Sonar 8.5 PE - Fireface 800 -- No Audio is recording
This is a new setup and although I am pretty technical - so most everything appears to be working, except getting audio to a track.
I believe am overlooking some setting...
Synopsis: (WinXP Sp3 32bit / 3.2Ghz QuadE / Sonar PE 8.5.3)
RME Fireface 800 (FF800)
- FF 800 driver is 2.992 ASIO (Have tried newest versions - too buggy..2.992 is solid)
- Using analog input 1 (FF800 software set correctly for AN input 1 on front)
- Firefacemix is routing AN1-input to AN1-output / and PHL & PHR (Phones L R)
- Levels show input and output signal in fireface mix. (And as noted below also in Sonar)
Sonar audio setup:
anaglog Audio inputs AND outputs selected- " Analog ASIO Fireface 1 /3 /5 /7 /9"
New blank project:
Insert audio track-
- INPUT: Left ASIO Fireface AN 1 (Options would be:"Left ASIO Fireface AN1""Right ASIO Fireface AN1""Stereo ASIO Fireface AN1" )
Insert New stereo Bus:
- OUTPUT: "Master" to- "Fireface ASIO AN9"
PROBLEM: No audio is recorded to the track
I get signal when the track is armed / recording but no data records to the track.
It appears as if everything is working except that.
Any insights are appreciated, thanks