kotrance
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2015/04/23 11:13:42
- Status: offline
Rapture Pro Issues
Hello,
I just installed Rapture Pro and I am having issues with it in FL Studio and as a Standalone. In FL, the vst will load correctly but the second I hit a note on the midi keyboard or assign a midi note to it, it holds the note/sound in the instrument and wont stop playing it. The only thing to stop it is to delete the instance of Rapture Pro. If I don't hit a note on first load up/instance of Rapture Pro and i click on the mixer tab, then back to browser, the GUI gets scrambled and then FL Studio crashes prompting a window that says "Access Violation" Also, when i use it as a standalone on my desktop, it sends audio to both my outs on my interface. My main outs are 1/2 on my Kontrol 6 interface but when i play anything it shoots signal to 3/4 also...
On a side note, why is it that when you start the installation setup for x64 bit, there is a section that says "VST 2 Installation Destination" but once installed, there is only a VST3 .dll, no VST2 anywhere, not even in the directed installation destination?
Thanks,
-Kurt
|
Re: Rapture Pro Issues
2015/04/29 17:29:52
(permalink)
kotrance
Hello,
I just installed Rapture Pro and I am having issues with it in FL Studio and as a Standalone. In FL, the vst will load correctly but the second I hit a note on the midi keyboard or assign a midi note to it, it holds the note/sound in the instrument and wont stop playing it. The only thing to stop it is to delete the instance of Rapture Pro. If I don't hit a note on first load up/instance of Rapture Pro and i click on the mixer tab, then back to browser, the GUI gets scrambled and then FL Studio crashes prompting a window that says "Access Violation" Also, when i use it as a standalone on my desktop, it sends audio to both my outs on my interface. My main outs are 1/2 on my Kontrol 6 interface but when i play anything it shoots signal to 3/4 also...
Thanks,
-Kurt
Hey Kurt, welcome to the forums! We have a rad support team that would be able to help you out with this. You can email them or call them. https://www.cakewalk.com/Support/Contact Secondly are yo installing and running the 32bit version or the 64bit version of Rapture Pro? kotrance
On a side note, why is it that when you start the installation setup for x64 bit, there is a section that says "VST 2 Installation Destination" but once installed, there is only a VST3 .dll, no VST2 anywhere, not even in the directed installation destination?
Not too sure what's going on with the VST 2 path, but Rapture Pro so far acts as a VST3 in most hosts. I'll get back to you about this ASAP! -DG
|
kotrance
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2015/04/23 11:13:42
- Status: offline
Re: Rapture Pro Issues
2015/04/30 21:45:10
(permalink)
Hey, Thanks for the link! I'll send them this... To answer your question though.. No, i am installing the 64-bit version and running it with 64-bit FL studio.
post edited by kotrance - 2015/05/01 01:23:12
|
c5_convertible
Max Output Level: -88 dBFS
- Total Posts : 109
- Joined: 2011/01/31 09:37:37
- Status: offline
Re: Rapture Pro Issues
2015/05/01 08:35:47
(permalink)
Just to confirm... I have the same issue in FL Studio 12 64-bit. Don't have the issue in Sonar Platinum nor in Cubase 8.0.10.
Sonar Platinum - Windows 10 x64 - I7 6700K - 32GB RAM - Samsung SSD's for OS (250GB) and sample libraries (500GB) - Focusrite Saffire Pro 40 - Korg Kronos 61 - Yamaha Motif XF8 - JBL LSR 305
|
weeman182
Max Output Level: -90 dBFS
- Total Posts : 19
- Joined: 2015/01/11 21:49:06
- Status: offline
Re: Rapture Pro Issues
2015/05/01 12:32:02
(permalink)
I have the Same issue in Reaper i think this is related to the VST2 plugin as i only think VST3 is supported by Cubase as its a unique design which allows additional midi perameters. Any help? My issue only occurs in loop cycle mode when the first note begins after the first loop. Its related to the plugin as i have deduced other possibilitys - its like when you need a MIDI panic button the note just doesnt end.
|
c5_convertible
Max Output Level: -88 dBFS
- Total Posts : 109
- Joined: 2011/01/31 09:37:37
- Status: offline
Re: Rapture Pro Issues
2015/05/01 15:33:16
(permalink)
I've tried both the VST2 and VST3 versions in FL. No luck on either one. The VST3 works perfectly in Cubase Pro 8. I haven't tried the VST2 in cubase though.
Sonar Platinum - Windows 10 x64 - I7 6700K - 32GB RAM - Samsung SSD's for OS (250GB) and sample libraries (500GB) - Focusrite Saffire Pro 40 - Korg Kronos 61 - Yamaha Motif XF8 - JBL LSR 305
|
DaveGlynn
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2015/01/05 17:28:28
- Status: offline
Re: Rapture Pro Issues
2015/05/01 15:49:29
(permalink)
I can confirm that both the 32bit and 64bit versions of the VST2 plugin do not show in Cubase Pro 8 on Windows 8.1.
With the VST3 version I am also getting hung notes and random crashes.
|
kotrance
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2015/04/23 11:13:42
- Status: offline
Re: Rapture Pro Issues
2015/05/01 19:21:54
(permalink)
Glad to hear I'm not the only one having issues. I hit up tech support the other day but still no response :(
|
p.a.wallis
Max Output Level: -90 dBFS
- Total Posts : 12
- Joined: 2015/04/05 13:39:31
- Status: offline
Re: Rapture Pro Issues
2015/05/02 13:36:16
(permalink)
Can confirm am also having issues detailed above in 32 and 64 bit versions in FL studio 11 and 12 with VST2 and VST3.(32 and 64 bit versions of Rapture Pro)
Further more having the same hanging notes issue in Plug and Mix Chainer running in Protools 10
In a positive Appears to run OK in Reaper 32 bit and can load Rapture pro and rewire Reaper into FL
Runs Fine in Cubase 5
|
weeman182
Max Output Level: -90 dBFS
- Total Posts : 19
- Joined: 2015/01/11 21:49:06
- Status: offline
Re: Rapture Pro Issues
2015/05/02 14:27:13
(permalink)
P.A have you tried this in loop mode?
|
p.a.wallis
Max Output Level: -90 dBFS
- Total Posts : 12
- Joined: 2015/04/05 13:39:31
- Status: offline
Re: Rapture Pro Issues
2015/05/03 01:40:34
(permalink)
Loading rapture pro into Reaper rewired into fl studio as a slave works fine looped in fl rapture loaded into reaper standalone and looped has the problems you describe.
Rapture pro loaded into fl mini host standalone is fine
Rapture pro loaded into mini host inside fl has the same problems as fl
|
weeman182
Max Output Level: -90 dBFS
- Total Posts : 19
- Joined: 2015/01/11 21:49:06
- Status: offline
Re: Rapture Pro Issues
2015/05/03 12:31:42
(permalink)
I imported the Rapture content into my original Rapture and have droped off the additional pro and dimension content until the VST is fixed. Long work arounds arnt for me :(
|
Re: Rapture Pro Issues
2015/05/04 16:02:31
(permalink)
☼ Best Answerby Dan Gonzalez [Cakewalk] 2015/05/05 11:48:05
Hi all,
We have observed this behavior while looping, and we are investigating it as we speak.
|
weeman182
Max Output Level: -90 dBFS
- Total Posts : 19
- Joined: 2015/01/11 21:49:06
- Status: offline
Re: Rapture Pro Issues
2015/05/05 15:36:39
(permalink)
Thanks Chris means alot to me
|
robywonkenobi
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2015/01/09 14:45:52
- Status: offline
Re: Rapture Pro Issues
2015/05/06 14:15:29
(permalink)
Having the note hanging issues in Ableton Live 9 as well. Mine plays randomly when no notes are present in the piano roll and when no keys are pressed on my Komplete Kontrol s25. This only happens some of the time, and continues to play the note even while playback is stopped. Sometimes it will stop playing the note when it comes to a section where there is midi information.
|
swamptooth
Max Output Level: -53 dBFS
- Total Posts : 2229
- Joined: 2012/04/16 15:44:21
- Status: offline
Re: Rapture Pro Issues
2015/05/06 15:37:33
(permalink)
DaveGlynn
I can confirm that both the 32bit and 64bit versions of the VST2 plugin do not show in Cubase Pro 8 on Windows 8.1.
With the VST3 version I am also getting hung notes and random crashes.
cubase by default hides vst2 versions of plugins when a vst3 version is found. if for some reason you want to use the vst2 version, rename the vst3 file extension to .vst3_ or something similar so cubase doesn't detect it.
Arvid H. PetersonSonar X3E Prod / X2A / X1PE | Cubase 9.5.1 | Reason 9.5 | Sibelius7 | Pure DataNative-Instruments Komplete 10 Ultimate and a smattering of other pluginsHome-brewed VSTs Toshiba Satellite S855-S5378 (16GB RAM, modified with 2x 750GB HDDs, Windows 8.1 x64) Samson Graphite 49, M-Audio Oxygen 49, Korg nanoPAD2, Webcam motion tracking programs M-Audio Fast Track UltraMember, ASCAP
|
p.a.wallis
Max Output Level: -90 dBFS
- Total Posts : 12
- Joined: 2015/04/05 13:39:31
- Status: offline
Re: Rapture Pro Issues
2015/05/07 03:26:28
(permalink)
☄ Helpfulby phased 2015/05/16 17:27:44
I have a break through of running Rapture Pro in FL12.
By switching fixed buffer size on in the wrapper it works as expected. Neither options in the more box are selected. I don't know what this means though
However there is a weird graphic issue on the VST3 after I come out of the wrapper processing settings the interface is all mixed up The elements / Mixer page appears where the browser should be then the interface (Plugin GUI) breaks up and crashes. (goes back to normal after reloading the plugin.)
|
kotrance
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2015/04/23 11:13:42
- Status: offline
Re: Rapture Pro Issues
2015/05/17 03:25:37
(permalink)
weeman182
I imported the Rapture content into my original Rapture and have droped off the additional pro and dimension content until the VST is fixed. Long work arounds arnt for me :(
Same here... Especially since the only difference with Rapture "Pro" is a macro page. There's nothing else separating the original Rapture to this Gui update they call pro. Same exact distortions, routing, and still no polyphonic portimento. I would have never updated to pro if i knew it was going to be an aesthetic makeover of the original.
|