zxczxc
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2009/11/24 00:48:36
- Status: offline
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
Re:Roland RPC-1 64 bit driver for Windows 7
2009/11/28 09:01:55
(permalink)
Does this driver support midi over RBUS? So an RPC-1 can stream audio and midi from and to an SI-24?
I was able to use the original latest drivers on the RBUS card by right clicking in SYSTEM and adding the driver manually. I did looze midi over RBUS though.
My system now holds two M-audio RBUS cards and one RPC-1
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
Re:Roland RPC-1 64 bit driver for Windows 7
2009/12/06 11:43:29
(permalink)
I tried above drivers and saw the same. You loose midi over RBUS. But I was able to use a latency of 64 samples. Wich is something not available in XP. As far as I am aware of.
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|
jeffj35290
Max Output Level: -90 dBFS
- Total Posts : 12
- Joined: 2005/01/02 00:05:13
- Status: offline
Re:Roland RPC-1 64 bit driver for Windows 7
2009/12/16 07:30:36
(permalink)
I tried it too. MIDI does not work, Also, my PC will no longer shutdown properly but that may or may-not be related to this driver.
Most concerning is that I found that Sonar would often hang. I then upgraded from Sonar 7 to Sonar 8.5 because that is the only version that officially supports Windows 7 but it still hangs often. I found that on some of my more complex songs (lots of tracks and lots of effects) that the sound would sometimes just not work under 64 bit Windows 7. Lots of quirks.
I downgraded to 32 bit Windows 7 using the same driver and it worked somewhat better.
I so wish that a high quality RBUS driver w/ MIDI support would be released. I love my Roland SI-24 but it seems like it's days are numbered.
|
webstar
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2009/12/22 17:13:41
- Location: Frankfurt/Main Germany
- Status: offline
I´ve got the same problem. Need help! Every time I´m going to work on a session I waste my time on fixing this problem. Is there any solution out there?
Excuse my english, but I´m from Germany :-).
THX
|
zxczxc
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2009/11/24 00:48:36
- Status: offline
What version of the chip ROM do you have?
You need at least to have ver. "RPC-1A03" , the original ROM "RPC-1A02" is defective.
Call Roland for the replacement
PARTS
"#02899067 -------------- IC SERIAL ROM XC17S30XLPD8C (RPC-1A03)
The driver has been tested with Windows 7 Ultimate and two RPC-1 boards connected to two VS-2480 workstations and it works well.
The limitations in the MIDI side are inherent to the design of the RPC-1 , it only supports realtime system common messages (less SysEx).
|
Seth Kellogg [Cakewalk]
Administrator
- Total Posts : 814
- Joined: 2009/02/06 15:25:40
- Location: Boston, MA
- Status: offline
Wow zxczxc!
I use two RPC-1 cards at home with some Edirol DA-2496 rack units. I thought they were gonna be paperweights!
If I get the time to reformat my home PC to Win7. I'll chime in here with what I get with S8.5.2
Gotta check those ROM numbers too.
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
How can we check what version of rom is inside?
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|
COQUITO
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2009/12/06 11:28:09
- Status: offline
Hi Guys, My Win7 64bit machine hangs also during shutdown. Is there a newer driver available? and whats best: WDM or ASIO? thanks in advance
post edited by COQUITO - 2010/10/21 09:57:04
|
Rylan
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2010/11/30 18:33:26
- Status: offline
I was trying to find this as the download links are broken here, but was able to find the file, so if anyone else is looking for this I found it here:
Thanks for the driver!
|
HoHo
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2010/09/14 16:49:41
- Location: Tracy, California, USA
- Status: offline
I have a fix for the shutdown problem. I am using RPC-1 card on my Windows 7 32-bit and 64-bit PCs. Both work very well except the PCs hang during shutdown. I found this fix on the web. There are 2 Windows services that is causing the problem. Need to force the 2 services to stop before shutdown using the following batch file. 1) Create a batch file named "AudioStop.bat" using a text editor (notepad will work) 2) Right Click on newly created .bat file >"edit" and enter following 2 lines: net stop "Audiosrv" net stop "AudioEndpointBuilder" 3) Save file as "AudioStop.bat" in directory c:\ProgramData\ 4) Open "run" from start menu and enter "gpedit.msc" (without quotes) and hit "OK" 5) Now navigate on left pane of window "Computer Configuration" > "Windows Settings" > "Scripts (Startup/Shutdown)" 6) On right pane of window, double click on "Shutdown" 7) From window that opens, Click "Add" then browse to where you saved "AudioStop.bat" earlier and double click on it 8) Hit "Apply" and close. You are done  Window7 will now Automatically stop the Audio services when Shutting Down or Restarting allowing system to complete the process.
post edited by HoHo - 2010/12/17 19:28:19
|
Vinnydude
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2011/02/18 09:36:23
- Status: offline
I was thrilled to pieces when i found out I can still use my Edirol DA2496 with the roland card :D
So I went out and bought myself a copy of windows 7.
All was awesome until I came to shutdown and it didn't. So 'no worries' I thought, just follow the instructions above.
But no.
I got Windows 7 Home Premium Didn't I, which doesn't come with GPEdit. I'm far from impressed.
So, does anyone know a work around without using GPedit?
|
Seth Kellogg [Cakewalk]
Administrator
- Total Posts : 814
- Joined: 2009/02/06 15:25:40
- Location: Boston, MA
- Status: offline
You can check the ROM version on the card itself. On my card it has 2 Eproms. One is a B revision ROM and the other is an A revision. But, it seems to work okay?
What are the main defective things that I can check?
I'll try the script tonight as I am having the hang on shutdown problem as well.
|
Number Six
Max Output Level: -90 dBFS
- Total Posts : 2
- Joined: 2011/02/20 18:53:41
- Location: Milano, Italy
- Status: offline
I'm new to this forum, and thank God I found this thread. I was pushed to upgrade Windows, since Premiere Pro C.S. 5 only runs on a 64 bit system. I thought my trusted Edirol DA-2496 was useless until 10 minutes ago  and I need this card for audio editing (Nuendo) on my video production. My DAW is based on a old AMD Athlon X64 4400, Nforce4 chipset and the O.S. is Windows 7 Ultimate 64 bit. So far so good (I'll check later for the shutdown issue), but the MIDI port is not available. Does anyone know if there's a solution for that? Any help would be higly appreciated. Thanks again, and sorry for my english ... I am from Italy.
|
Seth Kellogg [Cakewalk]
Administrator
- Total Posts : 814
- Joined: 2009/02/06 15:25:40
- Location: Boston, MA
- Status: offline
The RPC-1 cards can't send MIDI in 64-bit. That's just how it is AFAIK.
The script above didn't work on my system as I have a Creative card as well. I created 2 batch files to disable the RPC-1 via command on boot/shutdown. I had to grab a amd64 devcon.exe from the MS Win7 Driver SDK as it isn't on their site. ia64 and x86 are available on the Microsoft site though.
I'll try to give you guys a write up later this week on what I personally did.
|
Number Six
Max Output Level: -90 dBFS
- Total Posts : 2
- Joined: 2011/02/20 18:53:41
- Location: Milano, Italy
- Status: offline
Thanks for sharing your experiences Seth.
I am currently having some trouble (pops) with Cubse 5, but I do believe that this particular issue is related to the fact that my system need to be formatted.
The script works just fine for me.
Thanks again.
|
Rylan
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2010/11/30 18:33:26
- Status: offline
I am also on Windows 7 64 bit Ultimate, can't get the driver to work... I see the RPC-1 under my device manager and it says it needs a driver but when I try to install the driver listed here I point it to the folder I unzipped with the contents and it says it can't find a suitable driver. I am at a loss as to why it works for you guys and not me.. I so want to use my DA-2496!!!
Sigh...
|
Seth Kellogg [Cakewalk]
Administrator
- Total Posts : 814
- Joined: 2009/02/06 15:25:40
- Location: Boston, MA
- Status: offline
Rylan
I am also on Windows 7 64 bit Ultimate, can't get the driver to work... I see the RPC-1 under my device manager and it says it needs a driver but when I try to install the driver listed here I point it to the folder I unzipped with the contents and it says it can't find a suitable driver. I am at a loss as to why it works for you guys and not me.. I so want to use my DA-2496!!!
Sigh...
These drivers will only work with the Roland RPC-1 boards. They will not work with the Edirol DA-2496 card. I just used the DA2496 Rack Units with the RPC-1 Card.
|
Rylan
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2010/11/30 18:33:26
- Status: offline
Oops! My mistake, I am looking at my Edirol DA-PCI card and it looks quite similar to the RPC-1, I was mixed up and thought I had an RPC-1 silly me no wonder it didn't work. So if I get an RPC-1 I can use my da-2496 with my 64 bit windows 7? If that's the case I will start looking for one for sale, seems like it won't be easy though. I assume this driver includes some sort of mixer and digital patchbay? Or will it just show up under my Windows mixer? Also were you able to get the full 8x8 at 24/96? Sorry to ask so many questions, I just really love my Edirol and want to keep using it. Thank you to everyone here, this thread might be saving me from having to buy a new interface, I really hope! I'm also going to try calling M-Audio as someone else had done to ask if they might have any ideas for me to use their drivers for my DA-PCI. Probably not though.
post edited by Rylan - 2011/03/10 15:11:11
|
rocket
Max Output Level: -89 dBFS
- Total Posts : 88
- Joined: 2006/02/04 14:49:06
- Status: offline
I have two RPC-1 cards running on win7 x64. I'm only able to use the WDM driver. Is anyone using the ASIO driver? If so, any suggestions on how to get it to work on my system?
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
There is a new Delta driver out with version 5.10.0.5076
Too bad it won't completely install on my RPC-1. Maybe I can try my Delta RBUS.... Can't extract the driver from the executable...
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|
walker911
Max Output Level: -90 dBFS
- Total Posts : 2
- Joined: 2011/06/27 22:17:35
- Status: offline
great post。 thanks for sharing...
post edited by Seth Kellogg [Cakewalk] - 2011/06/28 12:42:43
|
Phoenix57775
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2011/07/20 02:47:03
- Status: offline
Not sure how active this thread is anymore, but I figured I give this a try. I have a SI-24 with a RPC-1 card that I'm trying to get working with Sonar 7. I have installed the 64 bit RPC drivers and everything seems to be fine there. I can even play back audio through the SI-24 once inside of Sonar. However the control surface is not operational. I installed the control surface driver that I used previously with Sonar 3 for the SI-24 in hopes that it would work, but so far no luck. Is there another driver I need to get things operational or am I just missing something. By the way I am running all this on Windows 7 Ultimate 64 bit, and have tried with both 32 and 64 bit versions of Sonar 7..... Please Help!
|
Jeremi
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2011/07/30 03:50:51
- Status: offline
If you have some driver to RPC-1 win7 64bit please contact me! Till now i was work at win xp.
|
Jihad Baracus
Max Output Level: -90 dBFS
- Total Posts : 2
- Joined: 2012/02/05 08:20:11
- Status: offline
Re:Roland RPC-1 64 bit driver for Windows 7
2012/02/20 18:38:11
(permalink)
All the links are dead can some one send me the drivers or tell me where to find them?
|
Titi_du_44
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2012/03/03 05:57:45
- Status: offline
Re:Roland RPC-1 64 bit driver for Windows 7
2012/03/03 06:01:24
(permalink)
Hi,
Does someone could re_up the 64bits RPC-1 drivers ? I can't find them anywhere on the net. All links are dead.
Best regards
|
Suzi
Max Output Level: -90 dBFS
- Total Posts : 39
- Joined: 2005/06/06 06:09:59
- Location: Germany
- Status: offline
... von Windows verweht ...
|
For example John
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2012/08/10 10:46:35
- Status: offline
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
I was able to upgrade my RPC-1 card to the latest M-audio 6.0.8 driver. This driver also supports a multi card system...
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|