon 4650 graphics (1GB) running Dual Monitors, Antelope Orion 32 + MP32 Pre's, SSL Matrix 2 Hybrid Console, M-Audio Bx8a Monitors w/ Energy 90w-12" sub, Roland A-800 PRO, BOSS BR-1600 DRS, Shure KSMs, 85s, 57s, 58s, Shure PSM Monitor, Gibson guitars, Fender P Bass.
    #2
    bitflipper
    01100010 01101001 01110100 01100110 01101100 01101
    • Total Posts : 26036
    • Joined: 2006/09/17 11:23:23
    • Location: Everett, WA USA
    • Status: offline
    Re: Question about building a room for recording 2014/01/26 20:13:11 (permalink)
    For a typical basement room, with concrete walls and a low ceiling, your best strategy is to use as much acoustical absorption as is practical.
     
    The idea is to make the room as dead as possible, because the room itself will probably not have naturally pleasant reverberant properties. The vocal recordings you make in such a room will be very dry, but you can liven them with artificial reverb.
     
    The most popular material for this is Owens-Corning 703 (rigid fiberglass) or equivalent, such as Rockwool (generically "mineral wool") or Roxul. Your building supply store or an insulation supplier can suggest alternative brands, although it's likely you'll have to special-order them. There are also online sources, but you'll have to pay shipping so the savings aren't huge. 703 comes in 1", 2" and 4" thicknesses. Get whatever's available and layer them if necessary to get the desired thickness, which will be 3-4 inches, thicker in the corners if possible.
     
    Build frames, preferably tall enough to go from floor to ceiling, and fill them with 4 inches of fiberglass. Fill the room's corners with extra-thick fiberglass insulation. Hang a frame from the ceiling by chains, as thick and as far from the ceiling as is practical without bumping your head. Staple burlap or other porous fabric over their faces to contain the fiberglass and make them look nicer.
     
    The panels can be attached to the wall or free-standing. I prefer movable panels so you can reconfigure them as needed, e.g. making room for more than one singer. Whether attached or free-standing, you want them at least 4 inches from the wall if possible.
     
    If it's an unfinished basement with exposed floor joists, fill the space between the joists with regular pink fluffy insulation.


    All else is in doubt, so this is the truth I cling to. 

    My Stuff
    #3
    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re: Question about building a room for recording 2014/01/26 20:38:03 (permalink)
    Hey did you know they make Roxul here in my home town!  If you want dead just fill your cavities with Roxul, it is also 100% fire proof and non allergenic.
    I like Cedar on my walls too. Wood seems to impart a nice warm vibe to a room.
    Main idea is nothing should be reflective or parallel. Make everything crooked. My studio had every wall on a different plane and I had the trusses made with a 6" rise to the centre so even the ceiling was not parallel to the floor. Carpet will suffice over concrete, use commercial grade. 
    Or install real wood floating floor and use some nice Persian rugs  "they really tie the room together" . ( the Dude )  

    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #4
    Paul P
    Max Output Level: -48.5 dBFS
    • Total Posts : 2685
    • Joined: 2012/12/08 17:15:47
    • Location: Montreal
    • Status: offline
    Re: Question about building a room for recording 2014/01/26 21:36:21 (permalink)
     
    Everything you could ever need in the way of info :
     
    http://www.gearslutz.com/board/studio-building-acoustics/

    Sonar Platinum [2017.10], Win7U x64 sp1, Xeon E5-1620 3.6 GHz, Asus P9X79WS, 16 GB ECC, 128gb SSD, HD7950, Mackie Blackjack
    #5
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re: Question about building a room for recording 2014/01/27 02:49:27 (permalink)
    Here's another very useful source of information:
     
    http://www.johnlsayers.com/

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #6
    Jump to:
    © 2025 APG vNext Commercial Version 5.1