[Resolved] Master Bus SILENT in Project

Help.  I'm stumped.  I've got a single project that will not allow sound to come from my master Bus.  It doesn't appear to be a hardware issue, as all other projects function fine.  If I route any busses or tracks directly to the audio output, they work fine.  It's when I route them to the master bus, and then route that master bus to the output that I have a problem.  I've even set up an entirely new bus, deleted the old master, and routed all busses and tracks to the new master.  Silence.  The VU meters on the master don't even light up.  All other VU's light up.  And again, if I switch the output to ANY of the busses or tracks to the hardware output, I get audio.  Sonar just doesn't want to recognize the master bus on this particular project.  Any ideas?

Also, if you have any plugins on your master buss, try disabling them.

Create a new bus and label it Master. Direct all the tracks to that Master and then direct the master to your sound card's 1/2 outs. Delete the old master bus
me,
CJ

Fruck tempates!! They where not made for your music. I have no clue why people use templates made by other people who never heard their music before and do not have access to your tracks. It boggles me!!!!

I started with Normal, but left that a long time ago.  I have several custom ones I built to suit my quirks and approaches, depending on what I am doing.
 
Bob Bone
 

Usually SONAR includes templates that have a Master bus defined. I am sure X3 did. When using a template that lacks a master bus either select one of the existing buses or create a new bus, right-click on the bus header and enable "Set as Default Bus"

 Once added all new tracks will have their output set to this bus. Existing tracks do not automatically pick up the bus.
 
BTW, next time consider creating a new thread. Usually a better idea than resurrecting an old unrelated thread.

.