TTS1 Not allowing instrument selection anymore

Author
Mychael628
Max Output Level: -88 dBFS
  • Total Posts : 105
  • Joined: 2006/11/27 17:23:07
  • Location: Florida
  • Status: offline
2014/11/13 23:24:57 (permalink)

TTS1 Not allowing instrument selection anymore

I just ran into this problem while working on a project.
 
I have TTS 1 inserted into a project with CH 1 as a warm pad and CH 2 as strings. I decided I wanted to change(audition)to a different string set on CH 2. When I right click to see the presets. NOTHING ! It will not allow me to select any instr on ANY channel.I've tried opening/closing session, rebooting inserting a 2nd TTS but get the same result there. There is audio output to what I had earlier designated that I can hear fine, I just can't create or change instruments.
 
Anyone had this problem?
 
I've rebooted and still nothing.
 
Hints: since insertion the icon in synth rack is greyed out. This happened with the new synth I tried as an experiment. Also, I had just done a FREEZE and unfreeze synth earlier in my work.
 
Thanks for any help.
~Michael~
 

Singer-songwriter-radio personality.....
Michael Stone
Michael Stone Music
Michael Stone BLOG
AudioPros.com
AudioPros BLOG
Michael Stone Radio BITS
Sonar PLATINUM - Dell XPS 750-  6 GB ram - Windows 7 - Intel i7 CPU -920 @ 2.67 ghz- 64 bit -
Korg digital piano - Rode NT1 - Shure SM7 - Ovation - Ibanez Elec - Fender Telecaster -Wechter Acoustic


#1

4 Replies Related Threads

    Guitarhacker
    Max Output Level: 0 dBFS
    • Total Posts : 24398
    • Joined: 2007/12/07 12:51:18
    • Location: NC
    • Status: offline
    Re: TTS1 Not allowing instrument selection anymore 2014/11/14 13:52:04 (permalink)
    Have you tried to load a different or a new project to see if this carries over or if it just affects that one project? 
     
    I seem to recall in the past that I had a similar issue. Apparently the project had gotten corrupted somehow and nothing would work right.... it played but I could add or change the synths.
     
    I ended up creating a new project and copied the midi tracks and audio over to the new project. Everything worked perfectly in the new project so I deleted the old broken one.  I only recall this happening one time..... don't know what caused it.

    My website & music: www.herbhartley.com

    MC4/5/6/X1e.c, on a Custom DAW   
    Focusrite Firewire Saffire Interface


    BMI/NSAI

    "Just as the blade chooses the warrior, so too, the song chooses the writer 
    #2
    Mychael628
    Max Output Level: -88 dBFS
    • Total Posts : 105
    • Joined: 2006/11/27 17:23:07
    • Location: Florida
    • Status: offline
    Re: TTS1 Not allowing instrument selection anymore 2014/11/15 04:27:13 (permalink)
    I was getting ready to try your suggestion, when I found a work around.
     
    Rather than try to bring up the pre-sets by right clicking the midi channel, I click the button at the top of the channel, which brings up the edit functions, which then allowed me the ability to access the different pre-sets. Not sure why, but it worked. TTS is working normally in all other projects right now, so I guess I'm good.
     
    But I think this will be the way I access the pre-sets in the future anyway. It allows for more immediate manipulation... TH

    Michael
     

    Singer-songwriter-radio personality.....
    Michael Stone
    Michael Stone Music
    Michael Stone BLOG
    AudioPros.com
    AudioPros BLOG
    Michael Stone Radio BITS
    Sonar PLATINUM - Dell XPS 750-  6 GB ram - Windows 7 - Intel i7 CPU -920 @ 2.67 ghz- 64 bit -
    Korg digital piano - Rode NT1 - Shure SM7 - Ovation - Ibanez Elec - Fender Telecaster -Wechter Acoustic


    #3
    swamptooth
    Max Output Level: -53 dBFS
    • Total Posts : 2229
    • Joined: 2012/04/16 15:44:21
    • Status: offline
    Re: TTS1 Not allowing instrument selection anymore 2014/11/15 23:55:57 (permalink)
    Hi Michael, 
    Unless you have your mouse set up with reversed buttons, right-clicking does not bring up presets.  you left-click the preset name next to the volume slider.  Hope I didn't misread your post.

     
    Arvid H. Peterson
    Sonar X3E Prod / X2A  / X1PE | Cubase 9.5.1 | Reason 9.5 | Sibelius7 | Pure Data
    Native-Instruments Komplete 10 Ultimate and a smattering of other plugins
    Home-brewed VSTs 
    Toshiba Satellite S855-S5378 (16GB RAM, modified with 2x 750GB HDDs, Windows 8.1 x64)  
    Samson Graphite 49, M-Audio Oxygen 49, Korg nanoPAD2, Webcam motion tracking programs 
    M-Audio Fast Track Ultra
    Member, ASCAP   


    #4
    robert_e_bone
    Moderator
    • Total Posts : 8968
    • Joined: 2007/12/26 22:09:28
    • Location: Palatine, IL
    • Status: offline
    Re: TTS1 Not allowing instrument selection anymore 2014/12/07 11:24:42 (permalink)
    Good call, Arvid.  I was just going to post the same thing.
     
    Bob Bone
     

    Wisdom is a giant accumulation of "DOH!"
     
    Sonar: Platinum (x64), X3 (x64) 
    Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22
    Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64
    Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others
    MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es
    Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms  
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1