SONAR 8.5 / EDIROL PCR-500 - WON'T RECORD MIDI CONTROLLER DATA

Author
GoPo
Max Output Level: -90 dBFS
  • Total Posts : 8
  • Joined: 2012/07/27 19:42:26
  • Location: middle of mississippi
  • Status: offline
2012/08/02 15:27:01 (permalink)

SONAR 8.5 / EDIROL PCR-500 - WON'T RECORD MIDI CONTROLLER DATA

i must be missing something simple... REASON works great with the PCR500 - no problem it works great with SONAR 8.5 - it integrates well & i can call up the right d-map for each synth plug-in & hear all the changes i make with the knobs & sliders but it WON'T RECORD the controller changes - only MIDI note/Pitchbend & mod data i hooked up a PCR-M50 & SONAR records the controller data i hooked up an M-audio Radium & it works what gives?? i have all the right boxes checked & enabled i can't seem to locate any presets for the PCR-500 either
#1

4 Replies Related Threads

    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re:SONAR 8.5 / EDIROL PCR-500 - WON'T RECORD MIDI CONTROLLER DATA 2012/08/02 15:44:40 (permalink)
    Symptoms point to PCR-500 not sending controller data from anything other than the Mod wheel. This probably belongs in the Hardware subforum.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    GoPo
    Max Output Level: -90 dBFS
    • Total Posts : 8
    • Joined: 2012/07/27 19:42:26
    • Location: middle of mississippi
    • Status: offline
    Re:SONAR 8.5 / EDIROL PCR-500 - WON'T RECORD MIDI CONTROLLER DATA 2012/08/02 17:59:03 (permalink)
    the PCR sends controller data to REASON fine & i can record my filter sweeps/etc. no problem... it sends controller data to SONAR synths no problem - SONAR just won't RECORD the data it seems to be a SONAR thing - i upgraded to X1 & it's the same problem...
    #3
    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re:SONAR 8.5 / EDIROL PCR-500 - WON'T RECORD MIDI CONTROLLER DATA 2012/08/02 19:23:24 (permalink)
    Well if your using X1 you might get a better answer in the X1 forum, this is for the older abandoned versions. I don't know where things are in X1 but there is the MIDI options dialog which has toggles etc for controller data, but sounds like you are beyond that.

    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #4
    Chregg
    Max Output Level: -51.5 dBFS
    • Total Posts : 2382
    • Joined: 2010/02/22 06:14:27
    • Location: Perth, Scotland
    • Status: offline
    Re:SONAR 8.5 / EDIROL PCR-500 - WON'T RECORD MIDI CONTROLLER DATA 2012/08/03 05:00:49 (permalink)
    this is wat im asking for, is being able to assign macro ctrls to envelopes ive created to control reason parameters, you can create evelopes in sonar that control reason parameters, by going to the edit filter and sending midi cc out to reason, you need to use reasons midi implemetation chart
    #5
    Jump to:
    © 2025 APG vNext Commercial Version 5.1