[Solved] "End of project" is ridiculously way far out beyond actual end

Author
Post
Essentials Only Full Version
dougalex
Max Output Level: -86 dBFS
  • Total Posts : 244
  • Joined: 2003/11/18 14:22:24
  • Status: offline
2015/08/08 11:48:53 (permalink)

[Solved] "End of project" is ridiculously way far out beyond actual end

"End of project" is ridiculously way far out beyond actual last event
 
I "deleted hole" checked boxes for all event types
Saved project and reopened.
Event view shows nothing out there.
 
But still... pressing "Control-End" goes way out there.
Any suggestions?
#1

11 Replies Related Threads
    jsg
    Max Output Level: -69 dBFS
    • Total Posts : 1079
    • Joined: 2003/11/20 04:54:18
    • Location: San Francisco, California
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 15:00:25 (permalink)
    dougalex
    "End of project" is ridiculously way far out beyond actual last event
     
    I "deleted hole" checked boxes for all event types
    Saved project and reopened.
    Event view shows nothing out there.
     
    But still... pressing "Control-End" goes way out there.
    Any suggestions?


    Try "Apply Trimming" and "Bounce to Clips".
     
    Also, check your event list to make sure there are no events of any kind past the end of your piece.
     
    JG
    www.jerrygerber.com
    #2
    Kalle Rantaaho
    Max Output Level: -5 dBFS
    • Total Posts : 7005
    • Joined: 2006/01/09 13:07:59
    • Location: Finland
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 16:09:31 (permalink)
    Various forms of problems with project ending are being discussed regularly.
    I think I noticed something funny yesterday. I've had many inexplicable cases when a project suddenly "forgets" its ending and plays back forever even though there are no events after the last clips. Like the one I worked on yesterday. If I "Go to" project end, it goes to the right place, the end of the last clip, but if I play it back it goes on forever.
     
    Accidentally I noticed that this seems to occur when I archive a track. I'll have to double check that, though.

    SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre  -  Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc.
    The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
    #3
    robert_e_bone
    Moderator
    • Total Posts : 8968
    • Joined: 2007/12/26 22:09:28
    • Location: Palatine, IL
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 19:08:20 (permalink)
    Automation?
     
    Would it work to do a 'select all' to get everything selected, then adjust the 'From' to be the point right after where the end of the project SHOULD be, then do a delete?  Wouldn't that get rid of anything beyond what you want as the ending point?
     
    Bob Bone
     

    Wisdom is a giant accumulation of "DOH!"
     
    Sonar: Platinum (x64), X3 (x64) 
    Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22
    Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64
    Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others
    MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es
    Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms  
    #4
    michael diemer
    Max Output Level: -68 dBFS
    • Total Posts : 1128
    • Joined: 2013/05/24 18:54:50
    • Location: Maine, USA
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 20:48:21 (permalink)
    When this happens to me, it usually is due to a long colored section of the track that just continues for no reason. I use the split function to divide it at the true end point, then delete the portion that continues beyond the end. I find I sometimes need to move that section to another track in order to delete it. Also, I am using Sonar 8.5, if that makes any difference.

    michael diemer
    Intel Quad Core i7-3770 Ivy Bridge
    32 GB ram
    1TB Western Digital Black X2
    Microsoft Windows 7 Pro 64
    UR22 interface
    Bandlab Cakewalk/Sonar 8.5 Studio
    GPO-EWQLSO Gold-Vienna SP ED-Cinematic Strings 2
     
     
     
     
    #5
    Kev999
    Max Output Level: -36 dBFS
    • Total Posts : 3922
    • Joined: 2007/05/01 14:22:54
    • Location: Victoria, Australia
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 21:28:20 (permalink)
    I transfer projects back and forth between 3 different computers. Lots of times I have seen the same project always stop at the end on one computer but continue playing past the end on another. I have no clue why this should occur.

    SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)
    FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
    Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
    Having fun at work lately
    #6
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 2003/11/06 14:02:03
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 22:40:12 (permalink)
    99% of the time if I select all, select the region in the timeline, and delete everything, it deletes whatever event created the false ending. Haven't tried Jerry's trimming trick for the other 1%, but I'll give it a try.

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #7
    icontakt
    Max Output Level: -32.5 dBFS
    • Total Posts : 4266
    • Joined: 2012/03/04 08:18:02
    • Location: Tokyo
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/08 23:12:19 (permalink)
    Anderton
    99% of the time if I select all, select the region in the timeline, and delete everything, it deletes whatever event created the false ending.

     
    When you (the OP) do this, make sure you do it in both the Track pane and the Bus pane. The latter might contain automation envelopes, for example.
     
    Kev999
    I transfer projects back and forth between 3 different computers. Lots of times I have seen the same project always stop at the end on one computer but continue playing past the end on another. I have no clue why this should occur.

     
    Check Options - > Stop at Project End in each computer...

    Tak T.
     
    Primary Laptop: Core i7-4710MQ CPU, 16GB RAM, 7200RPM HDD, Windows 7 Home Premium OS (Japanese) x64 SP1
    Secondary Laptop: Core2 Duo CPU, 8GB RAM, 7200RPM HDD, Windows 7 Professional OS (Japanese) x64 SP1
    Audio Interface: iD14 (ASIO)
    Keyboard Controller/MIDI Interface: A-800PRO
    DAW: SONAR Platinum x64 (latest update installed)
    #8
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/09 01:43:19 (permalink)
    Kev999
    I transfer projects back and forth between 3 different computers. Lots of times I have seen the same project always stop at the end on one computer but continue playing past the end on another. I have no clue why this should occur.



    One has Stop at Project End enabled in Track View Options, and one doesn't...? I usually keep this disabled.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #9
    Kev999
    Max Output Level: -36 dBFS
    • Total Posts : 3922
    • Joined: 2007/05/01 14:22:54
    • Location: Victoria, Australia
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/09 02:28:06 (permalink)
    brundlefly
    Kev999
    I transfer projects back and forth between 3 different computers. Lots of times I have seen the same project always stop at the end on one computer but continue playing past the end on another. I have no clue why this should occur.



    One has Stop at Project End enabled in Track View Options, and one doesn't...? I usually keep this disabled.


    I hadn't thought of that. I'll check tomorrow.
     
    EDIT:
    Yes, that was it.
    post edited by Kev999 - 2015/08/10 02:47:20

    SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)
    FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
    Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
    Having fun at work lately
    #10
    dougalex
    Max Output Level: -86 dBFS
    • Total Posts : 244
    • Joined: 2003/11/18 14:22:24
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/15 16:19:31 (permalink)
    Solved
    There were some automation nodes "out there". But weird that they were not shown in the event list view... which is a bug?... or maybe the event list view does not show automation events beyond the point that the last audio/midi clip ends?
    post edited by dougalex - 2015/08/15 16:28:17
    #11
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 2003/11/06 14:02:03
    • Status: offline
    Re: "End of project" is ridiculously way far out beyond actual end 2015/08/15 18:09:24 (permalink)
    Were they audio automation nodes or MIDI automation nodes?

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #12
    Jump to:
    © 2025 APG vNext Commercial Version 5.1