clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
S-Gear "The Jackal Dirty" patch
The Jackal! I like this amp. I've been experimenting and trying to dial in a sound close to what I get with Sonar and my Favorite plugins. Post one has a dry preset, and post two has the same preset refined with FX and a 9ms delay to the left speaker. I'm struggling a bit with the reverb. I'm playing to quiet to hear it properly. I'll tweak it more later. http://www.scuffhamamps.com/forum/9-presets/7477-a-nice-jackal-preset
post edited by clintmartin - 2015/10/26 21:03:42
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/24 21:30:43
(permalink)
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/24 21:46:10
(permalink)
Let me know what you think. I know you'll have to tweak it to your guitar, but I would like to see what you change.
|
ohgrant
Max Output Level: -35.5 dBFS
- Total Posts : 3966
- Joined: 2007/03/27 22:53:01
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 10:11:25
(permalink)
Thanks Clint, I'll check it out.
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 16:59:36
(permalink)
The presets are great Clint...even with my EMG 81/85's...
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 17:23:40
(permalink)
cclarry
The presets are great Clint...even with my EMG 81/85's...
I have a Seymour Duncan Hotrails in the bridge of my Strat...so I can see were that could work. Did you find it to be too dark or bright?
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 17:26:04
(permalink)
Neither...it was pretty well balanced...
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 17:44:29
(permalink)
Excellent! Good news. Hopefully more people will share some presets. I always find it interesting. The Pro convolver has a lot of tweak-ability.
|
Jimbo21
Max Output Level: -77 dBFS
- Total Posts : 696
- Joined: 2010/02/08 19:35:48
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 19:12:51
(permalink)
I appreciate the preset Clint! I'm primarily a bassist, so guitar is a bit of a different animal for me. I'm not exactly a tone monster, though I can get around the fret board pretty well. I pretty much only use amp sims (S-gear and Creme) so any good presets are welcome!
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/25 21:36:52
(permalink)
Well I thought it sounded good...so I hope a few people like it. I'll add a clean Fender-ish preset soon.
|
ohgrant
Max Output Level: -35.5 dBFS
- Total Posts : 3966
- Joined: 2007/03/27 22:53:01
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/26 16:41:56
(permalink)
Nice biting tone on both those. Cool delay, again sounded great on both guitars.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/26 17:57:18
(permalink)
 Glad to hear it!
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/26 20:52:49
(permalink)
☄ Helpfulby ohgrant 2015/10/26 21:36:54
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/27 08:26:43
(permalink)
Since you've been speaking so highly of S-Gear (as well as a lot of others in here), I'm going to start saving up for this package.......although I still have PF Platinum, A3 & soon A4, and GR5.......it's like drums, you just can't have enough rooooight?  How does this compare to BIAS FX?
post edited by Mesh - 2015/10/27 08:37:11
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/27 10:10:11
(permalink)
Mesh
Since you've been speaking so highly of S-Gear (as well as a lot of others in here), I'm going to start saving up for this package.......although I still have PF Platinum, A3 & soon A4, and GR5.......it's like drums, you just can't have enough rooooight?
How does this compare to BIAS FX?
Can't have enough is right!!! You'll have to ask Larry about Bias, I don't have that one.
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/27 10:13:28
(permalink)
Bias and S-Gear are running neck and neck for me right now...
I like the FX in S-Gear slightly more for "lushness"...
We'll see if A4 lives up to the Hype - r realism it claims and dethrones
them...
|
Richard Cranium
Max Output Level: -81 dBFS
- Total Posts : 474
- Joined: 2015/09/19 06:55:34
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/28 03:19:43
(permalink)
For me BIAS FX is a hole 'nother level to S-Gear 2, I haven't touched S-Gear 2 since getting BIAS Amp Pro and then BIAS FX Pro when they came out, I would also through TH2 Full above S Gear, when you spend enough time understanding how it works, how to get the most out of it, it really is a gem as a lot of folk have found. I have always been able to get better sounds (to my ears) easily out of TH2 than S-Gear 2, plus TH2 has the works, almost everything you could desire, and all top quality. While good, I have always felt S Gear 2 to be over rated, I tried using it quite a few times after my initial 'WoW' when I first heard it, used it, but not once kept it in the mix, always replacing it with TH2, and now BIAS Amp/FX as well. IMO you would be crazy not to get BIAS FX and put it through it's paces for as long as it allows before committing to purchase any other amp sim. Oh, and for all your distortion needs, don't forget 'BIAS Pedal' is being released tomorrow, I have been using this for a while as part of the explorer program, AWESOME, again you will need to learn/understand it to get the maximum, but straight out of the gate it is pretty inspiring As with everything, this is just my opinion, and it all depends on your 'bent', what you are into bla bla bla, so YMMV
post edited by Richard Cranium - 2015/10/28 03:30:36
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/28 08:09:01
(permalink)
I like several of the amp sims to be honest, but I can't afford to have them all. I decided to keep and maintain my favorite two. S-Gear and Amplitube.
|
michaelhanson
Max Output Level: -40 dBFS
- Total Posts : 3529
- Joined: 2008/10/31 15:19:56
- Location: Mesquite, Texas
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/28 20:16:42
(permalink)
Down loaded. I will give this a try soon.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/28 21:10:09
(permalink)
michaelhanson
Down loaded. I will give this a try soon.
Try "The Duke Clean" patch too Michael. It's further down in this forum. I like it with my Strat in the neck position.
|
michaelhanson
Max Output Level: -40 dBFS
- Total Posts : 3529
- Joined: 2008/10/31 15:19:56
- Location: Mesquite, Texas
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/28 23:00:45
(permalink)
I grabbed it. I just got a new Am. Strat that I will try it out on.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/29 00:00:44
(permalink)
Feel free to say what you don't like about these patches...
If you improve it, I want it!
|
michaelhanson
Max Output Level: -40 dBFS
- Total Posts : 3529
- Joined: 2008/10/31 15:19:56
- Location: Mesquite, Texas
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/29 09:10:06
(permalink)
The patch sounded really good Clint. The only change I made to fit the song that I plugged it into was to raise the gain a little bit and raise the bass just a little bit.
post edited by michaelhanson - 2015/10/29 09:23:47
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/29 10:15:11
(permalink)
michaelhanson
The patch sounded really good Clint. The only change I made to fit the song that I plugged it into was to raise the gain a little bit and raise the bass just a little bit.
Is that on the Jackal or Duke patch? Mt Strat has a Seymour Duncan Hotrails in the bridge...so it has a bit more grunt than a single coil. I'm still fighting with the reverb a bit. One uses the 'Hall' and one uses the 'spring'.
|
michaelhanson
Max Output Level: -40 dBFS
- Total Posts : 3529
- Joined: 2008/10/31 15:19:56
- Location: Mesquite, Texas
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/29 13:27:12
(permalink)
Jackal with my Epi Dot, Gibson Classic 57 pickup, bridge pickup.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/29 17:30:04
(permalink)
Well, those should out-grunt my Strat. Hahaha!
|
cecelius2
Max Output Level: -61 dBFS
- Total Posts : 1494
- Joined: 2009/11/06 16:12:11
- Location: Pacific Northwest
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/30 16:30:05
(permalink)
clintmartin
Well, those should out-grunt my Strat. Hahaha!
Just tried both your Jackal and Duke patches; thanks for all four of them. They sound very nice. Have only tried them with my 4-way Telecaster with Bill Laurence (Wilde) L200/L202 NF singles. Your Duke is very responsive to the four different pickup selections. These will be keepers. Thanks.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Here's a S-Gear preset I've been working on today.
2015/10/30 18:22:54
(permalink)
cecelius2
clintmartin
Well, those should out-grunt my Strat. Hahaha!
Just tried both your Jackal and Duke patches; thanks for all four of them. They sound very nice. Have only tried them with my 4-way Telecaster with Bill Laurence (Wilde) L200/L202 NF singles. Your Duke is very responsive to the four different pickup selections. These will be keepers. Thanks.
Thanks! That kind of makes my day.
|