Studio-Capture 1610 hangup!
Hi,guys,
I posted a thread in the Sonar x2 forum a while back about my brand new pair of Roland Studio-Captures. If you get a chance maybe you can find some helpful info about the setup and installation of these things.
I had a problem for a while with the shutdown. Whenever I turned the computer off, I could turn off the SCs. When I came back to work I would switch on the SCs, then the computer. THEN, when the computer booted it said that one of the SCs had an error and would not work. I turn off the computer and, lo and behold, you could not turn off the SCs! The only way to turn them off was to disconnect the power cable.
As it turns out, the problem was the auto-shutdown on the SCs was set for 4 hours. When I turned off the auto-shutdown, everything works like a top.
I hope this is of some help to some of you out there. I had chased this problem for at least a month!
Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!