GK Studios
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2011/03/20 14:06:55
- Status: offline
[Resolved] HELP!!! No Sound with M-Audio Uno & Yamaha Keyboard
I am using X1 Pro, and as my midi i am using the m-audio uno with a basic yamaha midi keyboard as interface. I do have a signal when I hit key but I cannot see or hear any activity in Sonar if I am not recording or during recording. I have done all I can and I need some outside help on this one. windows 7 4.0 gb Ram - Intel Cel E3400 @ 2.60 GHz
post edited by Willy Jones [Cakewalk] - 2011/10/06 09:52:32
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:HELP!!! No Sound
2011/03/20 14:47:16
(permalink)
Do you have the input echo button on the MIDI track enabled and a output selected?
Check that the channel you are outputting to is valid for that synth. For example a couple of my drum machines will only playback on channel 10.
Check your routing to an output on your interface if using soft synths. If it's a hardware synth make sure it is connected to something that enables you to hear playback and/or the volume is up.
|
HumbleNoise
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2004/01/04 12:53:50
- Status: offline
Re:HELP!!! No Sound
2011/03/20 14:57:43
(permalink)
Preferences>MIDI devices. Does your Uno show up there?
Local 'Off' for the Yamaha?
MIDI thru?
Reverse your MIDI cables on the UNO?
MIDI OMNI?
If the Yammie is being used as your MIDI interface then you're trying to play a soft synth? Correct?
Humbly Yours Larry Sonar X2 x64 MAudio 2496 Yamaha MG 12/4 Roland XV-88 Intel MB with Q6600 and 4 GB Ram NVidia 9800 GTX Windows 7 x64 Home Premium
|
Lanceindastudio
Max Output Level: -29 dBFS
- Total Posts : 4604
- Joined: 2004/01/22 02:28:30
- Status: offline
Re:HELP!!! No Sound
2011/03/20 15:00:13
(permalink)
inputs and outputs-
correct drivers selected-
onboard sound disabled in sonar
mid track output routed to the softsynth
softsynth output track routed to an output of your sound interface
Sometimes you need to change the midi channel on the midi track to one instead of omni to get the softsynth to sound-
Asus P8Z77-V LE PLUS Motherboard i7 3770k CPU 32 gigs RAM Presonus AudioBox iTwo Windows 10 64 bit, SONAR PLATINUM 64 bit Lots of plugins and softsynths and one shot samples, loops Gauge ECM-87, MCA SP-1, Alesis AM51 Presonus Eureka Mackie HR824's and matching subwoofer
|
HumbleNoise
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2004/01/04 12:53:50
- Status: offline
Re:HELP!!! No Sound
2011/03/20 15:06:55
(permalink)
Humbly Yours Larry Sonar X2 x64 MAudio 2496 Yamaha MG 12/4 Roland XV-88 Intel MB with Q6600 and 4 GB Ram NVidia 9800 GTX Windows 7 x64 Home Premium
|
GK Studios
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2011/03/20 14:06:55
- Status: offline
Re:HELP!!! No Sound
2011/03/20 15:45:06
(permalink)
ok, i did check and have the output correct. When I open up a new -> normal project, I see the signal default midi track. When I insert a synth, then I don't see a signal, nor do I hear what I am playing.
What do u think causes this?
|
GK Studios
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2011/03/20 14:06:55
- Status: offline
Re:HELP!!! No Sound
2011/03/20 15:58:48
(permalink)
Gentlemen I must admit that it was user error. I didn't have the wave preview on nor did I have the echo. Thank you for your time and thank you for all the great solutions. Drinks are on me (non-alcoholic bevs). CHEERS!
B-Nard
GK Studios
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:HELP!!! No Sound
2011/03/20 16:19:23
(permalink)
No worries, we all make mistakes and you got it sorted - that's a result
|
Lanceindastudio
Max Output Level: -29 dBFS
- Total Posts : 4604
- Joined: 2004/01/22 02:28:30
- Status: offline
Re:HELP!!! No Sound
2011/03/21 06:26:45
(permalink)
You should not need echo on to hear the sound, at least if you have a real sound interface. Echo (aka input monitoring) takes resourses up and causes latency on less than sufficient sound cards (aka on board sound). Glad you got some sound, but I do recommend getting a real sound interface that is know to perform decent when you get a chance. Here is a very good one that is very inexpensive, assuming you have a PCI slot (not PCI express) free to put this in: http://pro-audio.musiciansfriend.com/product/Echo-MIA-MIDI-Digital-Audio-and-MIDI-Card?sku=247016
Asus P8Z77-V LE PLUS Motherboard i7 3770k CPU 32 gigs RAM Presonus AudioBox iTwo Windows 10 64 bit, SONAR PLATINUM 64 bit Lots of plugins and softsynths and one shot samples, loops Gauge ECM-87, MCA SP-1, Alesis AM51 Presonus Eureka Mackie HR824's and matching subwoofer
|
Amber Inc
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2011/10/06 05:49:27
- Status: offline
Re:HELP!!! No Sound
2011/10/06 06:06:03
(permalink)
Hey Guys,
Another Newbie with a problem. I am running Win 7 Ultimate 64bit, 8G ram, I72600, Delta 66 with omni. Studio headphones. AT2020 Audio technica mic, separate midi interface.
I can't hear anything in sonar X1. I have reassigned the buses, drivers, inputs, outputs. I have downloaded all correct drivers, and even tried ASIO4All. It just says not connected. THis is an awsome sound card, why can't I hear anything?
What ticks me off the most is that I can even get audacity to run through my delta 66. I have read all the forums, and tried the echo on and off. Nothing......
Please help!!!!!!!
|
Lanceindastudio
Max Output Level: -29 dBFS
- Total Posts : 4604
- Joined: 2004/01/22 02:28:30
- Status: offline
Re:HELP!!! No Sound
2011/10/06 22:40:33
(permalink)
Does X1 see the delta?
What are you trying to play in sonar? A audio wav file? A Softsynth?
Asus P8Z77-V LE PLUS Motherboard i7 3770k CPU 32 gigs RAM Presonus AudioBox iTwo Windows 10 64 bit, SONAR PLATINUM 64 bit Lots of plugins and softsynths and one shot samples, loops Gauge ECM-87, MCA SP-1, Alesis AM51 Presonus Eureka Mackie HR824's and matching subwoofer
|
Lanceindastudio
Max Output Level: -29 dBFS
- Total Posts : 4604
- Joined: 2004/01/22 02:28:30
- Status: offline
Re:HELP!!! No Sound
2011/10/07 03:13:28
(permalink)
Solved it for amber in facebook chat - Another happy sonar noob with some sound now :)
Let the good times roll
Asus P8Z77-V LE PLUS Motherboard i7 3770k CPU 32 gigs RAM Presonus AudioBox iTwo Windows 10 64 bit, SONAR PLATINUM 64 bit Lots of plugins and softsynths and one shot samples, loops Gauge ECM-87, MCA SP-1, Alesis AM51 Presonus Eureka Mackie HR824's and matching subwoofer
|