Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
Here's my first reports...
Knowing that these need to be updated for X1c before I try, I thought I would anyway to see what happens...
Skinner complained, but worked fine to both edit and restore factory
Sonar Plus blew up trying to auto-load Sonar, but seems to work fine when manually opening after Sonar X1c is running (gives warning)
Sonar Mods will not install complaining that the dll is "wrong"....
So I'm sure you guys are busy with your lives as well as checking out the new X1c.... Have fun and know that we still use your work, and still need you if/when you have the kung fu to further enhance your wonderful work!
HA! I just fooled the system (we'll see if it has repercussions). I used a safety of my Panu-Mod, Skinner-edited ttsrew90 and it's got my braphics back where they we're... Getting around the Mod's inability to use the X1c ttsres90 file....
Let's see if this will post. Last attempt failed!
Much Thanks...
Keni
|
panup
Max Output Level: -50 dBFS
- Total Posts : 2538
- Joined: 2006/05/23 09:34:35
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 14:17:23
(permalink)
I tested darkside 1.31 X1b English x64. It installed perfectly and now I've got X1c with Dark Side.
More compatibility info coming later at sonarmods.com forum.
|
jps
Max Output Level: -85 dBFS
- Total Posts : 280
- Joined: 2007/10/05 09:25:48
- Location: NORWAY
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 14:21:00
(permalink)
Keni ,
I have the same problem with the Sonar mods .
Hopefully Panup will update ASAP , I need my Dark Side !!!
All the best
Jan
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 14:28:51
(permalink)
As I mentioned in another post.
Reindeer 1.33 for X1b works fine for me as do the rounded faders. i didn't even bother uninstalling the mods before I updated figuring that TTRes90.dll would be updated by X1C and it was.
Both the TTSRes90.dll and SONARPDR.exe are at version 18.0.3.319
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 14:58:13
(permalink)
i Cna't get SONAR Plus to work anymore
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 15:01:07
(permalink)
X1c would be pretty pointless w/o Sonar Plus, guess i will wait. though it appears the update for Darkside for X1c is already done;)
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
cyphersuit
Max Output Level: -84 dBFS
- Total Posts : 339
- Joined: 2009/09/15 15:58:06
- Location: Germany
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 16:22:18
(permalink)
wetdentist
X1c would be pretty pointless w/o Sonar Plus, guess i will wait. though it appears the update for Darkside for X1c is already done;)
i will wait for Sonar Plus, too.
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 16:29:25
(permalink)
mudgel
i Cna't get SONAR Plus to work anymore
Did you try running it manually? I mean to first open Sonar by itself, and then load Sonar plus... Not using the sonar-auto-start function Plus has...? Keni
|
panup
Max Output Level: -50 dBFS
- Total Posts : 2538
- Joined: 2006/05/23 09:34:35
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 16:31:53
(permalink)
I tried. Sonar Plus opens from the Utilities Menu!
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:05:30
(permalink)
Yes... It runs fine that way here too...
But I found a major problem for me here...
I just discovered that using the Orfeus 2.04 mod with my alterations (the old ttres90 from before installing X1c) is casuing a bad situation somehow...
I cannot open PRV... It crashes X1c everytime (PRV is in MSI mode)
As soon as I revert to the X1c ttres90, all is well (except for my eyes.... I forgot how hard it is for me to look at the normal X1 "colors"... <sigh>...
Keni
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:08:54
(permalink)
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:25:01
(permalink)
MSI mode makes the PRV open as it did in 8.5.3 instead of in the multidock (which I don't use at all)
|
benstat
Max Output Level: -71 dBFS
- Total Posts : 972
- Joined: 2007/09/17 10:57:51
- Location: UK
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:25:51
(permalink)
Hi Folks,
Unfortunately (well, fortunately for me!), I'm on vacation next week, and up to my eyeballs in deadlines for the rest of this week. Rest assured I will update SONAR Plus and the Skin Editor, but it won't be for a couple of weeks I'm afraid.
The good news is that Plus still works (as Keni and others have already pointed out), but for the moment you have to start SONAR first, and then run Plus afterwards via the SONAR Utilities menu.
I'll be back!
Ben
My DAW: Intel i5, Cakewalk UA-1G, Win7 64 bit, SONAR X1a Producer 64 bit
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:27:17
(permalink)
An issue if using the old X1b ttsres90.dll with X1c....
I don't know if everyone will run into this (or other things), but here's one item that's a bad problem.... There's something different about the dll and using the old one caused my PRV not to open and crash Sonar.... So I doubt it's the actual mod that's the issue. More liekly some other item different between the two dll's...
Keep an eye out...
Keni
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:28:20
(permalink)
Isn't that called MDI? As in "Multiple Document Interface"?
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:28:49
(permalink)
Not that it matters. Glad to see you've got it sorted out for now.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:35:08
(permalink)
MDI? That could be... I think maybe msi is another file type for downloads/updates?
sorry for the confusion... and thanks for the correction...
Also a note...
I can use Sonar Skinner to apply the color changes of my old setup to the new ttres90 and all is well as far as Sonar operation... It's no longer a problem as the correct ttres90 is now in use... Two issues to note here...
1) Sonar Skinner reminds me that the skin was designed for a newer (Yeah, I know that's backwards) version of Sonar, then proceeds to apply it with no problems...
2) certain items that Skinner doesn't yet support are not modified as they were by applying Panup's Sonar Mod
I previously had to first apply the mod, then merge my update... so for now, I've got a few things "not quite right", but at least everything is working (so far?)...
Keni
|
panup
Max Output Level: -50 dBFS
- Total Posts : 2538
- Joined: 2006/05/23 09:34:35
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:45:47
(permalink)
There are a few additions in the X1c TTSRES90.dll file and using X1b dll will cause nothing but harm (just to warn if someone still wants to try this). I don't go in details because our Big Brother would get nervous but you just can't use X1b's dll with X1c.
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:50:46
(permalink)
benstat
Hi Folks,
Unfortunately (well, fortunately for me!), I'm on vacation next week, and up to my eyeballs in deadlines for the rest of this week. Rest assured I will update SONAR Plus and the Skin Editor, but it won't be for a couple of weeks I'm afraid.
The good news is that Plus still works (as Keni and others have already pointed out), but for the moment you have to start SONAR first, and then run Plus afterwards via the SONAR Utilities menu.
I'll be back!
Ben
Hi benstat... I hope you have a great vacation! I believe it's well earned even if only for the work on Sonar's issues... But I'm guessing you do that and more at your income-generating work, eh? ;-) Have FUN! Keni
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re:Sonar Plus, Sonar Skinner, and Panup's Mods with X1c
2011/08/15 17:52:36
(permalink)
panup
There are a few additions in the X1c TTSRES90.dll file and using X1b dll will cause nothing but harm (just to warn if someone still wants to try this). I don't go in details because our Big Brother would get nervous but you just can't use X1b's dll with X1c.
So I've discovered! ;-) But it was worth the try.... Keni
|