[Solved] Melodyne Blob/no audio not solved for me!

Author
Post
Essentials Only Full Version
donplee
Max Output Level: -89 dBFS
  • Total Posts : 84
  • Joined: 2007/12/12 21:13:19
  • Location: Baja Oklahoma
  • Status: offline
2016/04/04 22:23:29 (permalink)

[Solved] Melodyne Blob/no audio not solved for me!

I posted incorrectly to an old post that said SOLVED. Sorry about the previous post!
 
 I am perplexed. So I worked in Melodyne 2 Editor most of yesterday afternoon, using the Region Effect. No problems. Do a bit of work today, but when the blobs move there is no audio. The vocal track plays normally with correct volume. The green meter in Melodyne is moving. Per Craig's suggestion in this thread, I made sure Input Echo is enabled on the channel. Reboot, no audio. In fact, Melodyne/Region Effect doesn't work on any track on this project, as well as others I have used Melodyne on recently! However, I do get audio if I put Melodyne into the FX Bin and transfer audio in - blobs make noise :-)
 
What am I missing? Is a re-install in order? Any help is appreciated!

Dono in Baja Oklahoma (AKA Frisco, TX.)
 
Another satisfied Studio Cat customer
Quad Core 3.9/16GB
Win 10 64bit 
(3) Drives
Focusrite ISA One Pre
Warm Audio WA-76
Warm Audio EQP-WA
Focusrite Saffire Pro 40
Sonar Platinum (1.17)
BFD3
Guitar Rig 5
THD 3
Garritan Personal Orchestra
 
Please listen to my debut "solo" album, "The Docks of Wilmington" here: https://soundcloud.com/do...mp;utm_medium=facebook
#1

10 Replies Related Threads
    superdan54
    Max Output Level: -80 dBFS
    • Total Posts : 526
    • Joined: 2006/02/10 01:21:54
    • Location: BanjoLand, USA
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2016/04/04 22:33:12 (permalink)
    I'm having the exact same issue in Melodyne Studio 4. There is no audio when clicking on or adjusting blobs, but the note changes are reflected upon playback.
    #2
    mcstringer413
    Max Output Level: -88 dBFS
    • Total Posts : 107
    • Joined: 2014/09/12 21:31:55
    • Location: Berkshire County, MA
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2016/04/04 23:27:25 (permalink)
    superdan54
    I'm having the exact same issue in Melodyne Studio 4. There is no audio when clicking on or adjusting blobs, but the note changes are reflected upon playback.


    I have had this happen recently and just before I created the Melodyne region I had pressed the E key to disable all effects globally, so I could hear a clean, dry vocal while editing in Melodyne. So then, I heard no audio while moving the blobs. When I enabled the global effects again, the audio came back on. So, I just disabled those effects that were individually in the vocal track fx bin and disabled the track sends.

    Sonar Platinum 2017.7, 64-bit, Studio one Pro 3.5.1, Sweetwater Creation Station (cs400v.3), Win10 Home 64 bit, 3.4GHz  i7-4770, 16GB, 2x 1TB Internal, 1TB external, Focusrite Saffire Pro 26, M-Audio Oxygen 25 Midi Controller, JBL LSR305, KRK KNS 8400, Shure SRH440.
    #3
    donplee
    Max Output Level: -89 dBFS
    • Total Posts : 84
    • Joined: 2007/12/12 21:13:19
    • Location: Baja Oklahoma
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2016/04/05 00:44:00 (permalink)
    Thank you! Magically, that did the trick. Wonder what's up with that, though? 
     
    Thanks again.

    Dono in Baja Oklahoma (AKA Frisco, TX.)
     
    Another satisfied Studio Cat customer
    Quad Core 3.9/16GB
    Win 10 64bit 
    (3) Drives
    Focusrite ISA One Pre
    Warm Audio WA-76
    Warm Audio EQP-WA
    Focusrite Saffire Pro 40
    Sonar Platinum (1.17)
    BFD3
    Guitar Rig 5
    THD 3
    Garritan Personal Orchestra
     
    Please listen to my debut "solo" album, "The Docks of Wilmington" here: https://soundcloud.com/do...mp;utm_medium=facebook
    #4
    mcstringer413
    Max Output Level: -88 dBFS
    • Total Posts : 107
    • Joined: 2014/09/12 21:31:55
    • Location: Berkshire County, MA
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2016/04/05 01:57:45 (permalink)
    donplee
    Thank you! Magically, that did the trick. Wonder what's up with that, though? 
     
    Thanks again.


    You are welcome. I'm not sure what's going on there. Another weird thing is if I disable all effects I'm not able to hear the metronome. Probably some connection there.

    Sonar Platinum 2017.7, 64-bit, Studio one Pro 3.5.1, Sweetwater Creation Station (cs400v.3), Win10 Home 64 bit, 3.4GHz  i7-4770, 16GB, 2x 1TB Internal, 1TB external, Focusrite Saffire Pro 26, M-Audio Oxygen 25 Midi Controller, JBL LSR305, KRK KNS 8400, Shure SRH440.
    #5
    superdan54
    Max Output Level: -80 dBFS
    • Total Posts : 526
    • Joined: 2006/02/10 01:21:54
    • Location: BanjoLand, USA
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2016/04/05 11:35:01 (permalink)
    mcstringer413
    donplee
    Thank you! Magically, that did the trick. Wonder what's up with that, though? 
     
    Thanks again.


    You are welcome. I'm not sure what's going on there. Another weird thing is if I disable all effects I'm not able to hear the metronome. Probably some connection there.




    I had the exact same problem...for me if I toggled the fx bypass on and then back off I would get a metronome.
    #6
    mcstringer413
    Max Output Level: -88 dBFS
    • Total Posts : 107
    • Joined: 2014/09/12 21:31:55
    • Location: Berkshire County, MA
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2016/04/05 11:53:11 (permalink)
    superdan54
    mcstringer413
    donplee
    Thank you! Magically, that did the trick. Wonder what's up with that, though? 
     
    Thanks again.


    You are welcome. I'm not sure what's going on there. Another weird thing is if I disable all effects I'm not able to hear the metronome. Probably some connection there.




    I had the exact same problem...for me if I toggled the fx bypass on and then back off I would get a metronome.


    Thanks for that tip.

    Sonar Platinum 2017.7, 64-bit, Studio one Pro 3.5.1, Sweetwater Creation Station (cs400v.3), Win10 Home 64 bit, 3.4GHz  i7-4770, 16GB, 2x 1TB Internal, 1TB external, Focusrite Saffire Pro 26, M-Audio Oxygen 25 Midi Controller, JBL LSR305, KRK KNS 8400, Shure SRH440.
    #7
    mburris
    Max Output Level: -90 dBFS
    • Total Posts : 2
    • Joined: 2016/10/17 13:38:14
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2017/05/29 06:36:37 (permalink)
    my blobs just appear in a straight line and do not go to their respective places to represent the notes. It was working fine before.
    #8
    dlesaux
    Max Output Level: -70 dBFS
    • Total Posts : 1034
    • Joined: 2009/09/13 09:25:18
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2017/05/29 09:18:18 (permalink)
    You need to give that track focus to hear the sound of the blobs. Just click on the track.

    Peace!
    Daniel

    Sonar Platinum - 2017.10 and PreSonus Studio One 3.5.5
    Windows 10 64 bit
    Studiocat Skylake Desktop PC with Intel i7 6700k processor @ 4.20 GHz / 16G RAM 
    Focusrite Scarlett 2i2 Audio Interface and Cakewalk UM-2G Midi Interface
    Check out my website
    #9
    VinylJunkie
    Max Output Level: -72 dBFS
    • Total Posts : 939
    • Joined: 2008/07/25 08:40:45
    • Location: UK
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2017/05/29 10:14:04 (permalink)
    mburris
    my blobs just appear in a straight line and do not go to their respective places to represent the notes. It was working fine before.




    Have you changed the detection algorithm to a non polyphonic one?
     

    VJ
    #10
    VinylJunkie
    Max Output Level: -72 dBFS
    • Total Posts : 939
    • Joined: 2008/07/25 08:40:45
    • Location: UK
    • Status: offline
    Re: Melodyne Blob/no audio not solved for me! 2017/05/29 10:21:04 (permalink)
    superdan54
    I'm having the exact same issue in Melodyne Studio 4. There is no audio when clicking on or adjusting blobs, but the note changes are reflected upon playback.




    In Melodyne Editor is Options>Note Editor>Monitor When Editing Blobs ticked?

    VJ
    #11
    Jump to:
    © 2024 APG vNext Commercial Version 5.1