johnnyV
Max Output Level: -48.5 dBFS
- Total Posts : 2677
- Joined: 2010/02/22 11:46:33
- Location: Here, in my chair
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/07 12:12:49
(permalink)
I go and buy this huge case and now I'll be filling it with 3 little tiny SSD drives! They will look so small in there! The case is made to hold 3 SSD, 4 SATA and 4 DVD drives.
Today I unplug from the internet and install to the studio. All seems working fine except it makes one small beep on boot up? Can't find any info about what one beep means. The BIOS LED shows AO which says in manual it's initiating IDE? There is no IDE connection on the MOBO.
Sonar X3e Studio - Waiting for Professional Scarlett 6i6Yamaha Gear= 01v - NSM 10 - DTX 400 - MG82cx Roland Gear= A 49- GR 50 - TR 505 - Boss pedalsTascam Gear= DR 40 - US1641 -Mackie Gear= Mix 8 - SRM 350's i5 Z97 3.2GHZ quad 16 Gig RAM W 8.1 home buildTaylor mini GS - G& L Tribute Tele - 72 Fender Princeton - TC BH 250 - Mooer and Outlaw Pedals Korg 05/RW
|
johnnyV
Max Output Level: -48.5 dBFS
- Total Posts : 2677
- Joined: 2010/02/22 11:46:33
- Location: Here, in my chair
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/07 12:53:22
(permalink)
The big case! Look at the tiny little SSD drive,, I've since the picture added my 2 Sata hard drives in the bay above. There's a little bay for SSD drives at the bottom but I used the adapter they included to give more room for air flow. You can see the BIOS LED --AO. The manual for the Gigabyte MOBO is not very forthcoming with info. I guess they assume you actually know what your doing. There are a lot of tiny wires to hook up etc and it takes a bit of head scratching to figure this all out. I've actually never fully assembled a computer from the ground up. Mostly just re builds and swapping parts. About $800 including the OS. Could have shaved a few bucks off if the sales where better. 
Sonar X3e Studio - Waiting for Professional Scarlett 6i6Yamaha Gear= 01v - NSM 10 - DTX 400 - MG82cx Roland Gear= A 49- GR 50 - TR 505 - Boss pedalsTascam Gear= DR 40 - US1641 -Mackie Gear= Mix 8 - SRM 350's i5 Z97 3.2GHZ quad 16 Gig RAM W 8.1 home buildTaylor mini GS - G& L Tribute Tele - 72 Fender Princeton - TC BH 250 - Mooer and Outlaw Pedals Korg 05/RW
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/07 14:10:26
(permalink)
Thanks Jim,
Off to run the de-bug now.
"I've got a Samsung 840 EVO "Samples" drive that's over 90% full...
Sustains 500+MB/Sec on reads."
This is after the de-bug or without the de-bug?
Tom
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
Jim Roseberry
Max Output Level: 0 dBFS
- Total Posts : 9871
- Joined: 2004/03/23 11:34:51
- Location: Ohio
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/07 14:16:59
(permalink)
DeeringAmps
"I've got a Samsung 840 EVO "Samples" drive that's over 90% full...
Sustains 500+MB/Sec on reads."
This is after the de-bug or without the de-bug?
Hi Tom, Both before and after... 
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/08 09:36:14
(permalink)
Everything went just fine!
Did have an "oh sh*t" moment when the computer re-booted and the software couldn't "find" the EVO.
Re-booted again and all went well.
500gb drive, 80% full, took just under 2 hours for the whole process.
Thanks for your help Jim, you're the best!
So this begs the question; is SSD a "mature" platform.
I took from early conversations that we should NOT defrag, overwrite, etc.
Basically write once (hence the sample drive), and leave it alone.
Or is it just the MLC technology used to lower the price the thing to avoid?
My mom always said; "don't pay much, don't get much"...
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/08 22:54:55
(permalink)
johnnyV
The big case!...
A big case is always good because it allows better air circulation. But that PSU looks like its internal fan is right up against the bottom of the case. If so, that might be a problem.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
rtucker55
Max Output Level: -53.5 dBFS
- Total Posts : 2177
- Joined: 2005/06/20 21:11:47
- Location: Hope, Indiana
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/08 23:01:36
(permalink)
I went through the process for an evo 1TB. It did take a few hours but was successful.
Just curious, is there any point in leaving the performance restoration program installed on my machine now that I am finished with the process?
Purrrfect Audio DAW here. Wow!...
|
johnnyV
Max Output Level: -48.5 dBFS
- Total Posts : 2677
- Joined: 2010/02/22 11:46:33
- Location: Here, in my chair
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/09 22:46:46
(permalink)
Well it's a firmware tool, so on the off chance they release another firmware update? It does no harm being there really. But you probably right it will never be used again for a bug fix one would hope. Make me think the next drive will be a Toshiba or ?
Sonar X3e Studio - Waiting for Professional Scarlett 6i6Yamaha Gear= 01v - NSM 10 - DTX 400 - MG82cx Roland Gear= A 49- GR 50 - TR 505 - Boss pedalsTascam Gear= DR 40 - US1641 -Mackie Gear= Mix 8 - SRM 350's i5 Z97 3.2GHZ quad 16 Gig RAM W 8.1 home buildTaylor mini GS - G& L Tribute Tele - 72 Fender Princeton - TC BH 250 - Mooer and Outlaw Pedals Korg 05/RW
|
johnkeel
Max Output Level: -89 dBFS
- Total Posts : 56
- Joined: 2014/10/20 20:26:32
- Location: Portugal
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/10 05:37:02
(permalink)
Did johnnyV
Well it's a firmware tool, so on the off chance they release another firmware update? It does no harm being there really. But you probably right it will never be used again for a bug fix one would hope. Make me think the next drive will be a Toshiba or ?
I was under the impression that it was a FIX only tool. Not an actually firmware update, since those you do using Samsung SSD Magician (an actually really good tool). Still wish other brands would release fixes and firmware updates, half of them do nothing, i keep my opinion about Samsung SSD, no other brand can touch them ;)
My Personal Website | My Band - SULLEN
Sonar Professional powered by Custom-Built Laptop with Xeon E5 2650V2 - 32GB 1600Mhz Memory - 2x SSD 512GB Samsung 840PRO RAID0 - Texas Inst. Firewire800 - RME Fireface802
|
johnkeel
Max Output Level: -89 dBFS
- Total Posts : 56
- Joined: 2014/10/20 20:26:32
- Location: Portugal
- Status: offline
Re: SSD drive question for Sonar DAWs
2014/11/10 05:37:06
(permalink)
double post!
please delete.
My Personal Website | My Band - SULLEN
Sonar Professional powered by Custom-Built Laptop with Xeon E5 2650V2 - 32GB 1600Mhz Memory - 2x SSD 512GB Samsung 840PRO RAID0 - Texas Inst. Firewire800 - RME Fireface802
|