Remote control Sonar using ipad

OK update on the installation
 
The set up takes several attempts so don't get discouraged.
 
First make sure you iPad is on
Next open "rtpMID"  and everything will be blank. The iPad name may appear in the directory name box, this is OK.
 
Setup in "rtpMID" 
 
1.  Click the + symbol under my sessions and the default computer name will appear with the same name displaying for Local name and Bonjour Name.
 
2.   Click the Enable button above the Local name and Bonjour name and rename the Local name to DAW or somethings similar change the Bonjour name to something short as well.  Now you will see the new name in My sessions, so click DAW or whatever you named it.
 
3.  in the bottom left hand corner, make sure the words "Only computers in my directory" is showing and close "rtpMID".
 
------------
 
4.  Download AC-7 to your iPad.
 
6.  Open "rtpMID" on your computer.
 
7.  See your iPad's name and click connect.
 
8.  Open  AC-7 in the iPad and click set up and select Sonar  You will see the name you created pop up on AC7 so click OK for all popups on the iPad.
 
9.  Now open Sonar click P on the key board on the DAW
 
10.  Click midi devices and click the in and out for the name you created for "rtpMID"
11.  Click midi control surface and select the yellow plus sign and select Mackie Control and add the  midi port names you created for the in and outs.
 
12.  Now in the Sonar Dock Control at the top, look for Controller and click the drop drop down box and select the Mackie Controller.
 
13.  Open a project or create anew project
 
14.  Press Rest on the iPad for AC-7 and watch the faders fly.
 
 
The first name in  RPTMidi will become the name of the MDI shown ports in Sonar
If you already have a hardware controller installed in Sonar you will have to select the last one created for the iPad to respond.  and hit reset.
 
Hit Reset in AC7 after every change made to a settings in rtpMID
 
I hope this helps you all.