Answered[SOLVED] How to avoid Pre-Fader to bypass Solo, Mute, etc?

Author
Post
Essentials Only Full Version
rogeriodec
Max Output Level: -75 dBFS
  • Total Posts : 753
  • Joined: 2004/04/09 13:55:04
  • Location: Brazil
  • Status: offline
2016/10/25 21:11:58 (permalink)

[SOLVED] How to avoid Pre-Fader to bypass Solo, Mute, etc?

I have one bus to use as Impulse Reverb.
In my track I set a Send to this reverb bus and the output to the master bus.
To simulate a distance between the instrument and microphone on a stage, I enable to Pre-fader of this send and I lower the volume of the track. This causes only the master volume lower, but keeps the reverb volume. The result works well.

But the problem is that when I put any other track in solo, this will not solo my track with the pre-fader.
This way I am always forced to manually activate the post-fader of this track to be able to hear the solo the other track.
I wonder if there is any way to avoid this?
post edited by rogeriodec - 2016/10/26 11:55:32

rogeriodec.com.br


* Cakewalk By Bandlabs (always lastest versions), Window 10 x64
* Focusrite Scarlett Solo Audio Interface
* Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
* 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
* Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
* 3 LCD Monitors
* Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
#1
See best answer

2 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: How to avoid Pre-Fader to bypass Solo, Mute, etc? 2016/10/26 10:21:47 (permalink) ☼ Best Answerby rogeriodec 2016/10/26 11:55:09
    rogeriodec
    But the problem is that when I put any other track in solo, this will not solo my track with the pre-fader.



    Assuming you meant to say 'will not mute the pre-fader send on the other track', you can change this by setting LinkPFSendMute=1 in AUD.INI (Edit > Preferences > Audio > Configuration File > Edit Config File).
     
    This causes pre-fader sends to be muted when the track is muted - either directly or because some other track is soloed.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    rogeriodec
    Max Output Level: -75 dBFS
    • Total Posts : 753
    • Joined: 2004/04/09 13:55:04
    • Location: Brazil
    • Status: offline
    Re: How to avoid Pre-Fader to bypass Solo, Mute, etc? 2016/10/26 11:56:51 (permalink)
    Holy Genius! 
    Thank you again!

    rogeriodec.com.br


    * Cakewalk By Bandlabs (always lastest versions), Window 10 x64
    * Focusrite Scarlett Solo Audio Interface
    * Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
    * 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
    * Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
    * 3 LCD Monitors
    * Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1