Saving changes with remote control knobs

Author
Post
Essentials Only Full Version
edpdx
Max Output Level: -90 dBFS
  • Total Posts : 33
  • Joined: 2010/03/25 14:53:18
  • Status: offline
2010/08/05 17:25:01 (permalink)

Saving changes with remote control knobs


Can anyone help me? I have used 'remote control' to control the master volume with my NanoKontrol, but when I save the setting under, Synth Rack and ACT midi controler and try calling those settings next time, I open the project, it does not work.


Please help!
#1

9 Replies Related Threads
    Fog
    Max Output Level: 0 dBFS
    • Total Posts : 12302
    • Joined: 2008/02/27 21:53:35
    • Location: UK
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/05 17:38:34 (permalink)
    are your  using automation read/write ? maybe thats your problem.. top right corner , see the R and W

    also maybe your zero'ing controllers... just a thought

    #2
    jasonthurley
    Max Output Level: -85 dBFS
    • Total Posts : 264
    • Joined: 2010/07/22 15:57:06
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/05 17:42:19 (permalink)
    It sounds like you need a MIDI command to reset to that default that is not happening....I think there is an option to send MIDI data to your synth in the menu somewhere but I can't touch this one without being hands on or in front of Sonar
    #3
    edpdx
    Max Output Level: -90 dBFS
    • Total Posts : 33
    • Joined: 2010/03/25 14:53:18
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/05 17:49:04 (permalink)
    I tried automation red/write and it did not work. What do you mean by 'zero'ing', I am not familiar with that.

    Thanks for replying

    edpdx
    #4
    lorneyb2
    Max Output Level: -58.5 dBFS
    • Total Posts : 1667
    • Joined: 2007/04/26 04:02:10
    • Location: Saskatchewan, Canada
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/05 17:55:08 (permalink)
    In Options - Project - Mdi Out - uncheck the Zero controllers when play stops box.  That should allow it to retain the last setting you used in the session for at least that session.   Don't know if  it will retain it for reopening the project though.
     
    #5
    edpdx
    Max Output Level: -90 dBFS
    • Total Posts : 33
    • Joined: 2010/03/25 14:53:18
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/05 17:56:35 (permalink)
    I can save any information only when, I use the 'midi learn' option and, I press the cell and knob. But when I use 'remote' it does actually turn the proper knob but, I cannot retrieve that single knob, next time that, I open the project

    edpdx
    #6
    jasonthurley
    Max Output Level: -85 dBFS
    • Total Posts : 264
    • Joined: 2010/07/22 15:57:06
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/05 17:59:30 (permalink)
    There is an option under MIDI (I think) that you can check(or not) to reset controllers/synths to there default settings when your project goes to 0 in time (or start of project)... if this is checked it will default the synth/controller settings to factory (I believe it's factory default or other default)
    #7
    edpdx
    Max Output Level: -90 dBFS
    • Total Posts : 33
    • Joined: 2010/03/25 14:53:18
    • Status: offline
    Re:Saving changes with remote control knobs 2010/08/06 00:08:55 (permalink)
    I tried selecting and deselecting the controllers option without success, like Jason had recommended
    #8
    kenschr36
    Max Output Level: -90 dBFS
    • Total Posts : 34
    • Joined: 2005/06/08 10:57:03
    • Location: Massachusetts, USA
    • Status: offline
    Re:Saving changes with remote control knobs 2011/01/07 22:19:52 (permalink)
    I have the same problem. It seems like such a basic function; remember my MIDI parameters bindings for my soft-synths.  The remote control binding set for the channel strips are saved; but not the soft-synth parameters.  This seems to be the case for all soft-synths.
    #9
    kenschr36
    Max Output Level: -90 dBFS
    • Total Posts : 34
    • Joined: 2005/06/08 10:57:03
    • Location: Massachusetts, USA
    • Status: offline
    Re:Saving changes with remote control knobs 2011/01/30 18:30:23 (permalink)
    bump.  Does anyone have any ideas on this?  Sonar Producer 8.  I can't make the remote control settings for soft synth parameters to be remembered after I re-load a project.
    #10
    Jump to:
    © 2024 APG vNext Commercial Version 5.1