easyjoey
Max Output Level: -86 dBFS
- Total Posts : 237
- Joined: 2004/03/22 14:05:03
- Location: Indianapolis, IN
- Status: offline
Sonar X3e crashing when opening Maschine 2 2.3.0 projects
Ever since I updated Maschine 2 to the latest OS 2.3.0, sonar crashes when I close a project running Maschine 2 and open another project running Maschine 2.
I have talked with cakewalk tech support and they had me send them the minidump files. They then recommended me to download all of the C++ redistribution files. This resulted in the same crashes. Next they had me do a clean instal of Sonar X3. Sadly this resulted in the same problem.
Tonight I talked with the NI tech support team and they asked that I reinstall Sonar X3 using administrative rights and then reinstall !aschine 2 2.3.0 using administrative rights. Again, this results in the sa,e problem. Interestingly, rolling back Maschine 2 to the prior OS does not result in crashes. I would leave it that way but I have tracks using 2.3.0 that will not load with the prior OS.
Have any of you experienced this problem? What was the solution? Does anyone have any suggestions?
Thanks for you time
Joe
www.soundcloud.com/angryredplanet Sonar Platinum, Core i7 950, 6 gig RAM, Win7 64, Echo Layla 24 PCI sound card, MOTU 8x8 / Moog Voyager / Moog Sub37 / Access Virus B / Access Virus TI2 Polar / Roland V-Synth / Elektron Analog Four / DSI Tempest / DSI Pro 2 / Waldorf Q / Roland XV-3080
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/27 07:38:56
(permalink)
yes. same problem & NI announced a 2.3.1 update yesterday & it mentioned nothing about the Sonar problem. this issue sucks. i think all the Sonar people over at the Maschine forum are having this happen to them whether they use Sonar Platinum or X3e or whatever.
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
Doktor Avalanche 
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/27 08:48:22
(permalink)
It appears very disappointing update for Maschine coming our way, way too little too late. Clearly they are choosing the easy bug fix option rather than the important. There is still a chance this issue might be resolved, it just might not be documented.
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
easyjoey
Max Output Level: -86 dBFS
- Total Posts : 237
- Joined: 2004/03/22 14:05:03
- Location: Indianapolis, IN
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/27 09:01:17
(permalink)
Well at least I am not alone with this issue. Sadly, the tech support guys at both Cakewalk and NI said they had never heard of this issue.
Because this only happens with Maschine 2.3.0 and no earlier versions, I tend to think this is a Machine issue and not a Sonar issue. Let's hope the new Maschine update resolves this issue.
Thanks
Joe
www.soundcloud.com/angryredplanet Sonar Platinum, Core i7 950, 6 gig RAM, Win7 64, Echo Layla 24 PCI sound card, MOTU 8x8 / Moog Voyager / Moog Sub37 / Access Virus B / Access Virus TI2 Polar / Roland V-Synth / Elektron Analog Four / DSI Tempest / DSI Pro 2 / Waldorf Q / Roland XV-3080
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/27 15:50:52
(permalink)
☄ Helpfulby easyjoey 2015/08/27 18:29:07
You sometimes wonder how they can even function...
It's been logged both with NI and Cakewalk I believe.. looks like a NI issue though.
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
twisted6s
Max Output Level: -55 dBFS
- Total Posts : 2001
- Joined: 2007/08/21 21:10:33
- Location: New York
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/28 14:59:48
(permalink)
I had the same issue with version 2.3, I rolled back to version 2.2.3 everything went back to working normally.
post edited by twisted6s - 2015/08/28 15:08:13
|
soundsubs
Max Output Level: -81 dBFS
- Total Posts : 496
- Joined: 2003/11/13 13:28:52
- Location: denver
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/28 15:14:17
(permalink)
I resolved my issues with Maschine 2.3 by unplugging my Maschine hardware. Please try that.
Based on that, I troubleshot it down to a particular USB port. Changed USB ports it was plugged into, and voila, Maschine now works.
Sonar Platinum | modular synthesizers galoreWin 10 // Dell Xeon's | RME UFX | Maschine 2.3 | Virus TI | Roland System-1
|
easyjoey
Max Output Level: -86 dBFS
- Total Posts : 237
- Joined: 2004/03/22 14:05:03
- Location: Indianapolis, IN
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/29 11:05:07
(permalink)
Sound subs, Maschine 2.3 is working for you now that you changed USB ports?
Thanks
Joe
www.soundcloud.com/angryredplanet Sonar Platinum, Core i7 950, 6 gig RAM, Win7 64, Echo Layla 24 PCI sound card, MOTU 8x8 / Moog Voyager / Moog Sub37 / Access Virus B / Access Virus TI2 Polar / Roland V-Synth / Elektron Analog Four / DSI Tempest / DSI Pro 2 / Waldorf Q / Roland XV-3080
|
soundsubs
Max Output Level: -81 dBFS
- Total Posts : 496
- Joined: 2003/11/13 13:28:52
- Location: denver
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/08/29 20:07:49
(permalink)
Yes.
Maschine 2.3 is working for me under the latest Cakewalk Platinum and Windows 10.
Even though I never changed the ports that the hardware was plugged into, changing the ports later fixed it. I initially stumbled on this by unplugging the hardware and noting that Maschine worked fine-- where it was crashing after a couple loops before.
Sonar Platinum | modular synthesizers galoreWin 10 // Dell Xeon's | RME UFX | Maschine 2.3 | Virus TI | Roland System-1
|
easyjoey
Max Output Level: -86 dBFS
- Total Posts : 237
- Joined: 2004/03/22 14:05:03
- Location: Indianapolis, IN
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/20 11:00:22
(permalink)
I have talked with Cakewalk and NI about this issue. NI says they are working with cakewalk on is issue. Since this only affects cakewalk users, I wonder if cakewalk will someone fix this (even ough it's an NI issue) in their next update release?
www.soundcloud.com/angryredplanet Sonar Platinum, Core i7 950, 6 gig RAM, Win7 64, Echo Layla 24 PCI sound card, MOTU 8x8 / Moog Voyager / Moog Sub37 / Access Virus B / Access Virus TI2 Polar / Roland V-Synth / Elektron Analog Four / DSI Tempest / DSI Pro 2 / Waldorf Q / Roland XV-3080
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/20 11:04:10
(permalink)
☄ Helpfulby wetdentist 2015/10/20 11:44:42
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
easyjoey
Max Output Level: -86 dBFS
- Total Posts : 237
- Joined: 2004/03/22 14:05:03
- Location: Indianapolis, IN
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/20 12:11:23
(permalink)
Yeah I am on hat thread and have posted several times. I was just thinking that possibly NI was passing the buck since only cakewalk users experience the problem. Obviously I hope it wrong. I just want a fix ASAP.
www.soundcloud.com/angryredplanet Sonar Platinum, Core i7 950, 6 gig RAM, Win7 64, Echo Layla 24 PCI sound card, MOTU 8x8 / Moog Voyager / Moog Sub37 / Access Virus B / Access Virus TI2 Polar / Roland V-Synth / Elektron Analog Four / DSI Tempest / DSI Pro 2 / Waldorf Q / Roland XV-3080
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/29 10:19:35
(permalink)
☄ Helpfulby Doktor Avalanche 2015/10/29 14:23:45
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
SGodfrey
Max Output Level: -85 dBFS
- Total Posts : 268
- Joined: 2012/03/27 14:13:57
- Location: Bures, Suffolk. UK
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/29 14:09:03
(permalink)
That is good news!
Hadn't dared try Sonar and my new Machine Mikro together in view of the error. Looks like I'll soon be able to try it out!
Sonar Platinum x64 Cakewalk UA-25EX Asus X556UA-DM898T i7-7500U 8GB 1TB, Windows 10 Home Komplete 11 Ultimate, Kontrol S49, Maschine Jam, Mikro mk2, Arturia V Collection 4
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/29 14:13:45
(permalink)
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
SGodfrey
Max Output Level: -85 dBFS
- Total Posts : 268
- Joined: 2012/03/27 14:13:57
- Location: Bures, Suffolk. UK
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/29 15:00:00
(permalink)
Guys,
Could you let us know how you get on, when the fix comes out please?
Sonar Platinum x64 Cakewalk UA-25EX Asus X556UA-DM898T i7-7500U 8GB 1TB, Windows 10 Home Komplete 11 Ultimate, Kontrol S49, Maschine Jam, Mikro mk2, Arturia V Collection 4
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/29 18:14:45
(permalink)
Funny I was going to say the same thing ;)
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
easyjoey
Max Output Level: -86 dBFS
- Total Posts : 237
- Joined: 2004/03/22 14:05:03
- Location: Indianapolis, IN
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/30 00:39:42
(permalink)
I will give it a try as soon as it comes out. This has been very frustrating to say the least.
www.soundcloud.com/angryredplanet Sonar Platinum, Core i7 950, 6 gig RAM, Win7 64, Echo Layla 24 PCI sound card, MOTU 8x8 / Moog Voyager / Moog Sub37 / Access Virus B / Access Virus TI2 Polar / Roland V-Synth / Elektron Analog Four / DSI Tempest / DSI Pro 2 / Waldorf Q / Roland XV-3080
|
twisted6s
Max Output Level: -55 dBFS
- Total Posts : 2001
- Joined: 2007/08/21 21:10:33
- Location: New York
- Status: offline
Re: Sonar X3e crashing when opening Maschine 2 2.3.0 projects
2015/10/30 11:07:24
(permalink)
The Sonar aspects seem vague in the list of fixes. Maschine 2 2.3 also couldn't be configured as a multitimbral vst in Sonar. 2.2.1 did this with no problem.
|